<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/bcma, branch v3.8-rc2</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd</title>
<updated>2012-12-19T20:47:41+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-12-19T20:47:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=ca2a88f56aa385890c7fd4ce9d2722b0848ca990'/>
<id>ca2a88f56aa385890c7fd4ce9d2722b0848ca990</id>
<content type='text'>
Pull MTD updates from David Woodhouse:
 - Various cleanups especially in NAND tests
 - Add support for NAND flash on BCMA bus
 - DT support for sh_flctl and denali NAND drivers
 - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
 - Fix JFFS2 locking bug in ENOMEM failure path
 - New SPI flash chips, as usual
 - Support writing in 'reliable mode' for DiskOnChip G4
 - Debugfs support in nandsim

* tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits)
  mtd: nand: typo in nand_id_has_period() comments
  mtd: nand/gpio: use io{read,write}*_rep accessors
  mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.
  mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems
  mtd: nand/docg4: fix and improve read of factory bbt
  mtd: nand/docg4: reserve bb marker area in ecclayout
  mtd: nand/docg4: add support for writing in reliable mode
  mtd: mxc_nand: reorder part_probes to let cmdline override other sources
  mtd: mxc_nand: fix unbalanced clk_disable() in error path
  mtd: nandsim: Introduce debugfs infrastructure
  mtd: physmap_of: error checking to prevent a NULL pointer dereference
  mtg: docg3: potential divide by zero in doc_write_oob()
  mtd: bcm47xxnflash: writing support
  mtd: tests/read: initialize buffer for whole next page
  mtd: at91: atmel_nand: return bit flips for the PMECC read_page()
  mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c
  mtd: nand: onfi need to be probed in 8 bits mode
  mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
  mtd: nand: print flash size during detection
  mted: nand_wait_ready timeout fix
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull MTD updates from David Woodhouse:
 - Various cleanups especially in NAND tests
 - Add support for NAND flash on BCMA bus
 - DT support for sh_flctl and denali NAND drivers
 - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
 - Fix JFFS2 locking bug in ENOMEM failure path
 - New SPI flash chips, as usual
 - Support writing in 'reliable mode' for DiskOnChip G4
 - Debugfs support in nandsim

* tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits)
  mtd: nand: typo in nand_id_has_period() comments
  mtd: nand/gpio: use io{read,write}*_rep accessors
  mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.
  mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems
  mtd: nand/docg4: fix and improve read of factory bbt
  mtd: nand/docg4: reserve bb marker area in ecclayout
  mtd: nand/docg4: add support for writing in reliable mode
  mtd: mxc_nand: reorder part_probes to let cmdline override other sources
  mtd: mxc_nand: fix unbalanced clk_disable() in error path
  mtd: nandsim: Introduce debugfs infrastructure
  mtd: physmap_of: error checking to prevent a NULL pointer dereference
  mtg: docg3: potential divide by zero in doc_write_oob()
  mtd: bcm47xxnflash: writing support
  mtd: tests/read: initialize buffer for whole next page
  mtd: at91: atmel_nand: return bit flips for the PMECC read_page()
  mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c
  mtd: nand: onfi need to be probed in 8 bits mode
  mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
  mtd: nand: print flash size during detection
  mted: nand_wait_ready timeout fix
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus</title>
<updated>2012-12-14T22:27:45+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-12-14T22:27:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=cebfa85eb86d92bf85d3b041c6b044184517a988'/>
<id>cebfa85eb86d92bf85d3b041c6b044184517a988</id>
<content type='text'>
Pull MIPS updates from Ralf Baechle:
 "The MIPS bits for 3.8.  This also includes a bunch fixes that were
  sitting in the linux-mips.org git tree for a long time.  This pull
  request contains updates to several OCTEON drivers and the board
  support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B,
  updates to the SSB bus support, MIPS kexec code and adds support for
  kdump.

  When pulling this, there are two expected merge conflicts in
  include/linux/bcma/bcma_driver_chipcommon.h which are trivial to
  resolve, just remove the conflict markers and keep both alternatives."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits)
  MIPS: PMC-Sierra Yosemite: Remove support.
  VIDEO: Newport Fix console crashes
  MIPS: wrppmc: Fix build of PCI code.
  MIPS: IP22/IP28: Fix build of EISA code.
  MIPS: RB532: Fix build of prom code.
  MIPS: PowerTV: Fix build.
  MIPS: IP27: Correct fucked grammar in ops-bridge.c
  MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled
  MIPS: Fix potencial corruption
  MIPS: Fix for warning from FPU emulation code
  MIPS: Handle COP3 Unusable exception as COP1X for FP emulation
  MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
  MIPS: Remove unused smvp.h
  MIPS/EDAC: Improve OCTEON EDAC support.
  MIPS: OCTEON: Add definitions for OCTEON memory contoller registers.
  MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h
  ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
  MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
  MIPS: Remove usage of CEVT_R4K_LIB config option.
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull MIPS updates from Ralf Baechle:
 "The MIPS bits for 3.8.  This also includes a bunch fixes that were
  sitting in the linux-mips.org git tree for a long time.  This pull
  request contains updates to several OCTEON drivers and the board
  support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B,
  updates to the SSB bus support, MIPS kexec code and adds support for
  kdump.

  When pulling this, there are two expected merge conflicts in
  include/linux/bcma/bcma_driver_chipcommon.h which are trivial to
  resolve, just remove the conflict markers and keep both alternatives."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits)
  MIPS: PMC-Sierra Yosemite: Remove support.
  VIDEO: Newport Fix console crashes
  MIPS: wrppmc: Fix build of PCI code.
  MIPS: IP22/IP28: Fix build of EISA code.
  MIPS: RB532: Fix build of prom code.
  MIPS: PowerTV: Fix build.
  MIPS: IP27: Correct fucked grammar in ops-bridge.c
  MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled
  MIPS: Fix potencial corruption
  MIPS: Fix for warning from FPU emulation code
  MIPS: Handle COP3 Unusable exception as COP1X for FP emulation
  MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
  MIPS: Remove unused smvp.h
  MIPS/EDAC: Improve OCTEON EDAC support.
  MIPS: OCTEON: Add definitions for OCTEON memory contoller registers.
  MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h
  ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
  MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
  MIPS: Remove usage of CEVT_R4K_LIB config option.
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: mips: fix clearing device IRQ</title>
<updated>2012-12-10T20:49:53+00:00</updated>
<author>
<name>Rafał Miłecki</name>
<email>zajec5@gmail.com</email>
</author>
<published>2012-12-10T06:53:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=cbbc0138efe1dcd5426b8fc5d87741f5057aee72'/>
<id>cbbc0138efe1dcd5426b8fc5d87741f5057aee72</id>
<content type='text'>
We were using wrong IRQ number so clearing wasn't working at all.
Depending on a platform this could result in a one device having two
interrupts assigned. On BCM4706 this resulted in all IRQs being broken.

Cc: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Acked-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
We were using wrong IRQ number so clearing wasn't working at all.
Depending on a platform this could result in a one device having two
interrupts assigned. On BCM4706 this resulted in all IRQs being broken.

Cc: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Acked-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: unify naming schema for clock functions</title>
<updated>2012-12-10T20:47:30+00:00</updated>
<author>
<name>Rafał Miłecki</name>
<email>zajec5@gmail.com</email>
</author>
<published>2012-12-07T11:56:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=5b5ac41447de30cb5ed5e72d3d4e1a9e6e12f640'/>
<id>5b5ac41447de30cb5ed5e72d3d4e1a9e6e12f640</id>
<content type='text'>
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: register watchdog driver</title>
<updated>2012-12-06T19:58:57+00:00</updated>
<author>
<name>Hauke Mehrtens</name>
<email>hauke@hauke-m.de</email>
</author>
<published>2012-12-05T17:46:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a4855f39d4eb3f550ca5f4aac79bd999da42dc54'/>
<id>a4855f39d4eb3f550ca5f4aac79bd999da42dc54</id>
<content type='text'>
Register the watchdog driver to the system if this is a SoC. Using the
watchdog on a non SoC device, like a PCIe card, will make the PCIe
card die when the timeout expired, but starting it again is not
supported by bcma.

Signed-off-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Register the watchdog driver to the system if this is a SoC. Using the
watchdog on a non SoC device, like a PCIe card, will make the PCIe
card die when the timeout expired, but starting it again is not
supported by bcma.

Signed-off-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: add methods for watchdog driver</title>
<updated>2012-12-06T19:58:56+00:00</updated>
<author>
<name>Hauke Mehrtens</name>
<email>hauke@hauke-m.de</email>
</author>
<published>2012-12-05T17:46:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a22a3114a820ca3eadee6af53d90736e5ca68fa1'/>
<id>a22a3114a820ca3eadee6af53d90736e5ca68fa1</id>
<content type='text'>
The watchdog driver wants to set the watchdog timeout in ms and not in
ticks, which is depending on the SoC type and the clock.
Calculate the number of ticks per millisecond and provide two functions
for the watchdog driver. Also return the ticks or millisecond the timer
was set to in case the provided value was bigger than the max allowed
value.

Signed-off-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The watchdog driver wants to set the watchdog timeout in ms and not in
ticks, which is depending on the SoC type and the clock.
Calculate the number of ticks per millisecond and provide two functions
for the watchdog driver. Also return the ticks or millisecond the timer
was set to in case the provided value was bigger than the max allowed
value.

Signed-off-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: set the pmu watchdog if available</title>
<updated>2012-12-06T19:58:56+00:00</updated>
<author>
<name>Hauke Mehrtens</name>
<email>hauke@hauke-m.de</email>
</author>
<published>2012-12-05T17:46:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=f6354c8cf9a3be15de441fad593ce53e63e9bf2a'/>
<id>f6354c8cf9a3be15de441fad593ce53e63e9bf2a</id>
<content type='text'>
Mostly all bcma based devices have a PMU and the PMU watchdog should be
used and not the old one in chip common. This patch also calculates the
maximal number the watchdog could be set to.

Signed-off-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Mostly all bcma based devices have a PMU and the PMU watchdog should be
used and not the old one in chip common. This patch also calculates the
maximal number the watchdog could be set to.

Signed-off-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: add bcma_chipco_alp_clock</title>
<updated>2012-12-06T19:58:56+00:00</updated>
<author>
<name>Hauke Mehrtens</name>
<email>hauke@hauke-m.de</email>
</author>
<published>2012-12-05T17:45:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=56fd5f077223df1284a3501d1e3ba2e5b19d154a'/>
<id>56fd5f077223df1284a3501d1e3ba2e5b19d154a</id>
<content type='text'>
For devices without a PMU the alp clock is always 20000000.

Signed-off-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
For devices without a PMU the alp clock is always 20000000.

Signed-off-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: handle return value of pci_assign_resource</title>
<updated>2012-11-30T18:38:13+00:00</updated>
<author>
<name>Hauke Mehrtens</name>
<email>hauke@hauke-m.de</email>
</author>
<published>2012-11-26T23:30:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4a7267c9a03b9627e5e85c80b307eb4541bab902'/>
<id>4a7267c9a03b9627e5e85c80b307eb4541bab902</id>
<content type='text'>
This fixes the following warning:

  CC      drivers/bcma/driver_pci_host.o
drivers/bcma/driver_pci_host.c: In function 'bcma_core_pci_fixup_addresses':
drivers/bcma/driver_pci_host.c:555:23: error: ignoring return value of
'pci_assign_resource', declared with attribute warn_unused_result
[-Werror=unused-result]

Reported-by: Arend van Spriel &lt;arend@broadcom.com&gt;
Signed-off-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This fixes the following warning:

  CC      drivers/bcma/driver_pci_host.o
drivers/bcma/driver_pci_host.c: In function 'bcma_core_pci_fixup_addresses':
drivers/bcma/driver_pci_host.c:555:23: error: ignoring return value of
'pci_assign_resource', declared with attribute warn_unused_result
[-Werror=unused-result]

Reported-by: Arend van Spriel &lt;arend@broadcom.com&gt;
Signed-off-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bcma: export PLL reading function</title>
<updated>2012-11-22T07:32:28+00:00</updated>
<author>
<name>Rafał Miłecki</name>
<email>zajec5@gmail.com</email>
</author>
<published>2012-11-12T12:03:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=8d4b9e3182634d8b5afb5a144a8c6c24b187bcc1'/>
<id>8d4b9e3182634d8b5afb5a144a8c6c24b187bcc1</id>
<content type='text'>
This is required by NAND flash driver for initializing wait counters.

Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Signed-off-by: Artem Bityutskiy &lt;artem.bityutskiy@linux.intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This is required by NAND flash driver for initializing wait counters.

Signed-off-by: Rafał Miłecki &lt;zajec5@gmail.com&gt;
Signed-off-by: Artem Bityutskiy &lt;artem.bityutskiy@linux.intel.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
