linux.git/drivers/block, branch v6.3-rc5

loop: LOOP_CONFIGURE: send uevents for partitions

2023-03-27T19:27:06+00:00

LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to
combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall.  When
using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for
each partition found on the loop device after the second ioctl(), but
when using LOOP_CONFIGURE, no such uevent was being sent.

In the old setup, uevents are disabled for LOOP_SET_FD, but not for
LOOP_SET_STATUS64.  This makes sense, as it prevents uevents being
sent for a partially configured device during LOOP_SET_FD - they're
only sent at the end of LOOP_SET_STATUS64.  But for LOOP_CONFIGURE,
uevents were disabled for the entire operation, so that final
notification was never issued.  To fix this, reduce the critical
section to exclude the loop_reread_partitions() call, which causes
the uevents to be issued, to after uevents are re-enabled, matching
the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination.

I noticed this because Busybox's losetup program recently changed from
using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke
my setup, for which I want a notification from the kernel any time a
new partition becomes available.

Signed-off-by: Alyssa Ross 
[hch: reduced the critical section]
Signed-off-by: Christoph Hellwig 
Fixes: 3448914e8cc5 ("loop: Add LOOP_CONFIGURE ioctl")
Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.de
Signed-off-by: Jens Axboe

block/io_uring: pass in issue_flags for uring_cmd task_work handling

2023-03-21T02:01:25+00:00

io_uring_cmd_done() currently assumes that the uring_lock is held
when invoked, and while it generally is, this is not guaranteed.
Pass in the issue_flags associated with it, so that we have
IO_URING_F_UNLOCKED available to be able to lock the CQ ring
appropriately when completing events.

Cc: stable@vger.kernel.org
Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd")
Signed-off-by: Jens Axboe

block: ublk_drv: mark device as LIVE before adding disk

2023-03-18T14:32:46+00:00

IO can be started before add_disk() returns, such as reading parititon table,
then the monitor work should work for making forward progress.

So mark device as LIVE before adding disk, meantime change to
DEAD if add_disk() fails.

Fixed: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Ziyang Zhang 
Signed-off-by: Ming Lei 
Link: https://lore.kernel.org/r/20230318141231.55562-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe

block: sunvdc: add check for mdesc_grab() returning NULL

2023-03-15T14:48:58+00:00

In vdc_port_probe(), we should check the return value of mdesc_grab() as
it may return NULL, which can cause potential NPD bug.

Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.")
Signed-off-by: Liang He 
Link: https://lore.kernel.org/r/20230315062032.1741692-1-windhl@126.com
[axboe: style cleanup]
Signed-off-by: Jens Axboe

block: null_blk: cleanup null_queue_rq()

2023-03-15T12:50:24+00:00

Use a local struct request pointer variable to avoid having to
dereference struct blk_mq_queue_data multiple times. While at it, also
fix the function argument indentation and remove a useless "else" after
a return.

Signed-off-by: Damien Le Moal 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Pankaj Raghav 
Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe

block: null_blk: Fix handling of fake timeout request

2023-03-15T12:50:23+00:00

When injecting a fake timeout into the null_blk driver using
fail_io_timeout, the request timeout handler does not execute
blk_mq_complete_request(), so the complete callback is never executed
for a timedout request.

The null_blk driver also has a driver-specific fake timeout mechanism
which does not have this problem. Fix the problem with fail_io_timeout
by using the same meachanism as null_blk internal timeout feature, using
the fake_timeout field of null_blk commands.

Reported-by: Akinobu Mita 
Fixes: de3510e52b0a ("null_blk: fix command timeout completion handling")
Signed-off-by: Damien Le Moal 
Reviewed-by: Johannes Thumshirn 
Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe

loop: Fix use-after-free issues

2023-03-15T01:20:48+00:00

do_req_filebacked() calls blk_mq_complete_request() synchronously or
asynchronously when using asynchronous I/O unless memory allocation fails.
Hence, modify loop_handle_cmd() such that it does not dereference 'cmd' nor
'rq' after do_req_filebacked() finished unless we are sure that the request
has not yet been completed. This patch fixes the following kernel crash:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000054
Call trace:
 css_put.42938+0x1c/0x1ac
 loop_process_work+0xc8c/0xfd4
 loop_rootcg_workfn+0x24/0x34
 process_one_work+0x244/0x558
 worker_thread+0x400/0x8fc
 kthread+0x16c/0x1e0
 ret_from_fork+0x10/0x20

Cc: Christoph Hellwig 
Cc: Ming Lei 
Cc: Jan Kara 
Cc: Johannes Weiner 
Cc: Dan Schatzberg 
Fixes: c74d40e8b5e2 ("loop: charge i/o to mem and blk cg")
Fixes: bc07c10a3603 ("block: loop: support DIO & AIO")
Signed-off-by: Bart Van Assche 
Reviewed-by: Ming Lei 
Link: https://lore.kernel.org/r/20230314182155.80625-1-bvanassche@acm.org
Signed-off-by: Jens Axboe

Merge tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux

2023-03-03T18:21:39+00:00

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
      - Don't access released socket during error recovery (Akinobu
        Mita)
      - Bring back auto-removal of deleted namespaces during sequential
        scan (Christoph Hellwig)
      - Fix an error code in nvme_auth_process_dhchap_challenge (Dan
        Carpenter)
      - Show well known discovery name (Daniel Wagner)
      - Add a missing endianess conversion in effects masking (Keith
        Busch)

 - Fix for a regression introduced in blk-rq-qos during init in this
   merge window (Breno)

 - Reorder a few fields in struct blk_mq_tag_set, eliminating a few
   holes and shrinking it (Christophe)

 - Remove redundant bdev_get_queue() NULL checks (Juhyung)

 - Add sed-opal single user mode support flag (Luca)

 - Remove SQE128 check in ublk as it isn't needed, saving some memory
   (Ming)

 - Op specific segment checking for cloned requests (Uday)

 - Exclusive open partition scan fixes (Yu)

 - Loop offset/size checking before assigning them in the device (Zhong)

 - Bio polling fixes (me)

* tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux:
  blk-mq: enforce op-specific segment limits in blk_insert_cloned_request
  nvme-fabrics: show well known discovery name
  nvme-tcp: don't access released socket during error recovery
  nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
  nvme: bring back auto-removal of deleted namespaces during sequential scan
  blk-iocost: Pass gendisk to ioc_refresh_params
  nvme: fix sparse warning on effects masking
  block: be a bit more careful in checking for NULL bdev while polling
  block: clear bio->bi_bdev when putting a bio back in the cache
  loop: loop_set_status_from_info() check before assignment
  ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd
  block: remove more NULL checks after bdev_get_queue()
  blk-mq: Reorder fields in 'struct blk_mq_tag_set'
  block: fix scan partition for exclusively open device again
  block: Revert "block: Do not reread partition table on exclusively open device"
  sed-opal: add support flag for SUM in status ioctl

Merge tag 'ceph-for-6.3-rc1' of https://github.com/ceph/ceph-client

2023-03-02T18:48:30+00:00

Pull ceph fixes from Ilya Dryomov:
 "Two small fixes from Xiubo and myself, marked for stable"

* tag 'ceph-for-6.3-rc1' of https://github.com/ceph/ceph-client:
  rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
  ceph: update the time stamps and try to drop the suid/sgid

rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails

2023-02-26T19:03:14+00:00

If getting an ID or setting up a work queue in rbd_dev_create() fails,
use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts
is triggered in do_rbd_add().  The root cause is that the ownership of
these structures is transfered to rbd_dev prematurely and they all end
up getting freed when rbd_dev_create() calls rbd_dev_free() prior to
returning to do_rbd_add().

Found by Linux Verification Center (linuxtesting.org) with SVACE, an
incomplete patch submitted by Natalia Petrova .

Cc: stable@vger.kernel.org
Fixes: 1643dfa4c2c8 ("rbd: introduce a per-device ordered workqueue")
Signed-off-by: Ilya Dryomov