linux.git/drivers/char/hw_random/Makefile, branch v6.0 Linux kernel source tree hwrng: mpfs - add polarfire soc hwrng support 2022-04-15T08:34:28+00:00 Conor Dooley conor.dooley@microchip.com 2022-04-08T10:09:12+00:00 716a757c83ad6208a743dd8fb1577055d0867ee8 Add a driver to access the hardware random number generator on the Polarfire SoC. The hwrng can only be accessed via the system controller, so use the mailbox interface the system controller exposes to access the hwrng. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Add a driver to access the hardware random number generator on the
Polarfire SoC. The hwrng can only be accessed via the system controller,
so use the mailbox interface the system controller exposes to access the
hwrng.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux 2022-01-14T14:08:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-01-14T14:08:36+00:00 3fb561b1e0bf4c75bc5f4d799845b08fa5ab3853 Pull MIPS updates from Thomas Bogendoerfer: - add support for more BCM47XX based devices - add MIPS support for brcmstb PCIe controller - add Loongson 2K1000 reset driver - remove board support for rbtx4938/rbtx4939 - remove support for TX4939 SoCs - fixes and cleanups * tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits) MIPS: ath79: drop _machine_restart again PCI: brcmstb: Augment driver for MIPs SOCs MIPS: bmips: Remove obsolete DMA mapping support MIPS: bmips: Add support PCIe controller device nodes dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs MIPS: compressed: Fix build with ZSTD compression MIPS: BCM47XX: Add support for Netgear WN2500RP v1 & v2 MIPS: BCM47XX: Add support for Netgear R6300 v1 MIPS: BCM47XX: Add LEDs and buttons for Asus RTN-10U MIPS: BCM47XX: Add board entry for Linksys WRT320N v1 MIPS: BCM47XX: Define Linksys WRT310N V2 buttons MIPS: Remove duplicated include in local.h MIPS: retire "asm/llsc.h" MIPS: rework local_t operation on MIPS64 MIPS: fix local_{add,sub}_return on MIPS64 mips/pci: remove redundant ret variable MIPS: Loongson64: Add missing of_node_put() in ls2k_reset_init() MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS MIPS: enable both vmlinux.gz.itb and vmlinuz for generic MIPS: signal: Return immediately if call fails ... 
Pull MIPS updates from Thomas Bogendoerfer:

 - add support for more BCM47XX based devices

 - add MIPS support for brcmstb PCIe controller

 - add Loongson 2K1000 reset driver

 - remove board support for rbtx4938/rbtx4939

 - remove support for TX4939 SoCs

 - fixes and cleanups

* tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits)
  MIPS: ath79: drop _machine_restart again
  PCI: brcmstb: Augment driver for MIPs SOCs
  MIPS: bmips: Remove obsolete DMA mapping support
  MIPS: bmips: Add support PCIe controller device nodes
  dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs
  MIPS: compressed: Fix build with ZSTD compression
  MIPS: BCM47XX: Add support for Netgear WN2500RP v1 & v2
  MIPS: BCM47XX: Add support for Netgear R6300 v1
  MIPS: BCM47XX: Add LEDs and buttons for Asus RTN-10U
  MIPS: BCM47XX: Add board entry for Linksys WRT320N v1
  MIPS: BCM47XX: Define Linksys WRT310N V2 buttons
  MIPS: Remove duplicated include in local.h
  MIPS: retire "asm/llsc.h"
  MIPS: rework local_t operation on MIPS64
  MIPS: fix local_{add,sub}_return on MIPS64
  mips/pci: remove redundant ret variable
  MIPS: Loongson64: Add missing of_node_put() in ls2k_reset_init()
  MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS
  MIPS: enable both vmlinux.gz.itb and vmlinuz for generic
  MIPS: signal: Return immediately if call fails
  ...
MIPS: TXX9: Remove TX4939 SoC support 2022-01-02T13:12:03+00:00 Thomas Bogendoerfer tsbogend@alpha.franken.de 2021-11-30T16:45:56+00:00 fc5bb239d5b3500d034559e0c5ecb67bbae69de7 After removal of RBTX4939 board support remove code for the TX4939 SoC. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> 
After removal of RBTX4939 board support remove code for the TX4939 SoC.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
hwrng: cn10k - Add random number generator support 2021-12-24T03:18:22+00:00 Sunil Goutham sgoutham@marvell.com 2021-12-14T10:51:08+00:00 38e9791a02090414d1e3433549001689cad71098 CN10K series of silicons support true random number generators. This patch adds support for the same. Also supports entropy health status checking. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by: Joseph Longever <jlongever@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
CN10K series of silicons support true random number
generators. This patch adds support for the same. Also
supports entropy health status checking.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Joseph Longever <jlongever@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: Add Arm SMCCC TRNG based driver 2021-08-06T11:45:26+00:00 Andre Przywara andre.przywara@arm.com 2021-07-31T20:48:45+00:00 0888d04b47a165ae8c429c6fe11b3c43f5017f31 The "Arm True Random Number Generator Firmware Interface"[1] provides an SMCCC based interface to a true hardware random number generator. So far we are using that in arch_get_random_seed(), but it might be useful to expose the entropy through the /dev/hwrng device as well. This allows to assess the quality of the implementation, by using "rngtest" from the rng-tools package, for example. Add a simple platform driver implementing the hw_random interface. The corresponding platform device is created by the SMCCC core code, we just match it here by name and provide a module alias. Since the firmware takes care about serialisation, this can happily coexist with the arch_get_random_seed() bits. [1] https://developer.arm.com/documentation/den0098/latest/ Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
The "Arm True Random Number Generator Firmware Interface"[1] provides
an SMCCC based interface to a true hardware random number generator.
So far we are using that in arch_get_random_seed(), but it might be
useful to expose the entropy through the /dev/hwrng device as well. This
allows to assess the quality of the implementation, by using "rngtest"
from the rng-tools package, for example.

Add a simple platform driver implementing the hw_random interface.
The corresponding platform device is created by the SMCCC core code,
we just match it here by name and provide a module alias.

Since the firmware takes care about serialisation, this can happily
coexist with the arch_get_random_seed() bits.

[1] https://developer.arm.com/documentation/den0098/latest/

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: hisi - remove HiSilicon TRNG driver 2020-11-27T06:13:42+00:00 Weili Qian qianweili@huawei.com 2020-11-20T09:02:31+00:00 4e0b858b1a8f165016d124c7c1e2baed88f6250f Driver of HiSilicon true random number generator(TRNG) is removed from 'drivers/char/hw_random'. Both 'Kunpeng 920' and 'Kunpeng 930' chips have TRNG, however, PRNG is only supported by 'Kunpeng 930'. So, this driver is moved to 'drivers/crypto/hisilicon/trng/' in the next to enable the two's TRNG better. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Driver of HiSilicon true random number generator(TRNG)
is removed from 'drivers/char/hw_random'.

Both 'Kunpeng 920' and 'Kunpeng 930' chips have TRNG,
however, PRNG is only supported by 'Kunpeng 930'.
So, this driver is moved to 'drivers/crypto/hisilicon/trng/'
in the next to enable the two's TRNG better.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: ingenic - Add hardware TRNG for Ingenic X1830 2020-09-25T07:46:41+00:00 周琰杰 (Zhou Yanjie) zhouyanjie@wanyeetech.com 2020-09-13T16:10:21+00:00 406346d2227854bd9a5abdf07ef3d45d0de85a3e Add X1830 SoC digital true random number generator driver. Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Add X1830 SoC digital true random number generator driver.

Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: xiphera-trng: add support for XIP8001B hwrng 2020-09-11T04:39:17+00:00 Atte Tommiska atte.tommiska@xiphera.com 2020-09-02T10:28:17+00:00 cb435fa642ebbb348d336aa46669c0881dd435bc Xiphera XIP8001B is an FPGA-based True Random Number Generator Intellectual Property (IP) Core which can be instantiated in multiple FPGA families. This driver adds Linux support for it through the hwrng interface. Signed-off-by: Atte Tommiska <atte.tommiska@xiphera.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Xiphera XIP8001B is an FPGA-based True Random Number Generator
Intellectual Property (IP) Core which can be instantiated in
multiple FPGA families. This driver adds Linux support for it through
the hwrng interface.

Signed-off-by: Atte Tommiska <atte.tommiska@xiphera.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000 2020-07-31T08:25:28+00:00 周琰杰 (Zhou Yanjie) zhouyanjie@wanyeetech.com 2020-07-23T06:24:46+00:00 190873a0ea4500433ae818521cad20d37f9ee059 Add JZ4780 SoC and X1000 SoC random number generator driver, based on PrasannaKumar Muralidharan's JZ4780 RNG driver. Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Tested-by: Mathieu Malaterre <malat@debian.org> Suggested-by: Jeffrey Walton <noloader@gmail.com> Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Add JZ4780 SoC and X1000 SoC random number generator driver,
based on PrasannaKumar Muralidharan's JZ4780 RNG driver.

Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Tested-by: Mathieu Malaterre <malat@debian.org>
Suggested-by: Jeffrey Walton <noloader@gmail.com>
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: ba431 - add support for BA431 hwrng 2020-06-18T07:19:44+00:00 Olivier Sobrie olivier.sobrie@silexinsight.com 2020-06-01T14:27:40+00:00 0289e9be5dc26d84dda6fc5492f08ca1ff599744 Silex insight BA431 is an IP designed to generate random numbers that can be integrated in various FPGA. This driver adds support for it through the hwrng interface. This driver is used in Silex Insight Viper OEM boards. Signed-off-by: Olivier Sobrie <olivier.sobrie@silexinsight.com> Signed-off-by: Waleed Ziad <waleed94ziad@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 
Silex insight BA431 is an IP designed to generate random numbers that
can be integrated in various FPGA.
This driver adds support for it through the hwrng interface.

This driver is used in Silex Insight Viper OEM boards.

Signed-off-by: Olivier Sobrie <olivier.sobrie@silexinsight.com>
Signed-off-by: Waleed Ziad <waleed94ziad@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>