This patch introduces support for Marvell Bluetooth controller over UART (8897 for now). In order to send the final firmware at full speed, a helper firmware is firstly sent. Firmware download is driven by the controller which sends request firmware packets (including expected size). This driver is a global rework of the one proposed by Amitkumar Karwar <akarwar@marvell.com>. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Will be used by hci_nokia extra protocol. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
HCI_UART_PROTO_SET flag is set before hci_uart_set_proto call. If we receive data from tty layer during this procedure, proto pointer may not be assigned yet, leading to null pointer dereference in rx method hci_uart_tty_receive. This patch fixes this issue by introducing HCI_UART_PROTO_READY flag in order to avoid any proto operation before proto opening and assignment. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This driver implements support for iBT2.1 Bluetooth controller embedded in the AG620 communication combo. The controller needs to be configured with bddata and can be patched with a binary patch file (pbn). These operations are performed in manufacturing mode. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Provide an early indication about the manufacturer information so that it can be forwarded into monitor channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
rx_lock spinlock is only used in hci_uart_tty_receive() which is the receive_buf ldisc callback. hci_uart_tty_receive() is protected from re-entrance by its only caller (flush_to_ldisc() in drivers/tty/tty_buffer.c) which held a mutex (buf->lock) for this section. This lock allows "safe use of the line discipline's receive_buf() method by excluding the buffer work and any pending flush from using the flip buffer." (comments from tty_buffer_lock_exclusive() in drivers/tty/tty_buffer.c) So, no need to double protect this resource with rx_lock. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
QCA61x4 chips have supported sleep feature using In-Band-Sleep commands to enable sleep feature based on H4 protocol. After sending patch/nvm configuration is done, IBS mode will be up and running Signed-off-by: Ben Young Tae Kim <ytkim@qca.qualcomm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The Intel Lightning Peak devices do not come with Bluetooth firmware loaded and thus require a full download of the operational Bluetooth firmware when the device is attached via the Bluetooth line discipline. Lightning Peak devices start with a bootloader mode that only accepts a very limited set of HCI commands. The supported commands are enough to identify the hardware and select the right firmware to load. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Added the ability to flow control the UART, improved the UART baud rate setting, transferred the speeds into line discipline from the protocol and introduced the tty init function. Signed-off-by: Ilya Faenson <ifaenson@broadcom.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Add initial and operational speeds. Change to operational speed as soon as possible. If controller set_baudrate() fails, continue at initial speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>