linux.git/drivers/bluetooth/ath3k.c, branch v5.3

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Richard Fontana 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman

Bluetooth: ath3k: add more information to error message

2018-09-28T17:27:50+00:00

When there is an error in either ath3k_load_firmware() or
ath3k_load_fwfile(), the inlined function ath3k_log_failed_loading() is
called receiving the error returned and both the block size requested to
load and the size actually loaded. These values are printed in an error
message using the macro BT_ERR.

This patch changes that function in order to print the variable "count"
as well, to show more information when a failing firmware loading
operation happens. The calls to the older function were changed to the
new one.

This event is being monitored in a laptop with an adapter which
identifies itself as 0cf3:0036, where sometimes there are errors in the
firmware loading process.

Signed-off-by: Luiz Carlos Ramos 
Signed-off-by: Marcel Holtmann

Bluetooth: ath3k: fix checkpatch warning

2018-02-07T08:46:09+00:00

This patch fixed warning:
 WARNING: Prefer using '"%s...", __func__' to using 'ath3k_disconnect', this function's name, in a string
 #568: FILE: drivers/bluetooth/ath3k.c:568:
 +	BT_DBG("ath3k_disconnect intf %p", intf);

Signed-off-by: Maxim Zhukov 
Signed-off-by: Marcel Holtmann

Bluetooth: ath3k: Fix warning: quoted string split across lines

2018-02-07T08:46:09+00:00

This patch avoided the warning:
WARNING: quoted string split across lines
 #355: FILE: drivers/bluetooth/ath3k.c:355:
 +			BT_ERR("Error in firmware loading err = %d,"
 +				"len = %d, size = %d", err, len, size);

This patch fix this issue.

Signed-off-by: Maxim Zhukov 
Signed-off-by: Marcel Holtmann

Bluetooth: ath3k: remove blank line after if

2018-02-07T08:46:09+00:00

Removed blank line after if.

Signed-off-by: Maxim Zhukov 
Signed-off-by: Marcel Holtmann

Bluetooth: ath3k: do not init variables

2018-02-07T08:46:09+00:00

Do not need to initialize variables, because further on the code they
fall into the snprintf.

Signed-off-by: Maxim Zhukov 
Signed-off-by: Marcel Holtmann

Bluetooth: ath3k: replace hardcode numbers with define

2018-02-07T08:46:09+00:00

Replaced the numbers with a readable define.

Signed-off-by: Maxim Zhukov 
Signed-off-by: Marcel Holtmann

Bluetooth: Style fix - align block comments

2017-07-22T06:39:39+00:00

Fixed alignment of all block comments.
Found using checkpatch

Signed-off-by: Derek Robson 
Signed-off-by: Marcel Holtmann

Bluetooth: Add another AR3012 04ca:3018 device

2017-02-16T16:35:23+00:00

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3018 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: Dmitry Tunin 
Signed-off-by: Marcel Holtmann 
Cc: stable@vger.kernel.org

Bluetooth: Add support of 13d3:3490 AR3012 device

2016-07-11T22:36:39+00:00

T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=05 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3490 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

BugLink: https://bugs.launchpad.net/bugs/1600623

Signed-off-by: Dmitry Tunin 
Signed-off-by: Marcel Holtmann 
Cc: stable@vger.kernel.org