<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/block, branch v3.3-rc4</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>Merge branch 'for-linus' of git://git.kernel.dk/linux-block</title>
<updated>2012-02-11T18:07:11+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-02-11T18:07:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=3ec1e88b33a3bdd852ce8e014052acec7a9da8b5'/>
<id>3ec1e88b33a3bdd852ce8e014052acec7a9da8b5</id>
<content type='text'>
Says Jens:

 "Time to push off some of the pending items.  I really wanted to wait
  until we had the regression nailed, but alas it's not quite there yet.
  But I'm very confident that it's "just" a missing expire on exit, so
  fix from Tejun should be fairly trivial.  I'm headed out for a week on
  the slopes.

  - Killing the barrier part of mtip32xx.  It doesn't really support
    barriers, and it doesn't need them (writes are fully ordered).

  - A few fixes from Dan Carpenter, preventing overflows of integer
    multiplication.

  - A fixup for loop, fixing a previous commit that didn't quite solve
    the partial read problem from Dave Young.

  - A bio integer overflow fix from Kent Overstreet.

  - Improvement/fix of the door "keep locked" part of the cdrom shared
    code from Paolo Benzini.

  - A few cfq fixes from Shaohua Li.

  - A fix for bsg sysfs warning when removing a file it did not create
    from Stanislaw Gruszka.

  - Two fixes for floppy from Vivek, preventing a crash.

  - A few block core fixes from Tejun.  One killing the over-optimized
    ioc exit path, cleaning that up nicely.  Two others fixing an oops
    on elevator switch, due to calling into the scheduler merge check
    code without holding the queue lock."

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix lockdep warning on io_context release put_io_context()
  relay: prevent integer overflow in relay_open()
  loop: zero fill bio instead of return -EIO for partial read
  bio: don't overflow in bio_get_nr_vecs()
  floppy: Fix a crash during rmmod
  floppy: Cleanup disk-&gt;queue before caling put_disk() if add_disk() was never called
  cdrom: move shared static to cdrom_device_info
  bsg: fix sysfs link remove warning
  block: don't call elevator callbacks for plug merges
  block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions
  mtip32xx: removed the irrelevant argument of mtip_hw_submit_io() and the unused member of struct driver_data
  block: strip out locking optimization in put_io_context()
  cdrom: use copy_to_user() without the underscores
  block: fix ioc locking warning
  block: fix NULL icq_cache reference
  block,cfq: change code order
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Says Jens:

 "Time to push off some of the pending items.  I really wanted to wait
  until we had the regression nailed, but alas it's not quite there yet.
  But I'm very confident that it's "just" a missing expire on exit, so
  fix from Tejun should be fairly trivial.  I'm headed out for a week on
  the slopes.

  - Killing the barrier part of mtip32xx.  It doesn't really support
    barriers, and it doesn't need them (writes are fully ordered).

  - A few fixes from Dan Carpenter, preventing overflows of integer
    multiplication.

  - A fixup for loop, fixing a previous commit that didn't quite solve
    the partial read problem from Dave Young.

  - A bio integer overflow fix from Kent Overstreet.

  - Improvement/fix of the door "keep locked" part of the cdrom shared
    code from Paolo Benzini.

  - A few cfq fixes from Shaohua Li.

  - A fix for bsg sysfs warning when removing a file it did not create
    from Stanislaw Gruszka.

  - Two fixes for floppy from Vivek, preventing a crash.

  - A few block core fixes from Tejun.  One killing the over-optimized
    ioc exit path, cleaning that up nicely.  Two others fixing an oops
    on elevator switch, due to calling into the scheduler merge check
    code without holding the queue lock."

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix lockdep warning on io_context release put_io_context()
  relay: prevent integer overflow in relay_open()
  loop: zero fill bio instead of return -EIO for partial read
  bio: don't overflow in bio_get_nr_vecs()
  floppy: Fix a crash during rmmod
  floppy: Cleanup disk-&gt;queue before caling put_disk() if add_disk() was never called
  cdrom: move shared static to cdrom_device_info
  bsg: fix sysfs link remove warning
  block: don't call elevator callbacks for plug merges
  block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions
  mtip32xx: removed the irrelevant argument of mtip_hw_submit_io() and the unused member of struct driver_data
  block: strip out locking optimization in put_io_context()
  cdrom: use copy_to_user() without the underscores
  block: fix ioc locking warning
  block: fix NULL icq_cache reference
  block,cfq: change code order
</pre>
</div>
</content>
</entry>
<entry>
<title>loop: zero fill bio instead of return -EIO for partial read</title>
<updated>2012-02-08T21:07:19+00:00</updated>
<author>
<name>Dave Young</name>
<email>dyoung@redhat.com</email>
</author>
<published>2012-02-08T21:07:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=306df0716aa285d378cc948fafed53c6ed895fe6'/>
<id>306df0716aa285d378cc948fafed53c6ed895fe6</id>
<content type='text'>
commit 8268f5a741 ("deny partial write for loop dev fd") tried to fix the
loop device partial read information leak problem.  But it changed the
semantics of read behavior.  When we read beyond the end of the device we
should get 0 bytes, which is normal behavior, we should not just return
-EIO

Instead of returning -EIO, zero out the bio to avoid information leak in
case of partail read.

Signed-off-by: Dave Young &lt;dyoung@redhat.com&gt;
Reviewed-by: Jeff Moyer &lt;jmoyer@redhat.com&gt;
Tested-by: Jeff Moyer &lt;jmoyer@redhat.com&gt;
Cc: Dmitry Monakhov &lt;dmonakhov@sw.ru&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 8268f5a741 ("deny partial write for loop dev fd") tried to fix the
loop device partial read information leak problem.  But it changed the
semantics of read behavior.  When we read beyond the end of the device we
should get 0 bytes, which is normal behavior, we should not just return
-EIO

Instead of returning -EIO, zero out the bio to avoid information leak in
case of partail read.

Signed-off-by: Dave Young &lt;dyoung@redhat.com&gt;
Reviewed-by: Jeff Moyer &lt;jmoyer@redhat.com&gt;
Tested-by: Jeff Moyer &lt;jmoyer@redhat.com&gt;
Cc: Dmitry Monakhov &lt;dmonakhov@sw.ru&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>floppy: Fix a crash during rmmod</title>
<updated>2012-02-08T19:03:39+00:00</updated>
<author>
<name>Vivek Goyal</name>
<email>vgoyal@redhat.com</email>
</author>
<published>2012-02-08T19:03:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4609dff6b5d11e1ed5ff935e15f9f6022acb312b'/>
<id>4609dff6b5d11e1ed5ff935e15f9f6022acb312b</id>
<content type='text'>
floppy driver does not call add_disk() on all the drives hence we don't take
gendisk reference on request queue for these drives. Don't call put_disk()
with disk-&gt;queue set, otherwise we try to put the reference we never took.

Reported-and-tested-by: Dirk Gouders &lt;gouders@et.bocholt.fh-gelsenkirchen.de&gt;
Signed-off-by: Vivek Goyal&lt;vgoyal@redhat.com&gt;
Acked-by: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
floppy driver does not call add_disk() on all the drives hence we don't take
gendisk reference on request queue for these drives. Don't call put_disk()
with disk-&gt;queue set, otherwise we try to put the reference we never took.

Reported-and-tested-by: Dirk Gouders &lt;gouders@et.bocholt.fh-gelsenkirchen.de&gt;
Signed-off-by: Vivek Goyal&lt;vgoyal@redhat.com&gt;
Acked-by: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>floppy: Cleanup disk-&gt;queue before caling put_disk() if add_disk() was never called</title>
<updated>2012-02-08T19:03:38+00:00</updated>
<author>
<name>Vivek Goyal</name>
<email>vgoyal@redhat.com</email>
</author>
<published>2012-02-08T19:03:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=3f9a5aabd0a9fe0e0cd308506f48963d79169aa7'/>
<id>3f9a5aabd0a9fe0e0cd308506f48963d79169aa7</id>
<content type='text'>
add_disk() takes gendisk reference on request queue. If driver failed during
initialization and never called add_disk() then that extra reference is not
taken. That reference is put in put_disk(). floppy driver allocates the
disk, allocates queue, sets disk-&gt;queue and then relizes that floppy
controller is not present. It tries to tear down everything and tries to
put a reference down in put_disk() which was never taken.

In such error cases cleanup disk-&gt;queue before calling put_disk() so that
we never try to put down a reference which was never taken in first place.

Reported-and-tested-by: Suresh Jayaraman &lt;sjayaraman@suse.com&gt;
Tested-by: Dirk Gouders &lt;gouders@et.bocholt.fh-gelsenkirchen.de&gt;
Signed-off-by: Vivek Goyal &lt;vgoyal@redhat.com&gt;
Acked-by: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
add_disk() takes gendisk reference on request queue. If driver failed during
initialization and never called add_disk() then that extra reference is not
taken. That reference is put in put_disk(). floppy driver allocates the
disk, allocates queue, sets disk-&gt;queue and then relizes that floppy
controller is not present. It tries to tear down everything and tries to
put a reference down in put_disk() which was never taken.

In such error cases cleanup disk-&gt;queue before calling put_disk() so that
we never try to put down a reference which was never taken in first place.

Reported-and-tested-by: Suresh Jayaraman &lt;sjayaraman@suse.com&gt;
Tested-by: Dirk Gouders &lt;gouders@et.bocholt.fh-gelsenkirchen.de&gt;
Signed-off-by: Vivek Goyal &lt;vgoyal@redhat.com&gt;
Acked-by: Tejun Heo &lt;tj@kernel.org&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtip32xx: removed the irrelevant argument of mtip_hw_submit_io() and the unused member of struct driver_data</title>
<updated>2012-02-07T06:54:31+00:00</updated>
<author>
<name>Asai Thambi S P</name>
<email>asamymuthupa@micron.com</email>
</author>
<published>2012-02-07T06:54:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4e8670e26135d8fbfd5e084fddc1a8ed9f8eb4cb'/>
<id>4e8670e26135d8fbfd5e084fddc1a8ed9f8eb4cb</id>
<content type='text'>
Removed the following:
	* irrelevant argument 'barrier' of mtip_hw_submit_io()
	* unused member 'eh_active' of struct driver_data

Signed-off-by: Asai Thambi S P &lt;asamymuthupa@micron.com&gt;
Signed-off-by: Sam Bradshaw &lt;sbradshaw@micron.com&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Removed the following:
	* irrelevant argument 'barrier' of mtip_hw_submit_io()
	* unused member 'eh_active' of struct driver_data

Signed-off-by: Asai Thambi S P &lt;asamymuthupa@micron.com&gt;
Signed-off-by: Sam Bradshaw &lt;sbradshaw@micron.com&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client</title>
<updated>2012-02-02T23:47:33+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-02-02T23:47:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=6c073a7ee250118b8be3a2379c96fd7f78382b06'/>
<id>6c073a7ee250118b8be3a2379c96fd7f78382b06</id>
<content type='text'>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: fix safety of rbd_put_client()
  rbd: fix a memory leak in rbd_get_client()
  ceph: create a new session lock to avoid lock inversion
  ceph: fix length validation in parse_reply_info()
  ceph: initialize client debugfs outside of monc-&gt;mutex
  ceph: change "ceph.layout" xattr to be "ceph.file.layout"
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: fix safety of rbd_put_client()
  rbd: fix a memory leak in rbd_get_client()
  ceph: create a new session lock to avoid lock inversion
  ceph: fix length validation in parse_reply_info()
  ceph: initialize client debugfs outside of monc-&gt;mutex
  ceph: change "ceph.layout" xattr to be "ceph.file.layout"
</pre>
</div>
</content>
</entry>
<entry>
<title>rbd: fix safety of rbd_put_client()</title>
<updated>2012-02-02T20:56:59+00:00</updated>
<author>
<name>Alex Elder</name>
<email>elder@dreamhost.com</email>
</author>
<published>2012-01-29T19:57:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d23a4b3fd6ef70b80411b39b8c8bc548a219ce70'/>
<id>d23a4b3fd6ef70b80411b39b8c8bc548a219ce70</id>
<content type='text'>
The rbd_client structure uses a kref to arrange for cleaning up and
freeing an instance when its last reference is dropped.  The cleanup
routine is rbd_client_release(), and one of the things it does is
delete the rbd_client from rbd_client_list.  It acquires node_lock
to do so, but the way it is done is still not safe.

The problem is that when attempting to reuse an existing rbd_client,
the structure found might already be in the process of getting
destroyed and cleaned up.

Here's the scenario, with "CLIENT" representing an existing
rbd_client that's involved in the race:

 Thread on CPU A                | Thread on CPU B
 ---------------                | ---------------
 rbd_put_client(CLIENT)         | rbd_get_client()
   kref_put()                   |   (acquires node_lock)
     kref-&gt;refcount becomes 0   |   __rbd_client_find() returns CLIENT
     calls rbd_client_release() |   kref_get(&amp;CLIENT-&gt;kref);
                                |   (releases node_lock)
       (acquires node_lock)     |
       deletes CLIENT from list | ...and starts using CLIENT...
       (releases node_lock)     |
       and frees CLIENT         | &lt;-- but CLIENT gets freed here

Fix this by having rbd_put_client() acquire node_lock.  The result
could still be improved, but at least it avoids this problem.

Signed-off-by: Alex Elder &lt;elder@dreamhost.com&gt;
Signed-off-by: Sage Weil &lt;sage@newdream.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The rbd_client structure uses a kref to arrange for cleaning up and
freeing an instance when its last reference is dropped.  The cleanup
routine is rbd_client_release(), and one of the things it does is
delete the rbd_client from rbd_client_list.  It acquires node_lock
to do so, but the way it is done is still not safe.

The problem is that when attempting to reuse an existing rbd_client,
the structure found might already be in the process of getting
destroyed and cleaned up.

Here's the scenario, with "CLIENT" representing an existing
rbd_client that's involved in the race:

 Thread on CPU A                | Thread on CPU B
 ---------------                | ---------------
 rbd_put_client(CLIENT)         | rbd_get_client()
   kref_put()                   |   (acquires node_lock)
     kref-&gt;refcount becomes 0   |   __rbd_client_find() returns CLIENT
     calls rbd_client_release() |   kref_get(&amp;CLIENT-&gt;kref);
                                |   (releases node_lock)
       (acquires node_lock)     |
       deletes CLIENT from list | ...and starts using CLIENT...
       (releases node_lock)     |
       and frees CLIENT         | &lt;-- but CLIENT gets freed here

Fix this by having rbd_put_client() acquire node_lock.  The result
could still be improved, but at least it avoids this problem.

Signed-off-by: Alex Elder &lt;elder@dreamhost.com&gt;
Signed-off-by: Sage Weil &lt;sage@newdream.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rbd: fix a memory leak in rbd_get_client()</title>
<updated>2012-02-02T20:49:27+00:00</updated>
<author>
<name>Alex Elder</name>
<email>elder@dreamhost.com</email>
</author>
<published>2012-01-24T16:08:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=97bb59a03dd6767fcc00be09b0c6d9e5294eeea6'/>
<id>97bb59a03dd6767fcc00be09b0c6d9e5294eeea6</id>
<content type='text'>
If an existing rbd client is found to be suitable for use in
rbd_get_client(), the rbd_options structure is not being
freed as it should.  Fix that.

Signed-off-by: Alex Elder &lt;elder@dreamhost.com&gt;
Signed-off-by: Sage Weil &lt;sage@newdream.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If an existing rbd client is found to be suitable for use in
rbd_get_client(), the rbd_options structure is not being
freed as it should.  Fix that.

Signed-off-by: Alex Elder &lt;elder@dreamhost.com&gt;
Signed-off-by: Sage Weil &lt;sage@newdream.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>nvme: fix merge error due to change of 'make_request_fn' fn type</title>
<updated>2012-01-18T23:41:27+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-01-18T23:41:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=93c3d65b28bab6da520c2add9cb387a0303f8b2d'/>
<id>93c3d65b28bab6da520c2add9cb387a0303f8b2d</id>
<content type='text'>
The type of 'make_request_fn' changed in 5a7bbad27a4 ("block: remove
support for bio remapping from -&gt;make_request"), but the merge of the
nvme driver didn't take that into account, and as a result the driver
would compile with a warning:

  drivers/block/nvme.c: In function 'nvme_alloc_ns':
  drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default]
  include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)'

It's benign, but the warning is annoying.

Reported-by: Stephen Rothwell &lt;sfr@canb.auug.org&gt;
Cc: Matthew Wilcox &lt;matthew.r.wilcox@intel.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The type of 'make_request_fn' changed in 5a7bbad27a4 ("block: remove
support for bio remapping from -&gt;make_request"), but the merge of the
nvme driver didn't take that into account, and as a result the driver
would compile with a warning:

  drivers/block/nvme.c: In function 'nvme_alloc_ns':
  drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default]
  include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)'

It's benign, but the warning is annoying.

Reported-by: Stephen Rothwell &lt;sfr@canb.auug.org&gt;
Cc: Matthew Wilcox &lt;matthew.r.wilcox@intel.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.infradead.org/users/willy/linux-nvme</title>
<updated>2012-01-18T20:34:09+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-01-18T20:34:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=92b5abbb44e05cdbc4483219f30a435dd871a8ea'/>
<id>92b5abbb44e05cdbc4483219f30a435dd871a8ea</id>
<content type='text'>
* git://git.infradead.org/users/willy/linux-nvme: (105 commits)
  NVMe: Set number of queues correctly
  NVMe: Version 0.8
  NVMe: Set queue flags correctly
  NVMe: Simplify nvme_unmap_user_pages
  NVMe: Mark the end of the sg list
  NVMe: Fix DMA mapping for admin commands
  NVMe: Rename IO_TIMEOUT to NVME_IO_TIMEOUT
  NVMe: Merge the nvme_bio and nvme_prp data structures
  NVMe: Change nvme_completion_fn to take a dev
  NVMe: Change get_nvmeq to take a dev instead of a namespace
  NVMe: Simplify completion handling
  NVMe: Update Identify Controller data structure
  NVMe: Implement doorbell stride capability
  NVMe: Version 0.7
  NVMe: Don't probe namespace 0
  Fix calculation of number of pages in a PRP List
  NVMe: Create nvme_identify and nvme_get_features functions
  NVMe: Fix memory leak in nvme_dev_add()
  NVMe: Fix calls to dma_unmap_sg
  NVMe: Correct sg list setup in nvme_map_user_pages
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* git://git.infradead.org/users/willy/linux-nvme: (105 commits)
  NVMe: Set number of queues correctly
  NVMe: Version 0.8
  NVMe: Set queue flags correctly
  NVMe: Simplify nvme_unmap_user_pages
  NVMe: Mark the end of the sg list
  NVMe: Fix DMA mapping for admin commands
  NVMe: Rename IO_TIMEOUT to NVME_IO_TIMEOUT
  NVMe: Merge the nvme_bio and nvme_prp data structures
  NVMe: Change nvme_completion_fn to take a dev
  NVMe: Change get_nvmeq to take a dev instead of a namespace
  NVMe: Simplify completion handling
  NVMe: Update Identify Controller data structure
  NVMe: Implement doorbell stride capability
  NVMe: Version 0.7
  NVMe: Don't probe namespace 0
  Fix calculation of number of pages in a PRP List
  NVMe: Create nvme_identify and nvme_get_features functions
  NVMe: Fix memory leak in nvme_dev_add()
  NVMe: Fix calls to dma_unmap_sg
  NVMe: Correct sg list setup in nvme_map_user_pages
  ...
</pre>
</div>
</content>
</entry>
</feed>
