linux.git/drivers/bcma/sprom.c, branch v3.10

bcma: extract board_type from SPROM

2013-03-25T20:43:40+00:00

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: use fallback sprom if sprom on card was not valid

2012-10-19T19:52:53+00:00

Sometimes the PCIe card indicates that it has a sprom somewhere and we
are able to read the memory region, but it is empty and not valid. In
these cases we should try to use the fallback sprom as a last chance.

This is the case for the PCIe cards in my ASUS RT-N66U (BCM4706 + 2
times BCM4331) and I have heard of someone having the same problem with
an other PCIe card connected to an other Broadcom SoC.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

bcma: handle BCM43227

2012-09-24T19:02:07+00:00

Signed-off-by: Rafał Miłecki 
Tested-by: Jack 
Signed-off-by: John W. Linville

bcma: BCM43228 support

2012-08-02T17:51:46+00:00

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: use custom printing functions

2012-07-09T20:36:36+00:00

Having bus number printed makes it much easier to anaylze logs on
systems with more buses. For example Netgear WNDR4500 has 3 AMBA buses
in total, which makes standard log really messy.

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: add constants for chip ids

2012-07-09T20:36:03+00:00

The chip IDs are used all over bcma and no constants where defined.
This patch adds the constants and makes bcma use them.

Acked-by: Arend van Spriel 
Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

bcma: add ext PA workaround for BCM4331 and BCM43431

2012-06-04T19:26:40+00:00

MacBook Pro models with BCM4331 wireless have been found to have the ext
PA lines disabled after resuming from S3 without external power attach.
This causes them to be unable to transmit. Add a workaround to ensure
that the ext PA lines are enabled on BCM4331. Also extend all handling
of ext PA line muxing to BCM43431 as is done in the Broadcom SDK.

BugLink: http://bugs.launchpad.net/bugs/925577
Cc: Arend van Spriel 
Cc: Hauke Mehrtens 
Cc: stable@vger.kernel.org
Signed-off-by: Seth Forshee 
Signed-off-by: John W. Linville

bcma/ssb: parse new attributes from sprom

2012-05-16T16:45:22+00:00

These newly added attributes are used by brcmsmac. Now bcma should
parse all attributes used by brcmsmac out of the sprom.

Signed-off-by: Hauke Mehrtens 
Tested-by: Arend van Spriel 
Signed-off-by: John W. Linville

bcma: read out some additional sprom attributes

2012-05-16T16:45:21+00:00

This code is copied from the ssb sprom read code. These attributes are
partly used by b43 and brcmsmac and should also be read out on bcma
based devices.

Signed-off-by: Hauke Mehrtens 
Tested-by: Arend van Spriel 
Signed-off-by: John W. Linville

ssb/bcma: fill attribute alpha2 from sprom

2012-05-16T16:45:21+00:00

The attribute country_code and alpha2 are two different attributes in
the sprom. country_code contains some code in an 8 bit coding and
alpha2 contains two chars with the country code. The attributes where
read out wrongly in the past and country_code is only available on
sprom version 1.

Signed-off-by: Hauke Mehrtens 
Tested-by: Arend van Spriel 
Signed-off-by: John W. Linville