<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/bus/ti-sysc.c, branch v6.6</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up</title>
<updated>2023-09-13T07:24:53+00:00</updated>
<author>
<name>Tony Lindgren</name>
<email>tony@atomide.com</email>
</author>
<published>2023-09-07T05:53:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=e5deb8f76e64d94ccef715e75ebafffd0c312d80'/>
<id>e5deb8f76e64d94ccef715e75ebafffd0c312d80</id>
<content type='text'>
The uarts should be tagged with SYSC_QUIRK_SWSUP_SIDLE instead of
SYSC_QUIRK_SWSUP_SIDLE_ACT. The difference is that SYSC_QUIRK_SWSUP_SIDLE
is used to force idle target modules rather than block idle during usage.

The SYSC_QUIRK_SWSUP_SIDLE_ACT should disable autoidle and wake-up when
a target module is active, and configure autoidle and wake-up when a
target module is inactive. We are missing configuring the target module
on sysc_disable_module(), and missing toggling of the wake-up bit.

Let's fix the issue to allow uart wake-up to work.

Fixes: fb685f1c190e ("bus: ti-sysc: Handle swsup idle mode quirks")
Tested-by: Dhruva Gole &lt;d-gole@ti.com&gt;
Tested-by: Kevin Hilman &lt;khilman@baylibre.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The uarts should be tagged with SYSC_QUIRK_SWSUP_SIDLE instead of
SYSC_QUIRK_SWSUP_SIDLE_ACT. The difference is that SYSC_QUIRK_SWSUP_SIDLE
is used to force idle target modules rather than block idle during usage.

The SYSC_QUIRK_SWSUP_SIDLE_ACT should disable autoidle and wake-up when
a target module is active, and configure autoidle and wake-up when a
target module is inactive. We are missing configuring the target module
on sysc_disable_module(), and missing toggling of the wake-up bit.

Let's fix the issue to allow uart wake-up to work.

Fixes: fb685f1c190e ("bus: ti-sysc: Handle swsup idle mode quirks")
Tested-by: Dhruva Gole &lt;d-gole@ti.com&gt;
Tested-by: Kevin Hilman &lt;khilman@baylibre.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bus: ti-sysc: Fix missing AM35xx SoC matching</title>
<updated>2023-09-11T03:04:17+00:00</updated>
<author>
<name>Adam Ford</name>
<email>aford173@gmail.com</email>
</author>
<published>2023-09-06T23:34:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=11729caa520950e17cd81bc43ffc477c46cf791e'/>
<id>11729caa520950e17cd81bc43ffc477c46cf791e</id>
<content type='text'>
Commit feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")
created a list of SoC types searching for strings based on names
and wildcards which associates the SoC to different families.

The OMAP34xx and OMAP35xx are treated as SOC_3430 while
OMAP36xx and OMAP37xx are treated as SOC_3630, but the AM35xx
isn't listed.

The AM35xx is mostly an OMAP3430, and a later commit a12315d6d270
("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") looks
for the SOC type and behaves in a certain way if it's SOC_3430.

This caused a regression on the AM3517 causing it to return two
errors:

 ti-sysc: probe of 48318000.target-module failed with error -16
 ti-sysc: probe of 49032000.target-module failed with error -16

Fix this by treating the creating SOC_AM35 and inserting it between
the SOC_3430 and SOC_3630.  If it is treaed the same way as the
SOC_3430 when checking the status of sysc_check_active_timer,
the error conditions will disappear.

Fixes: a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific")
Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")
Signed-off-by: Adam Ford &lt;aford173@gmail.com&gt;
Message-ID: &lt;20230906233442.270835-1-aford173@gmail.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")
created a list of SoC types searching for strings based on names
and wildcards which associates the SoC to different families.

The OMAP34xx and OMAP35xx are treated as SOC_3430 while
OMAP36xx and OMAP37xx are treated as SOC_3630, but the AM35xx
isn't listed.

The AM35xx is mostly an OMAP3430, and a later commit a12315d6d270
("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") looks
for the SOC type and behaves in a certain way if it's SOC_3430.

This caused a regression on the AM3517 causing it to return two
errors:

 ti-sysc: probe of 48318000.target-module failed with error -16
 ti-sysc: probe of 49032000.target-module failed with error -16

Fix this by treating the creating SOC_AM35 and inserting it between
the SOC_3430 and SOC_3630.  If it is treaed the same way as the
SOC_3430 when checking the status of sysc_check_active_timer,
the error conditions will disappear.

Fixes: a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific")
Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")
Signed-off-by: Adam Ford &lt;aford173@gmail.com&gt;
Message-ID: &lt;20230906233442.270835-1-aford173@gmail.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset()</title>
<updated>2023-09-11T03:04:17+00:00</updated>
<author>
<name>Julien Panis</name>
<email>jpanis@baylibre.com</email>
</author>
<published>2023-08-21T14:24:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d929b2b7464f95ec01e47f560b1e687482ba8929'/>
<id>d929b2b7464f95ec01e47f560b1e687482ba8929</id>
<content type='text'>
The am335x-evm started producing boot errors because of subtle timing
changes:

Unhandled fault: external abort on non-linefetch (0x1008) at 0xf03c1010
...
sysc_reset from sysc_probe+0xf60/0x1514
sysc_probe from platform_probe+0x5c/0xbc
...

The fix consists in using the appropriate sleep function in sysc reset.
For flexible sleeping, fsleep is recommended. Here, sysc delay parameter
can take any value in [0 - 255] us range. As a result, fsleep() should
be used, calling udelay() for a sysc delay lower than 10 us.

Signed-off-by: Julien Panis &lt;jpanis@baylibre.com&gt;
Fixes: e709ed70d122 ("bus: ti-sysc: Fix missing reset delay handling")
Message-ID: &lt;20230821-fix-ti-sysc-reset-v1-1-5a0a5d8fae55@baylibre.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The am335x-evm started producing boot errors because of subtle timing
changes:

Unhandled fault: external abort on non-linefetch (0x1008) at 0xf03c1010
...
sysc_reset from sysc_probe+0xf60/0x1514
sysc_probe from platform_probe+0x5c/0xbc
...

The fix consists in using the appropriate sleep function in sysc reset.
For flexible sleeping, fsleep is recommended. Here, sysc delay parameter
can take any value in [0 - 255] us range. As a result, fsleep() should
be used, calling udelay() for a sysc delay lower than 10 us.

Signed-off-by: Julien Panis &lt;jpanis@baylibre.com&gt;
Fixes: e709ed70d122 ("bus: ti-sysc: Fix missing reset delay handling")
Message-ID: &lt;20230821-fix-ti-sysc-reset-v1-1-5a0a5d8fae55@baylibre.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc</title>
<updated>2023-08-30T23:42:21+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2023-08-30T23:42:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=1544df9ab4003f9f6b9894d48a235cd1859e7db3'/>
<id>1544df9ab4003f9f6b9894d48a235cd1859e7db3</id>
<content type='text'>
Pull ARM SoC driver updates from Arnd Bergmann:
 "The main change this time was the introduction of the drivers/genpd
  subsystem that gets split out from drivers/soc to keep common
  functionality together.

  The SCMI driver subsystem gets an update to version 3.2 of the
  specification. There are also updates to memory, reset and other
  firmware drivers.

  On the soc driver side, the updates are mostly cleanups across a
  number of Arm platforms. On driver for loongarch adds power management
  for DT based systems, another driver is for HiSilicon's Arm server
  chips with their HCCS system health interface.

  The remaining updates for the most part add support for additional
  hardware in existing drivers or contain minor cleanups. Most of these
  are for the Qualcomm Snapdragon platform"

* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
  bus: fsl-mc: Use common ranges functions
  soc: kunpeng_hccs: fix some sparse warnings about incorrect type
  soc: loongson2_pm: add power management support
  soc: dt-bindings: add loongson-2 pm
  soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width &gt; 1
  genpd: rockchip: Add PD_VO entry for rv1126
  bus: ti-sysc: Fix cast to enum warning
  soc: kunpeng_hccs: add MAILBOX dependency
  MAINTAINERS: remove OXNAS entry
  dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
  irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
  soc: qcom: aoss: Tidy up qmp_send() callers
  soc: qcom: aoss: Format string in qmp_send()
  soc: qcom: aoss: Move length requirements from caller
  soc: kunpeng_hccs: fix size_t format string
  soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
  dt-bindings: firmware: qcom: scm: Updating VMID list
  firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
  firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
  firmware: imx: scu-irq: add imx_scu_irq_get_status
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ARM SoC driver updates from Arnd Bergmann:
 "The main change this time was the introduction of the drivers/genpd
  subsystem that gets split out from drivers/soc to keep common
  functionality together.

  The SCMI driver subsystem gets an update to version 3.2 of the
  specification. There are also updates to memory, reset and other
  firmware drivers.

  On the soc driver side, the updates are mostly cleanups across a
  number of Arm platforms. On driver for loongarch adds power management
  for DT based systems, another driver is for HiSilicon's Arm server
  chips with their HCCS system health interface.

  The remaining updates for the most part add support for additional
  hardware in existing drivers or contain minor cleanups. Most of these
  are for the Qualcomm Snapdragon platform"

* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
  bus: fsl-mc: Use common ranges functions
  soc: kunpeng_hccs: fix some sparse warnings about incorrect type
  soc: loongson2_pm: add power management support
  soc: dt-bindings: add loongson-2 pm
  soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width &gt; 1
  genpd: rockchip: Add PD_VO entry for rv1126
  bus: ti-sysc: Fix cast to enum warning
  soc: kunpeng_hccs: add MAILBOX dependency
  MAINTAINERS: remove OXNAS entry
  dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
  irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
  soc: qcom: aoss: Tidy up qmp_send() callers
  soc: qcom: aoss: Format string in qmp_send()
  soc: qcom: aoss: Move length requirements from caller
  soc: kunpeng_hccs: fix size_t format string
  soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
  dt-bindings: firmware: qcom: scm: Updating VMID list
  firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
  firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
  firmware: imx: scu-irq: add imx_scu_irq_get_status
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>bus: ti-sysc: Fix cast to enum warning</title>
<updated>2023-08-15T05:52:01+00:00</updated>
<author>
<name>Tony Lindgren</name>
<email>tony@atomide.com</email>
</author>
<published>2023-08-15T05:49:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=de44bf2f7683347f75690ef6cf61a1d5ba8f0891'/>
<id>de44bf2f7683347f75690ef6cf61a1d5ba8f0891</id>
<content type='text'>
Fix warning for "cast to smaller integer type 'enum sysc_soc' from 'const
void *'".

Cc: Nishanth Menon &lt;nm@ti.com&gt;
Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Closes: https://lore.kernel.org/oe-kbuild-all/202308150723.ziuGCdM3-lkp@intel.com/
Fixes: e1e1e9bb9d94 ("bus: ti-sysc: Fix build warning for 64-bit build")
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Fix warning for "cast to smaller integer type 'enum sysc_soc' from 'const
void *'".

Cc: Nishanth Menon &lt;nm@ti.com&gt;
Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Closes: https://lore.kernel.org/oe-kbuild-all/202308150723.ziuGCdM3-lkp@intel.com/
Fixes: e1e1e9bb9d94 ("bus: ti-sysc: Fix build warning for 64-bit build")
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bus: ti-sysc: Fix a build warning with W=1 for sysconfig</title>
<updated>2023-08-10T06:21:45+00:00</updated>
<author>
<name>Tony Lindgren</name>
<email>tony@atomide.com</email>
</author>
<published>2023-08-09T09:53:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=40a4f49cd32dbc641c706215c1fa6c5bd051428c'/>
<id>40a4f49cd32dbc641c706215c1fa6c5bd051428c</id>
<content type='text'>
Dhruva reported a build warning with W=1 for "Function parameter or member
'sysconfig' not described in 'sysc'". Let's document sysconfig to fix this.

Reported-by: Dhruva Gole &lt;d-gole@ti.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Dhruva reported a build warning with W=1 for "Function parameter or member
'sysconfig' not described in 'sysc'". Let's document sysconfig to fix this.

Reported-by: Dhruva Gole &lt;d-gole@ti.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bus: ti-sysc: Configure uart quirks for k3 SoC</title>
<updated>2023-08-10T06:21:45+00:00</updated>
<author>
<name>Tony Lindgren</name>
<email>tony@atomide.com</email>
</author>
<published>2023-08-04T10:38:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=03a711d3cb83692733f865312f49e665c49de6de'/>
<id>03a711d3cb83692733f865312f49e665c49de6de</id>
<content type='text'>
Enable the uart quirks similar to the earlier SoCs. Let's assume we are
likely going to need a k3 specific quirk mask separate from the earlier
SoCs, so let's not start changing the revision register mask at this point.

Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the
need for pm_runtime_irq_safe() from 8250_omap driver.

Reviewed-by: Nishanth Menon &lt;nm@ti.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Enable the uart quirks similar to the earlier SoCs. Let's assume we are
likely going to need a k3 specific quirk mask separate from the earlier
SoCs, so let's not start changing the revision register mask at this point.

Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the
need for pm_runtime_irq_safe() from 8250_omap driver.

Reviewed-by: Nishanth Menon &lt;nm@ti.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bus: ti-sysc: Fix build warning for 64-bit build</title>
<updated>2023-08-10T06:21:45+00:00</updated>
<author>
<name>Tony Lindgren</name>
<email>tony@atomide.com</email>
</author>
<published>2023-08-04T10:38:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=e1e1e9bb9d943ec690670a609a5f660ca10eaf85'/>
<id>e1e1e9bb9d943ec690670a609a5f660ca10eaf85</id>
<content type='text'>
Fix "warning: cast from pointer to integer of different size" on 64-bit
builds.

Note that this is a cosmetic fix at this point as the driver is not yet
used for 64-bit systems.

Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")
Reviewed-by: Dhruva Gole &lt;d-gole@ti.com&gt;
Reviewed-by: Nishanth Menon &lt;nm@ti.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Fix "warning: cast from pointer to integer of different size" on 64-bit
builds.

Note that this is a cosmetic fix at this point as the driver is not yet
used for 64-bit systems.

Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")
Reviewed-by: Dhruva Gole &lt;d-gole@ti.com&gt;
Reviewed-by: Nishanth Menon &lt;nm@ti.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bus: ti-sysc: Flush posted write on enable before reset</title>
<updated>2023-06-14T08:03:06+00:00</updated>
<author>
<name>Tony Lindgren</name>
<email>tony@atomide.com</email>
</author>
<published>2023-06-14T07:18:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=34539b442b3bc7d5bf10164750302b60b91f18a7'/>
<id>34539b442b3bc7d5bf10164750302b60b91f18a7</id>
<content type='text'>
The am335x devices started producing boot errors for resetting musb module
in because of subtle timing changes:

Unhandled fault: external abort on non-linefetch (0x1008)
...
sysc_poll_reset_sysconfig from sysc_reset+0x109/0x12
sysc_reset from sysc_probe+0xa99/0xeb0
...

The fix is to flush posted write after enable before reset during
probe. Note that some devices also need to specify the delay after enable
with ti,sysc-delay-us, but this is not needed for musb on am335x based on
my tests.

Reported-by: kernelci.org bot &lt;bot@kernelci.org&gt;
Closes: https://storage.kernelci.org/next/master/next-20230614/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/lab-cip/baseline-beaglebone-black.html
Fixes: 596e7955692b ("bus: ti-sysc: Add support for software reset")
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The am335x devices started producing boot errors for resetting musb module
in because of subtle timing changes:

Unhandled fault: external abort on non-linefetch (0x1008)
...
sysc_poll_reset_sysconfig from sysc_reset+0x109/0x12
sysc_reset from sysc_probe+0xa99/0xeb0
...

The fix is to flush posted write after enable before reset during
probe. Note that some devices also need to specify the delay after enable
with ti,sysc-delay-us, but this is not needed for musb on am335x based on
my tests.

Reported-by: kernelci.org bot &lt;bot@kernelci.org&gt;
Closes: https://storage.kernelci.org/next/master/next-20230614/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/lab-cip/baseline-beaglebone-black.html
Fixes: 596e7955692b ("bus: ti-sysc: Add support for software reset")
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bus: ti-sysc: Fix dispc quirk masking bool variables</title>
<updated>2023-05-17T07:17:01+00:00</updated>
<author>
<name>Tony Lindgren</name>
<email>tony@atomide.com</email>
</author>
<published>2023-05-17T07:04:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=f620596fa347170852da499e778a5736d79a4b79'/>
<id>f620596fa347170852da499e778a5736d79a4b79</id>
<content type='text'>
Fix warning drivers/bus/ti-sysc.c:1806 sysc_quirk_dispc()
warn: masking a bool.

While at it let's add a comment for what were doing to make
the code a bit easier to follow.

Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk")
Reported-by: Dan Carpenter &lt;dan.carpenter@linaro.org&gt;
Closes: https://lore.kernel.org/linux-omap/a8ec8a68-9c2c-4076-bf47-09fccce7659f@kili.mountain/
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Fix warning drivers/bus/ti-sysc.c:1806 sysc_quirk_dispc()
warn: masking a bool.

While at it let's add a comment for what were doing to make
the code a bit easier to follow.

Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk")
Reported-by: Dan Carpenter &lt;dan.carpenter@linaro.org&gt;
Closes: https://lore.kernel.org/linux-omap/a8ec8a68-9c2c-4076-bf47-09fccce7659f@kili.mountain/
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
