linux.git/drivers/bluetooth, branch v6.9-rc4 Linux kernel source tree Bluetooth: qca: fix device-address endianness 2024-03-29T13:48:37+00:00 Johan Hovold johan+linaro@kernel.org 2024-03-20T07:55:54+00:00 77f45cca8bc55d00520a192f5a7715133591c83e The WCN6855 firmware on the Lenovo ThinkPad X13s expects the Bluetooth device address in big-endian order when setting it using the EDL_WRITE_BD_ADDR_OPCODE command. Presumably, this is the case for all non-ROME devices which all use the EDL_WRITE_BD_ADDR_OPCODE command for this (unlike the ROME devices which use a different command and expect the address in little-endian order). Reverse the little-endian address before setting it to make sure that the address can be configured using tools like btmgmt or using the 'local-bd-address' devicetree property. Note that this can potentially break systems with boot firmware which has started relying on the broken behaviour and is incorrectly passing the address via devicetree in big-endian order. The only device affected by this should be the WCN3991 used in some Chromebooks. As ChromeOS updates the kernel and devicetree in lockstep, the new 'qcom,local-bd-address-broken' property can be used to determine if the firmware is buggy so that the underlying driver bug can be fixed without breaking backwards compatibility. Set the HCI_QUIRK_BDADDR_PROPERTY_BROKEN quirk for such platforms so that the address is reversed when parsing the address property. Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address") Cc: stable@vger.kernel.org # 5.1 Cc: Balakrishna Godavarthi <quic_bgodavar@quicinc.com> Cc: Matthias Kaehlcke <mka@chromium.org> Tested-by: Nikita Travkin <nikita@trvn.ru> # sc7180 Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
The WCN6855 firmware on the Lenovo ThinkPad X13s expects the Bluetooth
device address in big-endian order when setting it using the
EDL_WRITE_BD_ADDR_OPCODE command.

Presumably, this is the case for all non-ROME devices which all use the
EDL_WRITE_BD_ADDR_OPCODE command for this (unlike the ROME devices which
use a different command and expect the address in little-endian order).

Reverse the little-endian address before setting it to make sure that
the address can be configured using tools like btmgmt or using the
'local-bd-address' devicetree property.

Note that this can potentially break systems with boot firmware which
has started relying on the broken behaviour and is incorrectly passing
the address via devicetree in big-endian order.

The only device affected by this should be the WCN3991 used in some
Chromebooks. As ChromeOS updates the kernel and devicetree in lockstep,
the new 'qcom,local-bd-address-broken' property can be used to determine
if the firmware is buggy so that the underlying driver bug can be fixed
without breaking backwards compatibility.

Set the HCI_QUIRK_BDADDR_PROPERTY_BROKEN quirk for such platforms so
that the address is reversed when parsing the address property.

Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address")
Cc: stable@vger.kernel.org      # 5.1
Cc: Balakrishna Godavarthi <quic_bgodavar@quicinc.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Nikita Travkin <nikita@trvn.ru> # sc7180
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Revert "Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT" 2024-03-29T13:48:37+00:00 Johan Hovold johan+linaro@kernel.org 2024-03-14T08:44:12+00:00 4790a73ace86f3d165bbedba898e0758e6e1b82d This reverts commit 7dcd3e014aa7faeeaf4047190b22d8a19a0db696. Qualcomm Bluetooth controllers like WCN6855 do not have persistent storage for the Bluetooth address and must therefore start as unconfigured to allow the user to set a valid address unless one has been provided by the boot firmware in the devicetree. A recent change snuck into v6.8-rc7 and incorrectly started marking the default (non-unique) address as valid. This specifically also breaks the Bluetooth setup for some user of the Lenovo ThinkPad X13s. Note that this is the second time Qualcomm breaks the driver this way and that this was fixed last year by commit 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk"), which also has some further details. Fixes: 7dcd3e014aa7 ("Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT") Cc: stable@vger.kernel.org # 6.8 Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reported-by: Clayton Craft <clayton@craftyguy.net> Tested-by: Clayton Craft <clayton@craftyguy.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
This reverts commit 7dcd3e014aa7faeeaf4047190b22d8a19a0db696.

Qualcomm Bluetooth controllers like WCN6855 do not have persistent
storage for the Bluetooth address and must therefore start as
unconfigured to allow the user to set a valid address unless one has
been provided by the boot firmware in the devicetree.

A recent change snuck into v6.8-rc7 and incorrectly started marking the
default (non-unique) address as valid. This specifically also breaks the
Bluetooth setup for some user of the Lenovo ThinkPad X13s.

Note that this is the second time Qualcomm breaks the driver this way
and that this was fixed last year by commit 6945795bc81a ("Bluetooth:
fix use-bdaddr-property quirk"), which also has some further details.

Fixes: 7dcd3e014aa7 ("Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT")
Cc: stable@vger.kernel.org      # 6.8
Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Clayton Craft <clayton@craftyguy.net>
Tested-by: Clayton Craft <clayton@craftyguy.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2024-03-21T19:44:10+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-21T19:44:10+00:00 3bcb0bf65c2b8d67dbe7509da8d1461ee4445db7 Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY/Serial driver updates and cleanups for 6.9-rc1. Included in here are: - more tty cleanups from Jiri - loads of 8250 driver cleanups from Andy - max310x driver updates - samsung serial driver updates - uart_prepare_sysrq_char() updates for many drivers - platform driver remove callback void cleanups - stm32 driver updates - other small tty/serial driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) dt-bindings: serial: stm32: add power-domains property serial: 8250_dw: Replace ACPI device check by a quirk serial: Lock console when calling into driver before registration serial: 8250_uniphier: Switch to use uart_read_port_properties() serial: 8250_tegra: Switch to use uart_read_port_properties() serial: 8250_pxa: Switch to use uart_read_port_properties() serial: 8250_omap: Switch to use uart_read_port_properties() serial: 8250_of: Switch to use uart_read_port_properties() serial: 8250_lpc18xx: Switch to use uart_read_port_properties() serial: 8250_ingenic: Switch to use uart_read_port_properties() serial: 8250_dw: Switch to use uart_read_port_properties() serial: 8250_bcm7271: Switch to use uart_read_port_properties() serial: 8250_bcm2835aux: Switch to use uart_read_port_properties() serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties() serial: port: Introduce a common helper to read properties serial: core: Add UPIO_UNKNOWN constant for unknown port type serial: core: Move struct uart_port::quirks closer to possible values serial: sh-sci: Call sci_serial_{in,out}() directly serial: core: only stop transmit when HW fifo is empty serial: pch: Use uart_prepare_sysrq_char(). ... 
Pull tty / serial driver updates from Greg KH:
 "Here is the big set of TTY/Serial driver updates and cleanups for
  6.9-rc1. Included in here are:

   - more tty cleanups from Jiri

   - loads of 8250 driver cleanups from Andy

   - max310x driver updates

   - samsung serial driver updates

   - uart_prepare_sysrq_char() updates for many drivers

   - platform driver remove callback void cleanups

   - stm32 driver updates

   - other small tty/serial driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  dt-bindings: serial: stm32: add power-domains property
  serial: 8250_dw: Replace ACPI device check by a quirk
  serial: Lock console when calling into driver before registration
  serial: 8250_uniphier: Switch to use uart_read_port_properties()
  serial: 8250_tegra: Switch to use uart_read_port_properties()
  serial: 8250_pxa: Switch to use uart_read_port_properties()
  serial: 8250_omap: Switch to use uart_read_port_properties()
  serial: 8250_of: Switch to use uart_read_port_properties()
  serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
  serial: 8250_ingenic: Switch to use uart_read_port_properties()
  serial: 8250_dw: Switch to use uart_read_port_properties()
  serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
  serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
  serial: port: Introduce a common helper to read properties
  serial: core: Add UPIO_UNKNOWN constant for unknown port type
  serial: core: Move struct uart_port::quirks closer to possible values
  serial: sh-sci: Call sci_serial_{in,out}() directly
  serial: core: only stop transmit when HW fifo is empty
  serial: pch: Use uart_prepare_sysrq_char().
  ...
Bluetooth: Add new quirk for broken read key length on ATS2851 2024-03-06T22:27:14+00:00 Vinicius Peixoto nukelet64@gmail.com 2024-02-27T01:43:26+00:00 48201a3b3f398be6a01f78a14b18bd5d31c47458 The ATS2851 controller erroneously reports support for the "Read Encryption Key Length" HCI command. This makes it unable to connect to any devices, since this command is issued by the kernel during the connection process in response to an "Encryption Change" HCI event. Add a new quirk (HCI_QUIRK_BROKEN_ENC_KEY_SIZE) to hint that the command is unsupported, preventing it from interrupting the connection process. This is the error log from btmon before this patch: > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 2048 Address: ... Encryption: Enabled with E0 (0x01) < HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2 Handle: 2048 Address: ... > HCI Event: Command Status (0x0f) plen 4 Read Encryption Key Size (0x05|0x0008) ncmd 1 Status: Unknown HCI Command (0x01) Signed-off-by: Vinicius Peixoto <nukelet64@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
The ATS2851 controller erroneously reports support for the "Read
Encryption Key Length" HCI command. This makes it unable to connect
to any devices, since this command is issued by the kernel during the
connection process in response to an "Encryption Change" HCI event.

Add a new quirk (HCI_QUIRK_BROKEN_ENC_KEY_SIZE) to hint that the command
is unsupported, preventing it from interrupting the connection process.

This is the error log from btmon before this patch:

> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 2048 Address: ...
        Encryption: Enabled with E0 (0x01)
< HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2
        Handle: 2048 Address: ...
> HCI Event: Command Status (0x0f) plen 4
      Read Encryption Key Size (0x05|0x0008) ncmd 1
        Status: Unknown HCI Command (0x01)

Signed-off-by: Vinicius Peixoto <nukelet64@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btusb: Add support Mediatek MT7920 2024-03-06T22:27:11+00:00 Peter Tsao peter.tsao@mediatek.com 2024-03-04T14:48:44+00:00 1cb63d80fff6c4f501469e28a0eb6379639e0711 This patch is added support Mediatek MT7920 The firmware location of MT7920 will set to /lib/firmware/mediatek/ The information in /sys/kernel/debug/usb/devices about MT7920U Bluetooth device is listed as the below T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=7920 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Peter Tsao <peter.tsao@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
This patch is added support Mediatek MT7920
The firmware location of MT7920 will set to
/lib/firmware/mediatek/

The information in /sys/kernel/debug/usb/devices about MT7920U
Bluetooth device is listed as the below

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 12 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0e8d ProdID=7920 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Peter Tsao <peter.tsao@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btmtk: Add MODULE_FIRMWARE() for MT7922 2024-03-06T22:27:11+00:00 Takashi Iwai tiwai@suse.de 2024-02-27T10:29:14+00:00 3e465a07cdf444140f16bc57025c23fcafdde997 Since dracut refers to the module info for defining the required firmware files and btmtk driver doesn't provide the firmware info for MT7922, the generate initrd misses the firmware, resulting in the broken Bluetooth. This patch simply adds the MODULE_FIRMWARE() for the missing entry for covering that. Link: https://bugzilla.suse.com/show_bug.cgi?id=1214133 Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
Since dracut refers to the module info for defining the required
firmware files and btmtk driver doesn't provide the firmware info for
MT7922, the generate initrd misses the firmware, resulting in the
broken Bluetooth.

This patch simply adds the MODULE_FIRMWARE() for the missing entry
for covering that.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1214133
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btnxpuart: Fix btnxpuart_close 2024-03-06T22:27:10+00:00 Marcel Ziswiler marcel.ziswiler@toradex.com 2024-03-04T18:14:21+00:00 664130c0b0309b360bc5bdd40a30604a9387bde8 Fix scheduling while atomic BUG in btnxpuart_close(), properly purge the transmit queue and free the receive skb. [ 10.973809] BUG: scheduling while atomic: kworker/u9:0/80/0x00000002 ... [ 10.980740] CPU: 3 PID: 80 Comm: kworker/u9:0 Not tainted 6.8.0-rc7-0.0.0-devel-00005-g61fdfceacf09 #1 [ 10.980751] Hardware name: Toradex Verdin AM62 WB on Dahlia Board (DT) [ 10.980760] Workqueue: hci0 hci_power_off [bluetooth] [ 10.981169] Call trace: ... [ 10.981363] uart_update_mctrl+0x58/0x78 [ 10.981373] uart_dtr_rts+0x104/0x114 [ 10.981381] tty_port_shutdown+0xd4/0xdc [ 10.981396] tty_port_close+0x40/0xbc [ 10.981407] uart_close+0x34/0x9c [ 10.981414] ttyport_close+0x50/0x94 [ 10.981430] serdev_device_close+0x40/0x50 [ 10.981442] btnxpuart_close+0x24/0x98 [btnxpuart] [ 10.981469] hci_dev_close_sync+0x2d8/0x718 [bluetooth] [ 10.981728] hci_dev_do_close+0x2c/0x70 [bluetooth] [ 10.981862] hci_power_off+0x20/0x64 [bluetooth] Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Cc: stable@vger.kernel.org Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
Fix scheduling while atomic BUG in btnxpuart_close(), properly
purge the transmit queue and free the receive skb.

[   10.973809] BUG: scheduling while atomic: kworker/u9:0/80/0x00000002
...
[   10.980740] CPU: 3 PID: 80 Comm: kworker/u9:0 Not tainted 6.8.0-rc7-0.0.0-devel-00005-g61fdfceacf09 #1
[   10.980751] Hardware name: Toradex Verdin AM62 WB on Dahlia Board (DT)
[   10.980760] Workqueue: hci0 hci_power_off [bluetooth]
[   10.981169] Call trace:
...
[   10.981363]  uart_update_mctrl+0x58/0x78
[   10.981373]  uart_dtr_rts+0x104/0x114
[   10.981381]  tty_port_shutdown+0xd4/0xdc
[   10.981396]  tty_port_close+0x40/0xbc
[   10.981407]  uart_close+0x34/0x9c
[   10.981414]  ttyport_close+0x50/0x94
[   10.981430]  serdev_device_close+0x40/0x50
[   10.981442]  btnxpuart_close+0x24/0x98 [btnxpuart]
[   10.981469]  hci_dev_close_sync+0x2d8/0x718 [bluetooth]
[   10.981728]  hci_dev_do_close+0x2c/0x70 [bluetooth]
[   10.981862]  hci_power_off+0x20/0x64 [bluetooth]

Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btusb: Fix memory leak 2024-03-06T22:26:23+00:00 Luiz Augusto von Dentz luiz.von.dentz@intel.com 2024-02-28T16:17:24+00:00 79f4127a502c5905f04da1f20a7bbe07103fb77c This checks if CONFIG_DEV_COREDUMP is enabled before attempting to clone the skb and also make sure btmtk_process_coredump frees the skb passed following the same logic. Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
This checks if CONFIG_DEV_COREDUMP is enabled before attempting to clone
the skb and also make sure btmtk_process_coredump frees the skb passed
following the same logic.

Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: btrtl: fix out of bounds memory access 2024-03-06T22:26:21+00:00 Andrey Skvortsov andrej.skvortzov@gmail.com 2024-02-23T21:37:04+00:00 de4e88ec58c4202efd1f02eebb4939bbf6945358 The problem is detected by KASAN. btrtl driver uses private hci data to store 'struct btrealtek_data'. If btrtl driver is used with btusb, then memory for private hci data is allocated in btusb. But no private data is allocated after hci_dev, when btrtl is used with hci_h5. This commit adds memory allocation for hci_h5 case. ================================================================== BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl] Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76 Hardware name: Pine64 PinePhone (1.2) (DT) Workqueue: hci0 hci_power_on [bluetooth] Call trace: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5d8 kasan_report+0x90/0xd0 __asan_store8+0x9c/0xc0 [btrtl] h5_btrtl_setup+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] hci_dev_do_open+0x34/0x90 [bluetooth] hci_power_on+0xc4/0x3c8 [bluetooth] process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Allocated by task 53: kasan_save_stack+0x3c/0x68 kasan_save_track+0x20/0x40 kasan_save_alloc_info+0x68/0x78 __kasan_kmalloc+0xd4/0xd8 __kmalloc+0x1b4/0x3b0 hci_alloc_dev_priv+0x28/0xa58 [bluetooth] hci_uart_register_device+0x118/0x4f8 [hci_uart] h5_serdev_probe+0xf4/0x178 [hci_uart] serdev_drv_probe+0x54/0xa0 really_probe+0x254/0x588 __driver_probe_device+0xc4/0x210 driver_probe_device+0x64/0x160 __driver_attach_async_helper+0x88/0x158 async_run_entry_fn+0xd0/0x388 process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Last potentially related work creation: kasan_save_stack+0x3c/0x68 __kasan_record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14/0x20 __queue_work+0x33c/0x960 queue_work_on+0x98/0xc0 hci_recv_frame+0xc8/0x1e8 [bluetooth] h5_complete_rx_pkt+0x2c8/0x800 [hci_uart] h5_rx_payload+0x98/0xb8 [hci_uart] h5_recv+0x158/0x3d8 [hci_uart] hci_uart_receive_buf+0xa0/0xe8 [hci_uart] ttyport_receive_buf+0xac/0x178 flush_to_ldisc+0x130/0x2c8 process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Second to last potentially related work creation: kasan_save_stack+0x3c/0x68 __kasan_record_aux_stack+0xb0/0x150 kasan_record_aux_stack_noalloc+0x14/0x20 __queue_work+0x788/0x960 queue_work_on+0x98/0xc0 __hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth] __hci_cmd_sync+0x24/0x38 [bluetooth] btrtl_initialize+0x760/0x958 [btrtl] h5_btrtl_setup+0xd0/0x2f8 [hci_uart] h5_setup+0x50/0x80 [hci_uart] hci_uart_setup+0xd4/0x260 [hci_uart] hci_dev_open_sync+0x1cc/0xf68 [bluetooth] hci_dev_do_open+0x34/0x90 [bluetooth] hci_power_on+0xc4/0x3c8 [bluetooth] process_one_work+0x328/0x6f0 worker_thread+0x410/0x778 kthread+0x168/0x178 ret_from_fork+0x10/0x20 ================================================================== Fixes: 5b355944b190 ("Bluetooth: btrtl: Add btrealtek data struct") Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support") Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
The problem is detected by KASAN.
btrtl driver uses private hci data to store 'struct btrealtek_data'.
If btrtl driver is used with btusb, then memory for private hci data
is allocated in btusb. But no private data is allocated after hci_dev,
when btrtl is used with hci_h5.

This commit adds memory allocation for hci_h5 case.

 ==================================================================
 BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl]
 Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76

 Hardware name: Pine64 PinePhone (1.2) (DT)
 Workqueue: hci0 hci_power_on [bluetooth]
 Call trace:
  dump_backtrace+0x9c/0x128
  show_stack+0x20/0x38
  dump_stack_lvl+0x48/0x60
  print_report+0xf8/0x5d8
  kasan_report+0x90/0xd0
  __asan_store8+0x9c/0xc0
  	 [btrtl]
  h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
  h5_setup+0x50/0x80 [hci_uart]
  hci_uart_setup+0xd4/0x260 [hci_uart]
  hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
  hci_dev_do_open+0x34/0x90 [bluetooth]
  hci_power_on+0xc4/0x3c8 [bluetooth]
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 Allocated by task 53:
  kasan_save_stack+0x3c/0x68
  kasan_save_track+0x20/0x40
  kasan_save_alloc_info+0x68/0x78
  __kasan_kmalloc+0xd4/0xd8
  __kmalloc+0x1b4/0x3b0
  hci_alloc_dev_priv+0x28/0xa58 [bluetooth]
  hci_uart_register_device+0x118/0x4f8 [hci_uart]
  h5_serdev_probe+0xf4/0x178 [hci_uart]
  serdev_drv_probe+0x54/0xa0
  really_probe+0x254/0x588
  __driver_probe_device+0xc4/0x210
  driver_probe_device+0x64/0x160
  __driver_attach_async_helper+0x88/0x158
  async_run_entry_fn+0xd0/0x388
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 Last potentially related work creation:
  kasan_save_stack+0x3c/0x68
  __kasan_record_aux_stack+0xb0/0x150
  kasan_record_aux_stack_noalloc+0x14/0x20
  __queue_work+0x33c/0x960
  queue_work_on+0x98/0xc0
  hci_recv_frame+0xc8/0x1e8 [bluetooth]
  h5_complete_rx_pkt+0x2c8/0x800 [hci_uart]
  h5_rx_payload+0x98/0xb8 [hci_uart]
  h5_recv+0x158/0x3d8 [hci_uart]
  hci_uart_receive_buf+0xa0/0xe8 [hci_uart]
  ttyport_receive_buf+0xac/0x178
  flush_to_ldisc+0x130/0x2c8
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 Second to last potentially related work creation:
  kasan_save_stack+0x3c/0x68
  __kasan_record_aux_stack+0xb0/0x150
  kasan_record_aux_stack_noalloc+0x14/0x20
  __queue_work+0x788/0x960
  queue_work_on+0x98/0xc0
  __hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth]
  __hci_cmd_sync+0x24/0x38 [bluetooth]
  btrtl_initialize+0x760/0x958 [btrtl]
  h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
  h5_setup+0x50/0x80 [hci_uart]
  hci_uart_setup+0xd4/0x260 [hci_uart]
  hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
  hci_dev_do_open+0x34/0x90 [bluetooth]
  hci_power_on+0xc4/0x3c8 [bluetooth]
  process_one_work+0x328/0x6f0
  worker_thread+0x410/0x778
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20
 ==================================================================

Fixes: 5b355944b190 ("Bluetooth: btrtl: Add btrealtek data struct")
Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support")
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_h5: Add ability to allocate memory for private data 2024-03-06T22:26:21+00:00 Andrey Skvortsov andrej.skvortzov@gmail.com 2024-02-23T21:37:03+00:00 7a6d793e9ca8bc0c1d2f0aa0a02ec380d1124c74 In some cases uart-base drivers may need to use priv data. For example, to store information needed for devcoredump. Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support") Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> 
In some cases uart-base drivers may need to use priv data. For
example, to store information needed for devcoredump.

Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support")
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>