Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
- A driver for SCU (system control) on NXP i.MX8QXP
- Qualcomm Always-on Subsystem messaging driver (AOSS QMP)
- Qualcomm PM support for MSM8998
- Support for a newer version of DRAM PHY driver for Broadcom (DPFE)
- Reset controller support for Bitmain BM1880
- TI SCI (System Control Interface) support for CPU control on AM654
processors
- More TI sysc refactoring and rework"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits)
reset: remove redundant null check on pointer dev
soc: rockchip: work around clang warning
dt-bindings: reset: imx7: Fix the spelling of 'indices'
soc: imx: Add i.MX8MN SoC driver support
soc: aspeed: lpc-ctrl: Fix probe error handling
soc: qcom: geni: Add support for ACPI
firmware: ti_sci: Fix gcc unused-but-set-variable warning
firmware: ti_sci: Use the correct style for SPDX License Identifier
soc: imx8: Use existing of_root directly
soc: imx8: Fix potential kernel dump in error path
firmware/psci: psci_checker: Park kthreads before stopping them
memory: move jedec_ddr.h from include/memory to drivers/memory/
memory: move jedec_ddr_data.c from lib/ to drivers/memory/
MAINTAINERS: Remove myself as qcom maintainer
soc: aspeed: lpc-ctrl: make parameter optional
soc: qcom: apr: Don't use reg for domain id
soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
memory: tegra: Fix -Wunused-const-variable
firmware: tegra: Early resume BPMP
soc/tegra: Select pinctrl for Tegra194
...
Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ti-sysc interconnect target module driver changes for v5.3 This series of changes improves probing devices with ti-sysc to the point where we can now probe most devices without the custom dts property "ti,hwmods" and no legacy platform data :) We add support for platform data callbacks for idling and unidling the clockdomain the module belongs to. The rest of the series mostly adds handling for the various quirks needed by old legacy modules such as i2c and watchdog. Some quirk handling is still missing for few modules, but those will be added as they get tested. The related platform data and dts changes will be sent separately. * tag 'omap-for-v5.3/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Add support for module specific reset quirks bus: ti-sysc: Detect uarts also on omap34xx bus: ti-sysc: Do rstctrl reset handling in two phases bus: ti-sysc: Add support for disabling module without legacy mode bus: ti-sysc: Set ENAWAKEUP if available bus: ti-sysc: Handle swsup idle mode quirks bus: ti-sysc: Handle clockactivity for enable and disable bus: ti-sysc: Enable interconnect target module autoidle bit on enable bus: ti-sysc: Allow QUIRK_LEGACY_IDLE even if legacy_mode is not set bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits bus: ti-sysc: Support 16-bit writes too bus: ti-sysc: Add support for missing clockdomain handling ARM: dts: dra71x: Disable usb4_tm target module ARM: dts: dra71x: Disable rtc target module ARM: dts: dra76x: Disable usb4_tm target module ARM: dts: dra76x: Disable rtc target module ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values ARM: dts: am57xx-idk: Remove support for voltage switching for SD card bus: ti-sysc: Handle devices with no control registers ARM: dts: Configure osc clock for d_can on am335x Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes for 5.3, please pull the following: - Markus provides a set of updates to the DPFE driver to support a new revision of the API to the firmware (version 3) and provides minor fixes about how the MR4-8 words are read for LPDDR4 devices - Florian removes a print of a virtual address in brcmstb_gisb.c * tag 'arm-soc/for-5.3/drivers' of https://github.com/Broadcom/stblinux: memory: brcmstb: dpfe: introduce DPFE API v3 memory: brcmstb: dpfe: prepare for API-dependent sysfs attributes memory: brcmstb: dpfe: prepare support for multiple API versions memory: brcmstb: dpfe: wait for DCPU to be ready memory: brcmstb: dpfe: report firmware loading error memory: brcmstb: dpfe: remove unused code and fix formatting bus: brcmstb_gisb: Remove print of base address memory: brcmstb: dpfe: use byte 3 of registers MR4-MR8 memory: brcmstb: dpfe: optimize generic_show() memory: brcmstb: dpfe: use msleep() over udelay() Signed-off-by: Olof Johansson <olof@lixom.net>
NXP/FSL SoC driver updates for v5.3 DPAA2 Console driver - Add driver to export two char devices to dump logs for MC and AIOP DPAA2 DPIO driver - Add support for memory backed QBMan portals - Increase the timeout period to prevent false error - Add APIs to retrieve QBMan portal probing status DPAA Qman driver - Only make liodn fixup on powerpc SoCs with PAMU iommu * tag 'soc-fsl-next-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: qbman_portals: add APIs to retrieve the probing status soc: fsl: qman: fixup liodns only on ppc targets soc: fsl: dpio: Add support for memory backed QBMan portals bus: mc-bus: Add support for mapping shareable portals soc: fsl: dpio: Increase timeout for QBMan Management Commands soc: fsl: add DPAA2 console support Documentation: DT: Add entry for DPAA2 console soc: fsl: guts: Add definition for LX2160A Signed-off-by: Olof Johansson <olof@lixom.net>
Fixes for omap variants for dra7 mmc voltage and boot issues This series contains dra7 mmc voltage fixes, and fixes to the recent changes to probe devices with device tree data insteas of legacy platform data: - Two fixes for dra7 mmc that needs 1.8V mode disabled as in case of a reset, the bootrom will try to access the mmc card at 3.3V potentially damaging the card - Two regression fixes for am335x d_can. We must allow devices with no control registers for ti-sysc interconnect target module driver for at least d_can, and we remove the incorrect control registers for d_can. And we must configure the osc clock for d_can as otherwise register access may fail depending on the bootloader version - Four regression fixes for dra7 variant dts files to tag rtc and usb4 as disabled for dra71x and dra76x. These SoC variants do not have these devices, and got accidentally enabled when the L4 interconnect got defined in the dra7-l4.dtsi for the dra7 SoC family * tag 'omap-for-v5.2/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra71x: Disable usb4_tm target module ARM: dts: dra71x: Disable rtc target module ARM: dts: dra76x: Disable usb4_tm target module ARM: dts: dra76x: Disable rtc target module ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values ARM: dts: am57xx-idk: Remove support for voltage switching for SD card bus: ti-sysc: Handle devices with no control registers ARM: dts: Configure osc clock for d_can on am335x Signed-off-by: Olof Johansson <olof@lixom.net>
Some older interconnect target modules need module internal clock toggling quirks to reset properly. We've been doing this in the platform code earlier, but need to be able to it directly in the ti-sysc driver when we no longer rely on on the platform code. Let's add reset handling for 1-wire, i2c and watchdog. Later on we can add more modules like msdi and dss as they get tested. For dra7 pcie, we should be able to just use the rstctrl reset driver when available. Signed-off-by: Tony Lindgren <tony@atomide.com>
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>