linux.git/drivers/bcma/main.c, branch v3.2

bcma: add module.h to the modular portions of this driver

2011-10-31T23:32:01+00:00

This will ensure that it continues to build once we remove
the implicit module.h presence from everywhere later on.

Signed-off-by: Paul Gortmaker

Merge branch 'master' of github.com:davem330/net

2011-09-22T07:23:13+00:00

Conflicts:
	MAINTAINERS
	drivers/net/Kconfig
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
	drivers/net/ethernet/broadcom/tg3.c
	drivers/net/wireless/iwlwifi/iwl-pci.c
	drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
	drivers/net/wireless/rt2x00/rt2800usb.c
	drivers/net/wireless/wl12xx/main.c

bcma: add uevent to the bus, to autoload drivers

2011-08-22T18:21:41+00:00

Signed-off-by: David Woodhouse 
Acked-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: add mips driver

2011-08-08T18:29:26+00:00

This adds a mips driver to bcma. This is only found on embedded
devices. For now the driver just initializes the irqs used on this
system.

Signed-off-by: Hauke Mehrtens 
Acked-by: Ralf Baechle 
Signed-off-by: John W. Linville

bcma: add SOC bus

2011-08-08T18:29:25+00:00

This patch adds support for using bcma on a Broadcom SoC as the system
bus. An SoC like the bcm4716 could register this bus and use it to
searches for the bcma cores and register the devices on this bus.

BCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC
is a better name.

Acked-by: Rafał Miłecki 
Signed-off-by: Hauke Mehrtens 
Acked-by: Ralf Baechle 
Signed-off-by: John W. Linville

bcma: add functions to scan cores needed on SoCs

2011-08-08T18:29:24+00:00

The chip common and mips core have to be setup early in the boot
process to get the cpu clock.
bcma_bus_early_register() gets pointers to some space to store the core
data and searches for the chip common and mips core and initializes
chip common. After that was done and the kernel is out of early boot we
just have to run bcma_bus_register() and it will search for the other
cores, initialize and register them.
The cores are getting the same numbers as before.

Acked-by: Rafał Miłecki 
Signed-off-by: Hauke Mehrtens 
Acked-by: Ralf Baechle 
Signed-off-by: John W. Linville

bcma: add check if sprom is available before accessing it.

2011-07-11T19:02:17+00:00

The SoCs like the bcm4716 do not have a sprom on the bcma bus like a
pcie device. It stores the values in some partition on flash memory.
For ssb this informations are read out in the bcm47xx arch code,
something like that should also be implemented for bcma. Without this
patch bcma panics on SoCs.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

bcma: main.c needs to include

2011-06-27T19:09:42+00:00

m68k allmodconfig:

drivers/bcma/main.c: In function ‘bcma_release_core_dev’:
drivers/bcma/main.c:68: error: implicit declaration of function ‘kfree’

Signed-off-by: Geert Uytterhoeven 
--
http://kisskb.ellerman.id.au/kisskb/buildresult/4243344/

 drivers/bcma/main.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
Signed-off-by: John W. Linville

bcma: clean exports of functions

2011-06-20T19:34:19+00:00

Function managing IRQs is needed for external drivers like b43.
On the other side we do not expect writing any hosts drivers outside of
bcma, so this is safe to do not export functions related to this.

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: read SPROM and extract MAC from it

2011-06-03T19:01:07+00:00

In case of BCMA cards SPROM is located in the ChipCommon core, it is
not mapped as separated host window. So far we have met only SPROMs rev
8.
SPROM layout seems to be the same as for SSB buses, so we decided to
share SPROM struct and some defines.
For now we extract MAC address only, this can be improved of course.

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville