linux.git/drivers/bus, branch v5.13 Linux kernel source tree Merge tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 2021-06-12T19:13:55+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-06-12T19:13:55+00:00 1dfa2e77bbd5053d11f8f3f8987b4503badafb09 Pull char/misc driver fixes from Greg KH: "Here are some small misc driver fixes for 5.13-rc6 that fix some reported problems: - Tiny phy driver fixes for reported issues - rtsx regression for when the device suspended - mhi driver fix for a use-after-free All of these have been in linux-next for a few days with no reported issues" * tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG bus: mhi: pci-generic: Fix hibernation bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove() bus: mhi: pci_generic: T99W175: update channel name from AT to DUN phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource() phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable phy: ti: Fix an error code in wiz_probe() phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init() phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe() phy: usb: Fix misuse of IS_ENABLED 
Pull char/misc driver fixes from Greg KH:
 "Here are some small misc driver fixes for 5.13-rc6 that fix some
  reported problems:

   - Tiny phy driver fixes for reported issues

   - rtsx regression for when the device suspended

   - mhi driver fix for a use-after-free

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG
  bus: mhi: pci-generic: Fix hibernation
  bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()
  bus: mhi: pci_generic: T99W175: update channel name from AT to DUN
  phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()
  phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable
  phy: ti: Fix an error code in wiz_probe()
  phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()
  phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()
  phy: usb: Fix misuse of IS_ENABLED
bus: mhi: pci-generic: Fix hibernation 2021-06-09T17:04:04+00:00 Loic Poulain loic.poulain@linaro.org 2021-06-06T15:37:41+00:00 5f0c2ee1fe8de700dd0d1cdc63e1a7338e2d3a3d This patch fixes crash after resuming from hibernation. The issue occurs when mhi stack is builtin and so part of the 'restore-kernel', causing the device to be resumed from 'restored kernel' with a no more valid context (memory mappings etc...) and leading to spurious crashes. This patch fixes the issue by implementing proper freeze/restore callbacks. Link: https://lore.kernel.org/r/1622571445-4505-1-git-send-email-loic.poulain@linaro.org Reported-by: Shujun Wang <wsj20369@163.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch fixes crash after resuming from hibernation. The issue
occurs when mhi stack is builtin and so part of the 'restore-kernel',
causing the device to be resumed from 'restored kernel' with a no
more valid context (memory mappings etc...) and leading to spurious
crashes.

This patch fixes the issue by implementing proper freeze/restore
callbacks.

Link: https://lore.kernel.org/r/1622571445-4505-1-git-send-email-loic.poulain@linaro.org
Reported-by: Shujun Wang <wsj20369@163.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove() 2021-06-09T17:04:00+00:00 Wei Yongjun weiyongjun1@huawei.com 2021-06-06T15:37:40+00:00 0b67808ade8893a1b3608ddd74fac7854786c919 This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Link: https://lore.kernel.org/r/20210413160318.2003699-1-weiyongjun1@huawei.com Fixes: 8562d4fe34a3 ("mhi: pci_generic: Add health-check") Cc: stable <stable@vger.kernel.org> Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Hemant kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This driver's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Link: https://lore.kernel.org/r/20210413160318.2003699-1-weiyongjun1@huawei.com
Fixes: 8562d4fe34a3 ("mhi: pci_generic: Add health-check")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Hemant kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bus: mhi: pci_generic: T99W175: update channel name from AT to DUN 2021-06-09T16:58:52+00:00 Jarvis Jiang jarvis.w.jiang@gmail.com 2021-06-06T15:37:39+00:00 c7711c22c6ebc07a19a3dbdf87b05d9aa78f5390 According to MHI v1.1 specification, change the channel name of T99W175 from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33, so that the channels can be bound to the Qcom WWAN control driver, and device node such as /dev/wwan0p3DUN will be generated, which is very useful for debugging modem Link: https://lore.kernel.org/r/20210429014226.21017-1-jarvis.w.jiang@gmail.com [mani: changed the dev node to /dev/wwan0p3DUN] Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
According to MHI v1.1 specification, change the channel name of T99W175
from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33,
so that the channels can be bound to the Qcom WWAN control driver, and
device node such as /dev/wwan0p3DUN will be generated, which is very useful
for debugging modem

Link: https://lore.kernel.org/r/20210429014226.21017-1-jarvis.w.jiang@gmail.com
[mani: changed the dev node to /dev/wwan0p3DUN]
Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210606153741.20725-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act 2021-05-25T06:08:23+00:00 Tony Lindgren tony@atomide.com 2021-05-25T06:08:23+00:00 c8692ad416dcc420ce1b403596a425c8f4c2720b Looks like the swsup_sidle_act quirk handling is unreliable for serial ports. The serial ports just eventually stop idling until woken up and re-idled again. As the serial port not idling blocks any deeper SoC idle states, it's adds an annoying random flakeyness for power management. Let's just switch to swsup_sidle quirk instead like we already do for omap3 uarts. This means we manually idle the port instead of trying to use the hardware autoidle features when not in use. For more details on why the serial ports have been using swsup_idle_act, see commit 66dde54e978a ("ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes"). It seems that the swsup_idle_act quirk handling is not enough though, and for example the TI Android kernel changed to using swsup_sidle with commit 77c34c84e1e0 ("OMAP4: HWMOD: UART1: disable smart-idle."). Fixes: b4a9a7a38917 ("bus: ti-sysc: Handle swsup idle mode quirks") Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Ivan Jelincic <parazyd@dyne.org> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
Looks like the swsup_sidle_act quirk handling is unreliable for serial
ports. The serial ports just eventually stop idling until woken up and
re-idled again. As the serial port not idling blocks any deeper SoC idle
states, it's adds an annoying random flakeyness for power management.

Let's just switch to swsup_sidle quirk instead like we already do for
omap3 uarts. This means we manually idle the port instead of trying to
use the hardware autoidle features when not in use.

For more details on why the serial ports have been using swsup_idle_act,
see commit 66dde54e978a ("ARM: OMAP2+: hwmod-data: UART IP needs software
control to manage sidle modes"). It seems that the swsup_idle_act quirk
handling is not enough though, and for example the TI Android kernel
changed to using swsup_sidle with commit 77c34c84e1e0 ("OMAP4: HWMOD:
UART1: disable smart-idle.").

Fixes: b4a9a7a38917 ("bus: ti-sysc: Handle swsup idle mode quirks")
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Ivan Jelincic <parazyd@dyne.org>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
bus: ti-sysc: Fix am335x resume hang for usb otg module 2021-05-18T07:11:06+00:00 Tony Lindgren tony@atomide.com 2021-05-18T06:47:23+00:00 4d7b324e231366ea772ab10df46be31273ca39af On am335x, suspend and resume only works once, and the system hangs if suspend is attempted again. However, turns out suspend and resume works fine multiple times if the USB OTG driver for musb controller is loaded. The issue is caused my the interconnect target module losing context during suspend, and it needs a restore on resume to be reconfigure again as debugged earlier by Dave Gerlach <d-gerlach@ti.com>. There are also other modules that need a restore on resume, like gpmc as noted by Dave. So let's add a common way to restore an interconnect target module based on a quirk flag. For now, let's enable the quirk for am335x otg only to fix the suspend and resume issue. As gpmc is not causing hangs based on tests with BeagleBone, let's patch gpmc separately. For gpmc, we also need a hardware reset done before restore according to Dave. To reinit the modules, we decouple system suspend from PM runtime. We replace calls to pm_runtime_force_suspend() and pm_runtime_force_resume() with direct calls to internal functions and rely on the driver internal state. There no point trying to handle complex system suspend and resume quirks via PM runtime. This is issue should have already been noticed with commit 1819ef2e2d12 ("bus: ti-sysc: Use swsup quirks also for am335x musb") when quirk handling was added for am335x otg for swsup. But the issue went unnoticed as having musb driver loaded hides the issue, and suspend and resume works once without the driver loaded. Fixes: 1819ef2e2d12 ("bus: ti-sysc: Use swsup quirks also for am335x musb") Suggested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
On am335x, suspend and resume only works once, and the system hangs if
suspend is attempted again. However, turns out suspend and resume works
fine multiple times if the USB OTG driver for musb controller is loaded.

The issue is caused my the interconnect target module losing context
during suspend, and it needs a restore on resume to be reconfigure again
as debugged earlier by Dave Gerlach <d-gerlach@ti.com>.

There are also other modules that need a restore on resume, like gpmc as
noted by Dave. So let's add a common way to restore an interconnect
target module based on a quirk flag. For now, let's enable the quirk for
am335x otg only to fix the suspend and resume issue.

As gpmc is not causing hangs based on tests with BeagleBone, let's patch
gpmc separately. For gpmc, we also need a hardware reset done before
restore according to Dave.

To reinit the modules, we decouple system suspend from PM runtime. We
replace calls to pm_runtime_force_suspend() and pm_runtime_force_resume()
with direct calls to internal functions and rely on the driver internal
state. There no point trying to handle complex system suspend and resume
quirks via PM runtime.

This is issue should have already been noticed with commit 1819ef2e2d12
("bus: ti-sysc: Use swsup quirks also for am335x musb") when quirk
handling was added for am335x otg for swsup. But the issue went unnoticed
as having musb driver loaded hides the issue, and suspend and resume works
once without the driver loaded.

Fixes: 1819ef2e2d12 ("bus: ti-sysc: Use swsup quirks also for am335x musb")
Suggested-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Merge branch 'fixes-rc1' into fixes 2021-05-18T06:45:08+00:00 Tony Lindgren tony@atomide.com 2021-05-18T06:45:08+00:00 85ebe5aeef9b0bf4c91ff91652b32f9c54f71d34 






bus: ti-sysc: Fix missing quirk flags for sata
2021-05-07T11:21:32+00:00

Tony Lindgren
tony@atomide.com

2021-05-07T09:09:03+00:00

db8e712e06874e37a1fdb9bb011618811fc96dbd

Naresh Kamboju <naresh.kamboju@linaro.org> reported that Beaglebone-X15
does not detect sata drives any longer after dra7 was flipped to boot with
device tree data only. Turns out we are now missing the sata related quirk
flags in ti-sysc that we used to have earlier.

Fixes: 98feab31ac49 ("ARM: OMAP2+: Drop legacy platform data for dra7 sata")
Fixes: 21206c8f2cb5 ("ARM: OMAP2+: Drop legacy platform data for omap5 sata")
Link: https://lore.kernel.org/regressions/CA+G9fYtTN6ug3eBAW3wMcDeESUo+ebj7L5HBe5_fj4uqDExFQg@mail.gmail.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>





Naresh Kamboju <naresh.kamboju@linaro.org> reported that Beaglebone-X15
does not detect sata drives any longer after dra7 was flipped to boot with
device tree data only. Turns out we are now missing the sata related quirk
flags in ti-sysc that we used to have earlier.

Fixes: 98feab31ac49 ("ARM: OMAP2+: Drop legacy platform data for dra7 sata")
Fixes: 21206c8f2cb5 ("ARM: OMAP2+: Drop legacy platform data for omap5 sata")
Link: https://lore.kernel.org/regressions/CA+G9fYtTN6ug3eBAW3wMcDeESUo+ebj7L5HBe5_fj4uqDExFQg@mail.gmail.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>







Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
2021-04-26T19:11:52+00:00

Linus Torvalds
torvalds@linux-foundation.org

2021-04-26T19:11:52+00:00

37f00ab4a003f371f81e0eae76cf372f06dec780

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  TEE/OP-TEE:
   - Add tracepoints around calls to secure world

  Memory controller drivers:
   - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
   - Add debug statistics to Tegra20 memory controller
   - Update Tegra bindings and convert to dtschema

  ARM SCMI Firmware:
   - Support for modular SCMI protocols and vendor specific extensions
   - New SCMI IIO driver
   - Per-cpu DVFS

  The other driver changes are all from the platform maintainers
  directly and reflect the drivers that don't fit into any other
  subsystem as well as treewide changes for a particular platform.

  SoCFPGA:
   - Various cleanups contributed by Krzysztof Kozlowski

  Mediatek:
   - add MT8183 support to mutex driver
   - MMSYS: use per SoC array to describe the possible routing
   - add MMSYS support for MT8183 and MT8167
   - add support for PMIC wrapper with integrated arbiter
   - add support for MT8192/MT6873

  Tegra:
   - Bug fixes to PMC and clock drivers

  NXP/i.MX:
   - Update SCU power domain driver to keep console domain power on.
   - Add missing ADC1 power domain to SCU power domain driver.
   - Update comments for single global power domain in SCU power domain
     driver.
   - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.

  NXP/FSL SoC driver updates for v5.13
   - Add ACPI support for RCPM driver
   - Use generic io{read,write} for QE drivers after performance
     optimized for PowerPC
   - Fix QBMAN probe to cleanup HW states correctly for kexec
   - Various cleanup and style fix for QBMAN/QE/GUTS drivers

  OMAP:
   - Preparation to use devicetree for genpd
   - ti-sysc needs iorange check improved when the interconnect target
     module has no control registers listed
   - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
     avoid issues with missing resources and unnecessary deferred probe
   - ti-sysc debug option can now detect more devices
   - ti-sysc now warns if an old incomplete devicetree data is found as
     we now rely on it being complete for am3 and 4
   - soc init code needs to check for prcm and prm nodes for omap4/5 and
     dra7
   - omap-prm driver needs to enable autoidle retention support for
     omap4
   - omap5 clocks are missing gpmc and ocmc clock registers
   - pci-dra7xx now needs to use builtin_platform_driver instead of
     using builtin_platform_driver_probe for deferred probe to work

  Raspberry Pi:
   - Fix-up all RPi firmware drivers so as for unbind to happen in an
     orderly fashion
   - Support for RPi's PoE hat PWM bus

  Qualcomm
   - Improved detection for SCM calling conventions
   - Support for OEM specific wifi firmware path
   - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"

* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: aspeed: fix a ternary sign expansion bug
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
  memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
  clk: socfpga: fix iomem pointer cast on 64-bit
  soc: aspeed: Adapt to new LPC device tree layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  ARM: dts: Remove LPC BMC and Host partitions
  dt-bindings: aspeed-lpc: Remove LPC partitioning
  soc: fsl: enable acpi support in RCPM driver
  soc: qcom: mdt_loader: Detect truncated read of segments
  soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
  soc: qcom: pdr: Fix error return code in pdr_register_listener
  firmware: qcom_scm: Fix kernel-doc function names to match
  firmware: qcom_scm: Suppress sysfs bind attributes
  firmware: qcom_scm: Workaround lack of "is available" call on SC7180
  firmware: qcom_scm: Reduce locking section for __get_convention()
  firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  ...





Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  TEE/OP-TEE:
   - Add tracepoints around calls to secure world

  Memory controller drivers:
   - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
   - Add debug statistics to Tegra20 memory controller
   - Update Tegra bindings and convert to dtschema

  ARM SCMI Firmware:
   - Support for modular SCMI protocols and vendor specific extensions
   - New SCMI IIO driver
   - Per-cpu DVFS

  The other driver changes are all from the platform maintainers
  directly and reflect the drivers that don't fit into any other
  subsystem as well as treewide changes for a particular platform.

  SoCFPGA:
   - Various cleanups contributed by Krzysztof Kozlowski

  Mediatek:
   - add MT8183 support to mutex driver
   - MMSYS: use per SoC array to describe the possible routing
   - add MMSYS support for MT8183 and MT8167
   - add support for PMIC wrapper with integrated arbiter
   - add support for MT8192/MT6873

  Tegra:
   - Bug fixes to PMC and clock drivers

  NXP/i.MX:
   - Update SCU power domain driver to keep console domain power on.
   - Add missing ADC1 power domain to SCU power domain driver.
   - Update comments for single global power domain in SCU power domain
     driver.
   - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.

  NXP/FSL SoC driver updates for v5.13
   - Add ACPI support for RCPM driver
   - Use generic io{read,write} for QE drivers after performance
     optimized for PowerPC
   - Fix QBMAN probe to cleanup HW states correctly for kexec
   - Various cleanup and style fix for QBMAN/QE/GUTS drivers

  OMAP:
   - Preparation to use devicetree for genpd
   - ti-sysc needs iorange check improved when the interconnect target
     module has no control registers listed
   - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
     avoid issues with missing resources and unnecessary deferred probe
   - ti-sysc debug option can now detect more devices
   - ti-sysc now warns if an old incomplete devicetree data is found as
     we now rely on it being complete for am3 and 4
   - soc init code needs to check for prcm and prm nodes for omap4/5 and
     dra7
   - omap-prm driver needs to enable autoidle retention support for
     omap4
   - omap5 clocks are missing gpmc and ocmc clock registers
   - pci-dra7xx now needs to use builtin_platform_driver instead of
     using builtin_platform_driver_probe for deferred probe to work

  Raspberry Pi:
   - Fix-up all RPi firmware drivers so as for unbind to happen in an
     orderly fashion
   - Support for RPi's PoE hat PWM bus

  Qualcomm
   - Improved detection for SCM calling conventions
   - Support for OEM specific wifi firmware path
   - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"

* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: aspeed: fix a ternary sign expansion bug
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
  memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
  clk: socfpga: fix iomem pointer cast on 64-bit
  soc: aspeed: Adapt to new LPC device tree layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  ARM: dts: Remove LPC BMC and Host partitions
  dt-bindings: aspeed-lpc: Remove LPC partitioning
  soc: fsl: enable acpi support in RCPM driver
  soc: qcom: mdt_loader: Detect truncated read of segments
  soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
  soc: qcom: pdr: Fix error return code in pdr_register_listener
  firmware: qcom_scm: Fix kernel-doc function names to match
  firmware: qcom_scm: Suppress sysfs bind attributes
  firmware: qcom_scm: Workaround lack of "is available" call on SC7180
  firmware: qcom_scm: Reduce locking section for __get_convention()
  firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  ...







Merge tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
2021-04-26T18:48:26+00:00

Linus Torvalds
torvalds@linux-foundation.org

2021-04-26T18:48:26+00:00

01d7136894410a71932096e0fb9f1d301b6ccf07

Pull ARM SoC updates from Arnd Bergmann:
 "Almost all SoC code changes this time are for the TI OMAP platform,
  which continues its decade-long quest to move from describing a
  complex SoC in code to device tree.

  Aside from this, the Uniphier platform has a new maintainer and some
  platforms have minor bugfixes and cleanups that were not urgent enough
  for v5.12"

* tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status
  mailmap: Update email address for Nicolas Saenz
  MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail
  ARM: exynos: correct kernel doc in platsmp
  ARM: hisi: use the correct HiSilicon copyright
  ARM: ux500: make ux500_cpu_die static
  ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950
  ARM: OMAP1: fix incorrect kernel-doc comment syntax in file
  ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file
  ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock
  ARM: at91: pm: Move prototypes to mutually included header
  ARM: OMAP2+: use true and false for bool variable
  ARM: OMAP2+: add missing call to of_node_put()
  ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  ARM: imx: Kconfig: Fix typo in help
  ARM: mach-imx: Fix a spelling in the file pm-imx5.c
  bus: ti-sysc: Warn about old dtb for dra7 and omap4/5
  ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5
  ARM: OMAP2+: Drop legacy platform data for omap5 hwmod
  ARM: OMAP2+: Drop legacy platform data for omap5 l3
  ...





Pull ARM SoC updates from Arnd Bergmann:
 "Almost all SoC code changes this time are for the TI OMAP platform,
  which continues its decade-long quest to move from describing a
  complex SoC in code to device tree.

  Aside from this, the Uniphier platform has a new maintainer and some
  platforms have minor bugfixes and cleanups that were not urgent enough
  for v5.12"

* tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status
  mailmap: Update email address for Nicolas Saenz
  MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail
  ARM: exynos: correct kernel doc in platsmp
  ARM: hisi: use the correct HiSilicon copyright
  ARM: ux500: make ux500_cpu_die static
  ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950
  ARM: OMAP1: fix incorrect kernel-doc comment syntax in file
  ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file
  ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock
  ARM: at91: pm: Move prototypes to mutually included header
  ARM: OMAP2+: use true and false for bool variable
  ARM: OMAP2+: add missing call to of_node_put()
  ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  ARM: imx: Kconfig: Fix typo in help
  ARM: mach-imx: Fix a spelling in the file pm-imx5.c
  bus: ti-sysc: Warn about old dtb for dra7 and omap4/5
  ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5
  ARM: OMAP2+: Drop legacy platform data for omap5 hwmod
  ARM: OMAP2+: Drop legacy platform data for omap5 l3
  ...