Pull regmap fix from Mark Brown:
 "Arnd sent a workaround for a false positive warning which was showing
  up with GCC 14.1"

* tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: maple: work around gcc-14.1 false-positive warning

Pull more RISC-V updates from Palmer Dabbelt:

 - Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
   cache info (via PPTT) on ACPI-based systems.

 - The trap entry/exit code no longer breaks the return address stack
   predictor on many systems, which results in an improvement to trap
   latency.

 - Support for HAVE_ARCH_STACKLEAK.

 - The sv39 linear map has been extended to support 128GiB mappings.

 - The frequency of the mtime CSR is now visible via hwprobe.

* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
  RISC-V: Provide the frequency of time CSR via hwprobe
  riscv: Extend sv39 linear mapping max size to 128G
  riscv: enable HAVE_ARCH_STACKLEAK
  riscv: signal: Remove unlikely() from WARN_ON() condition
  riscv: Improve exception and system call latency
  RISC-V: Select ACPI PPTT drivers
  riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
  riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
  RISC-V: ACPI: Enable SPCR table for console output on RISC-V
  riscv: boot: remove duplicated targets line
  trace: riscv: Remove deprecated kprobe on ftrace support
  riscv: cpufeature: Extract common elements from extension checking
  riscv: Introduce vendor variants of extension helpers
  riscv: Add vendor extensions to /proc/cpuinfo
  riscv: Extend cpufeature.c to detect vendor extensions
  RISC-V: run savedefconfig for defconfig
  RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
  ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
  ACPI: NUMA: change the ACPI_NUMA to a hidden option
  ACPI: NUMA: Add handler for SRAT RINTC affinity structure
  ...

Pull driver core updates from Greg KH:
 "Here is the big set of driver core changes for 6.11-rc1.

  Lots of stuff in here, with not a huge diffstat, but apis are evolving
  which required lots of files to be touched. Highlights of the changes
  in here are:

   - platform remove callback api final fixups (Uwe took many releases
     to get here, finally!)

   - Rust bindings for basic firmware apis and initial driver-core
     interactions.

     It's not all that useful for a "write a whole driver in rust" type
     of thing, but the firmware bindings do help out the phy rust
     drivers, and the driver core bindings give a solid base on which
     others can start their work.

     There is still a long way to go here before we have a multitude of
     rust drivers being added, but it's a great first step.

   - driver core const api changes.

     This reached across all bus types, and there are some fix-ups for
     some not-common bus types that linux-next and 0-day testing shook
     out.

     This work is being done to help make the rust bindings more safe,
     as well as the C code, moving toward the end-goal of allowing us to
     put driver structures into read-only memory. We aren't there yet,
     but are getting closer.

   - minor devres cleanups and fixes found by code inspection

   - arch_topology minor changes

   - other minor driver core cleanups

  All of these have been in linux-next for a very long time with no
  reported problems"

* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
  ARM: sa1100: make match function take a const pointer
  sysfs/cpu: Make crash_hotplug attribute world-readable
  dio: Have dio_bus_match() callback take a const *
  zorro: make match function take a const pointer
  driver core: module: make module_[add|remove]_driver take a const *
  driver core: make driver_find_device() take a const *
  driver core: make driver_[create|remove]_file take a const *
  firmware_loader: fix soundness issue in `request_internal`
  firmware_loader: annotate doctests as `no_run`
  devres: Correct code style for functions that return a pointer type
  devres: Initialize an uninitialized struct member
  devres: Fix memory leakage caused by driver API devm_free_percpu()
  devres: Fix devm_krealloc() wasting memory
  driver core: platform: Switch to use kmemdup_array()
  driver core: have match() callback in struct bus_type take a const *
  MAINTAINERS: add Rust device abstractions to DRIVER CORE
  device: rust: improve safety comments
  MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
  MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
  firmware: rust: improve safety comments
  ...

Pull dmaengine updates from Vinod Koul:
 "New support:

   - New dmaengine_prep_peripheral_dma_vec() to support transfers using
     dma vectors and documentation and user in AXI dma

   - STMicro STM32 DMA3 support and new capabilities of cyclic dma

  Updates:

   - Yaml conversion for Freescale imx dma and qdma bindings,
     sprd sc9860 dma binding

   - Altera msgdma updates for descriptor management"

* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
  dt-bindings: fsl-qdma: fix interrupts 'if' check logic
  dt-bindings: dma: sprd,sc9860-dma: convert to YAML
  dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
  dmaengine: ti: add missing MODULE_DESCRIPTION() macros
  dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
  dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
  dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
  dmaengine: sh: rz-dmac: Fix lockdep assert warning
  dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
  dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
  dmaengine: qcom: gpi: remove unused struct 'reg_info'
  dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
  dt-bindings: fsl-qdma: Convert to yaml format
  dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
  dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
  dmaengine: stm32-dma3: defer channel registration to specify channel name
  dmaengine: add channel device name to channel registration
  dmaengine: stm32-dma3: improve residue granularity
  dmaengine: stm32-dma3: add device_pause and device_resume ops
  dmaengine: stm32-dma3: add DMA_MEMCPY capability
  ...

Pull MSI interrupt updates from Thomas Gleixner:
 "Switch ARM/ARM64 over to the modern per device MSI domains.

  This simplifies the handling of platform MSI and wire to MSI
  controllers and removes about 500 lines of legacy code.

  Aside of that it paves the way for ARM/ARM64 to utilize the dynamic
  allocation of PCI/MSI interrupts and to support the upcoming non
  standard IMS (Interrupt Message Store) mechanism on PCIe devices"

* tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  irqchip/gic-v3-its: Correctly fish out the DID for platform MSI
  irqchip/gic-v3-its: Correctly honor the RID remapping
  genirq/msi: Move msi_device_data to core
  genirq/msi: Remove platform MSI leftovers
  irqchip/irq-mvebu-icu: Remove platform MSI leftovers
  irqchip/irq-mvebu-sei: Switch to MSI parent
  irqchip/mvebu-odmi: Switch to parent MSI
  irqchip/mvebu-gicp: Switch to MSI parent
  irqchip/irq-mvebu-icu: Prepare for real per device MSI
  irqchip/imx-mu-msi: Switch to MSI parent
  irqchip/gic-v2m: Switch to device MSI
  irqchip/gic_v3_mbi: Switch over to parent domain
  genirq/msi: Remove platform_msi_create_device_domain()
  irqchip/mbigen: Remove platform_msi_create_device_domain() fallback
  irqchip/gic-v3-its: Switch platform MSI to MSI parent
  irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI
  irqchip/mbigen: Prepare for real per device MSI
  irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI
  irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]
  irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX
  ...

Haibo Xu <haibo1.xu@intel.com> says:

This patch series enable RISC-V ACPI NUMA support which was based on
the recently approved ACPI ECR[1].

Patch 1/4 add RISC-V specific acpi_numa.c file to parse NUMA information
from SRAT and SLIT ACPI tables.
Patch 2/4 add the common SRAT RINTC affinity structure handler.
Patch 3/4 change the ACPI_NUMA to a hidden option since it would be selected
by default on all supported platform.
Patch 4/4 replace pr_info with pr_debug in arch_acpi_numa_init() to avoid
potential boot noise on ACPI platforms that are not NUMA.

Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next

[1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing

Testing:
Since the ACPI AIA/PLIC support patch set is still under upstream review,
hence it is tested using the poll based HVC SBI console and RAM disk.
1) Build latest Qemu with the following patch backported
   https://github.com/vlsunil/qemu/commit/42bd4eeefd5d4410a68f02d54fee406d8a1269b0

2) Build latest EDK-II
   https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md

3) Build Linux with the following configs enabled
   CONFIG_RISCV_SBI_V01=y
   CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
   CONFIG_NONPORTABLE=y
   CONFIG_HVC_RISCV_SBI=y
   CONFIG_NUMA=y
   CONFIG_ACPI_NUMA=y

4) Build buildroot rootfs.cpio

5) Launch the Qemu machine
   qemu-system-riscv64 -nographic \
   -machine virt,pflash0=pflash0,pflash1=pflash1 -smp 4 -m 8G \
   -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \
   -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \
   -object memory-backend-ram,size=4G,id=m0 \
   -object memory-backend-ram,size=4G,id=m1 \
   -numa node,memdev=m0,cpus=0-1,nodeid=0 \
   -numa node,memdev=m1,cpus=2-3,nodeid=1 \
   -numa dist,src=0,dst=1,val=30 \
   -kernel linux/arch/riscv/boot/Image \
   -initrd buildroot/output/images/rootfs.cpio \
   -append "root=/dev/ram ro console=hvc0 earlycon=sbi"

[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x80000000-0x17fffffff]
[    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x180000000-0x27fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x17fe3bc40-0x17fe3cfff]
[    0.000000] NUMA: NODE_DATA [mem 0x27fff4c40-0x27fff5fff]
...
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x0 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x1 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x2 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x3 -> Node 1

* b4-shazam-merge:
  ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
  ACPI: NUMA: change the ACPI_NUMA to a hidden option
  ACPI: NUMA: Add handler for SRAT RINTC affinity structure
  ACPI: RISCV: Add NUMA support based on SRAT and SLIT

Link: https://lore.kernel.org/r/cover.1718268003.git.haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

There are lots of ACPI enabled systems that aren't NUMA and If the
firmware didn't provide the SRAT/SLIT, then there will be a message
"Failed to initialise from firmware" from arch_acpi_numa_init() which
adding noise to the boot on all of those kind of systems. Replace the
pr_info with pr_debug in arch_acpi_numa_init() to avoid it.

Suggested-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/109354315a02cd22145d2effa4a8c571b69d3e56.1718268003.git.haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

With gcc-14.1, there is a false-postive -Wuninitialized warning in
regcache_maple_drop:

drivers/base/regmap/regcache-maple.c: In function 'regcache_maple_drop':
drivers/base/regmap/regcache-maple.c:113:23: error: 'lower_index' is used uninitialized [-Werror=uninitialized]
  113 |         unsigned long lower_index, lower_last;
      |                       ^~~~~~~~~~~
drivers/base/regmap/regcache-maple.c:113:36: error: 'lower_last' is used uninitialized [-Werror=uninitialized]
  113 |         unsigned long lower_index, lower_last;
      |                                    ^~~~~~~~~~

I've created a reduced test case to see if this needs to be reported
as a gcc, but it appears that the gcc-14.x branch already has a change
that turns this into a more sensible -Wmaybe-uninitialized warning, so
I ended up not reporting it so far.

The reduced test case also produces a warning for gcc-13 and gcc-12
but I don't see that with the version in the kernel.

Link: https://godbolt.org/z/oKbohKqd3
Link: https://lore.kernel.org/all/CAMuHMdWj=FLmkazPbYKPevDrcym2_HDb_U7Mb9YE9ovrP0jJfA@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20240719104030.1382465-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

No more users!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240623142235.943295676@linutronix.de

Pull drm updates from Dave Airlie:
 "There's a lot of stuff in here, amd, i915 and xe have new platform
  work, lots of core rework around EDID handling, some new COMPILE_TEST
  options, maintainer changes and a lots of other stuff. Summary:

  core:
   - deprecate DRM data and return 0 date
   - connector: Create a set of helpers to help with HDMI support
   - Remove driver owner assignments
   - Allow more drivers to compile with COMPILE_TEST
   - Conversions to drm_edid
   - Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
   - Remove drm_mm_replace_node
   - print: Add a drm prefix to warn level messages too, remove
            ___drm_dbg, consolidate prefix handling
   - New monochrome TV mode variant

  ttm:
   - improve number of page faults on some platforms
   - fix test builds under PREEMPT_RT
   - more test coverage

  ci:
   - Require a more recent version of mesa
   - improve farm setup and test generation

  dma-buf:
   - warn if reserving 0 fence slots
   - internal API heap enhancements

  fbdev:
   - Create memory manager optimized fbdev emulation

  panic:
   - Allow to select fonts
   - improve drm_fb_dma_get_scanout_buffer
   - Allow to dump kmsg to the screen

  bridge:
   - Remove redundant checks on bridge->encoder
   - Remove drm_bridge_chain_mode_fixup
   - bridge-connector: Plumb in the new HDMI helper
   - analogix_dp: Various improvements, handle AUX transfers timeout
   - samsung-dsim: Fix timings calculation
   - tc358767: Plenty of small fixes, fix no connector attach, fix
               clocks
   - sii902x: state validation improvements

  panels:
   - Switch panels from register table initialization to proper code
   - Now that the panel code tracks the panel state, remove every ad-hoc
     implementation in the panel drivers
   - More cleanup of prepare / enable state tracking in drivers
   - edp: Drop legacy panel compatibles
   - simple-bridge: Switch to devm_drm_bridge_add
   - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
                 13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
                 BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
                 PM070WL4, Lincoln Technologies LCD197, Ortustech
                 COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti

  amdgpu:
   - DCN 4.0.x support
   - GC 12.0 support
   - GMC 12.0 support
   - SDMA 7.0 support
   - MES12 support
   - MMHUB 4.1 support
   - GFX12 modifier and DCC support
   - lots of IP fixes/updates

  amdkfd:
   - Contiguous VRAM allocations
   - GC 12.0 support
   - SDMA 7.0 support
   - SR-IOV fixes
   - KFD GFX ALU exceptions

  i915:
   - Battlemage Xe2 HPD display enablement
   - Panel Replay enabling
   - DP AUX-less ALPM/LOBF
   - Enable link training failure fallback for DP MST links
   - CMRR (Content Match Refresh Rate) enabling
   - Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
   - Enable eDP AUX based HDR backlight
   - Support replaying GPU hangs with captured context image
   - Automate CCS Mode setting during engine resets
   - lots of refactoring
   - Support replaying GPU hangs with captured context image
   - Increase FLR timeout from 3s to 9s
   - Enable w/a 16021333562 for DG2, MTL and ARL [guc]

  xe:
   - update MAINATINERS
   - New uapi adding OA functionality to Xe
   - expose l3 bank mask
   - fix display detect on ADL-N
   - runtime PM Fixes
   - Fix silent backmerge issues
   - More prep for SR-IOV
   - HWmon additions
   - per client usage info
   - Rework GPU page fault handling
   - Drop EXEC_QUEUE_FLAG_BANNED
   - Add BMG PCI IDs
   - Scheduler fixes and improvements
   - Rename xe_exec_queue::compute to xe_exec_queue::lr
   - Use ttm_uncached for BO with NEEDS_UC flag
   - Rename xe perf layer as xe observation layer
   - lots of refactoring

  radeon:
   - Backlight workaround for iMac
   - Silence UBSAN flex array warnings

  msm:
   - Validate registers XML description against schema in CI
   - core/dpu: SM7150 support
   - mdp5: Add support for MSM8937
   - gpu: Add param for userspace to know if raytracing is supported
   - gpu: X185 support (aka gpu in X1 laptop chips)
   - gpu: a505 support

  ivpu:
   - hardware scheduler support
   - profiling support
   - improvements to the platform support layer
   - firmware handling improvements
   - clocks/power mgmt improvements
   - scheduler/logging improvements

  habanalabs:
   - Gradual sleep in polling memory macro
   - Reduce Gaudi2 MSI-X interrupt count to 128
   - Add Gaudi2-D revision support
   - Add timestamp to CPLD info
   - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
   - Align Gaudi2 interrupt names
   - Check for errors after preboot is ready
   - Change habanalabs maintainer and git repo path

  mgag200:
   - refactoring and improvements
   - Add BMC output
   - enable polling

  nouveau:
   - add registry command line

  v3d:
   - perf counters improvements

  zynqmp:
   - irq and debugfs improvements

  atmel-hlcdc:
   - Support XLCDC in sam9x7

  mipi-dbi:
   - Remove mipi_dbi_machine_little_endian
   - make SPI bits per word configurable
   - support RGB888
   - allow pixel formats to be specified in the DT

  sun4i:
   - Rework the blender setup for DE2

  panfrost:
   - Enable MT8188 support

  vc4:
   - Monochrome TV support

  exynos:
   - fix fallback mode regression
   - fix memory leak
   - Use drm_edid_duplicate() instead of kmemdup()

  etnaviv:
   - fix i.MX8MP NPU clock gating
   - workaround FE register cdc issues on some cores
   - fix DMA sync handling for cached buffers
   - fix job timeout handling
   - keep TS enabled on MMUv2 cores for improved performance

  mediatek:
   - Convert to platform remove callback returning void-
   - Drop chain_mode_fixup call in mode_valid()
   - Fixes the errors of MediaTek display driver found by IGT
   - Add display support for the MT8365-EVK board
   - Fix bit depth overwritten for mtk_ovl_set bit_depth()
   - Fix possible_crtcs calculation
   - Fix spurious kfree()

  ast:
   - refactor mode setting code

  stm:
   - Add LVDS support
   - DSI PHY updates"

* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
  drm/amdgpu/mes12: add missing opcode string
  drm/amdgpu/mes11: update opcode strings
  Revert "drm/amd/display: Reset freesync config before update new state"
  drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
  drm/xe: Drop trace_xe_hw_fence_free
  drm/xe/uapi: Rename xe perf layer as xe observation layer
  drm/amdgpu: remove exp hw support check for gfx12
  drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
  drm/amdgpu: flush all cached ras bad pages to eeprom
  drm/amdgpu: select compute ME engines dynamically
  drm/amd/display: Allow display DCC for DCN401
  drm/amdgpu: select compute ME engines dynamically
  drm/amdgpu/job: Replace DRM_INFO/ERROR logging
  drm/amdgpu: select compute ME engines dynamically
  drm/amd/pm: Ignore initial value in smu response register
  drm/amdgpu: Initialize VF partition mode
  drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
  MAINTAINERS: fix Xinhui's name
  MAINTAINERS: update powerplay and swsmu
  drm/qxl: Pin buffer objects for internal mappings
  ...