The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.

Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:

  struct property *prop;
  const __be32 *p;
  u32 val;

  of_property_for_each_u32(np, "xyz", prop, p, val) { ... }

to this:

  u32 val;

  of_property_for_each_u32(np, "xyz", val) { ... }

However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.

Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:

 - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
 - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
   checks had to be replicated in a different way, making code more verbose
   and somewhat uglier, but I refrained from a full rework to keep as much
   of the original code untouched having no hardware to test my changes

All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.

Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

There are no more users that need the legacy idle quirk so let's drop
the legacy idle quirk handling. This simplifies the PM code to just
sysc_pm_ops with unified handling for all the interconnect targets.

Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

With the smartreflex driver no longer relying on the use of
pm_runtime_irq_safe(), we can finally drop the related legacy quirk
handling.

Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

With the 8250_omap and omap-serial drivers no longer relying on the use
of pm_runtime_irq_safe(), we can finally drop the related legacy quirk
handling for uarts.

Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The ti-sysc driver is missing coprights and description, let's add
those.

Signed-off-by: Tony Lindgren <tony@atomide.com>

We are wrongly checking SYSC_QUIRK_NO_RESET_ON_INIT flag in sysc_reset(),
it can be called also after init from sysc_reinit_module(). Let's move
the check to the init code in preparation for adding reset control support
in the future.

Note that this change is not needed as a fix as there are no known issues
caused by it currently.

Signed-off-by: Tony Lindgren <tony@atomide.com>

Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
sysc_device_type variable to be a constant structure as well, placing it
into read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Message-ID: <20240219-device_cleanup-ti-sysc-v1-1-13b53177d0a5@marliere.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Pull SoC driver updates from Arnd Bergmann:
 "A new drivers/cache/ subsystem is added to contain drivers for
  abstracting cache flush methods on riscv and potentially others, as
  this is needed for handling non-coherent DMA but several SoCs require
  nonstandard hardware methods for it.

  op-tee gains support for asynchronous notification with FF-A, as well
  as support for a system thread for executing in secure world.

  The tee, reset, bus, memory and scmi subsystems have a couple of minor
  updates.

  Platform specific soc driver changes include:

   - Samsung Exynos gains driver support for Google GS101 (Tensor G1)
     across multiple subsystems

   - Qualcomm Snapdragon gains support for SM8650 and X1E along with
     added features for some other SoCs

   - Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
     MT8195, and driver support for MT8188 along with some code
     refactoring.

   - Microchip Polarfire FPGA support for "Auto Update" of the FPGA
     bitstream

   - Apple M1 mailbox driver is rewritten into a SoC driver

   - minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
     hisilicon"

* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
  memory: ti-emif-pm: Convert to platform remove callback returning void
  memory: ti-aemif: Convert to platform remove callback returning void
  memory: tegra210-emc: Convert to platform remove callback returning void
  memory: tegra186-emc: Convert to platform remove callback returning void
  memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
  memory: exynos5422-dmc: Convert to platform remove callback returning void
  memory: renesas-rpc-if: Convert to platform remove callback returning void
  memory: omap-gpmc: Convert to platform remove callback returning void
  memory: mtk-smi: Convert to platform remove callback returning void
  memory: jz4780-nemc: Convert to platform remove callback returning void
  memory: fsl_ifc: Convert to platform remove callback returning void
  memory: fsl-corenet-cf: Convert to platform remove callback returning void
  memory: emif: Convert to platform remove callback returning void
  memory: brcmstb_memc: Convert to platform remove callback returning void
  memory: brcmstb_dpfe: Convert to platform remove callback returning void
  soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
  firmware: qcom: qseecom: fix memory leaks in error paths
  dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
  soc: qcom: llcc: Fix typo in kernel-doc
  dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
  ...

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231109202830.4124591-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Commit 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before
reset") caused a regression reproducable on omap4 duovero where the ISS
target module can produce interconnect errors on boot. Turns out the
registers are not accessible until after a delay for devices needing
a ti,sysc-delay-us value.

Let's fix this by flushing the posted write only after the reset delay.
We do flushing also for ti,sysc-delay-us using devices as that should
trigger an interconnect error if the delay is not properly configured.

Let's also add some comments while at it.

Fixes: 34539b442b3b ("bus: ti-sysc: Flush posted write on enable before reset")
Cc: stable@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>