linux.git/drivers/base, branch v6.10-rc2 Linux kernel source tree regmap-i2c: Subtract reg size from max_write 2024-05-27T00:30:33+00:00 Jim Wylder jwylder@google.com 2024-05-23T21:14:36+00:00 611b7eb19d0a305d4de00280e4a71a1b15c507fc Currently, when an adapter defines a max_write_len quirk, the data will be chunked into data sizes equal to the max_write_len quirk value. But the payload will be increased by the size of the register address before transmission. The resulting value always ends up larger than the limit set by the quirk. Avoid this error by setting regmap's max_write to the quirk's max_write_len minus the number of bytes for the register and padding. This allows the chunking to work correctly for this limited case without impacting other use-cases. Signed-off-by: Jim Wylder <jwylder@google.com> Link: https://msgid.link/r/20240523211437.2839942-1-jwylder@google.com Signed-off-by: Mark Brown <broonie@kernel.org> 
Currently, when an adapter defines a max_write_len quirk,
the data will be chunked into data sizes equal to the
max_write_len quirk value.  But the payload will be increased by
the size of the register address before transmission.  The
resulting value always ends up larger than the limit set
by the quirk.

Avoid this error by setting regmap's max_write to the quirk's
max_write_len minus the number of bytes for the register and
padding.  This allows the chunking to work correctly for this
limited case without impacting other use-cases.

Signed-off-by: Jim Wylder <jwylder@google.com>
Link: https://msgid.link/r/20240523211437.2839942-1-jwylder@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap 2024-05-23T20:38:31+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-23T20:38:31+00:00 09f8f2c4ca4263b40f766238a92ef9c5f93ea5a5 Pull regmap fix from Mark Brown: "Guenter ran with memory sanitisers and found an issue in the new KUnit tests that Richard added where an assumption in older test code was exposed, this was fixed quickly by Richard" * tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: kunit: Fix array overflow in stride() test 
Pull regmap fix from Mark Brown:
 "Guenter ran with memory sanitisers and found an issue in the new KUnit
  tests that Richard added where an assumption in older test code was
  exposed, this was fixed quickly by Richard"

* tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: kunit: Fix array overflow in stride() test
tracing/treewide: Remove second parameter of __assign_str() 2024-05-23T00:14:47+00:00 Steven Rostedt (Google) rostedt@goodmis.org 2024-05-16T17:34:54+00:00 2c92ca849fcc6ee7d0c358e9959abc9f58661aea With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net> 
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.

This means that with:

  __string(field, mystring)

Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.

There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:

  git grep -l __assign_str | while read a ; do
      sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
      mv /tmp/test-file $a;
  done

I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.

Note, the same updates will need to be done for:

  __assign_str_len()
  __assign_rel_str()
  __assign_rel_str_len()

I tested this with both an allmodconfig and an allyesconfig (build only for both).

[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/

Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>	# xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 2024-05-22T19:26:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-22T19:26:46+00:00 5f16eb0549ab502906fb2a10147dad4b9dc185c4 Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and other driver subsystem updates for 6.10-rc1. Nothing major here, just lots of new drivers and updates for apis and new hardware types. Included in here are: - big IIO driver updates with more devices and drivers added - fpga driver updates - hyper-v driver updates - uio_pruss driver removal, no one uses it, other drivers control the same hardware now - binder minor updates - mhi driver updates - excon driver updates - counter driver updates - accessability driver updates - coresight driver updates - other hwtracing driver updates - nvmem driver updates - slimbus driver updates - spmi driver updates - other smaller misc and char driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits) misc: ntsync: mark driver as "broken" to prevent from building spmi: pmic-arb: Add multi bus support spmi: pmic-arb: Register controller for bus instead of arbiter spmi: pmic-arb: Make core resources acquiring a version operation spmi: pmic-arb: Make the APID init a version operation spmi: pmic-arb: Fix some compile warnings about members not being described dt-bindings: spmi: Deprecate qcom,bus-id dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe() spmi: hisi-spmi-controller: Do not override device identifier dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references spmi: make spmi_bus_type const extcon: adc-jack: Document missing struct members extcon: realtek: Remove unused of_gpio.h extcon: usbc-cros-ec: Convert to platform remove callback returning void extcon: usb-gpio: Convert to platform remove callback returning void extcon: max77843: Convert to platform remove callback returning void extcon: max3355: Convert to platform remove callback returning void extcon: intel-mrfld: Convert to platform remove callback returning void ... 
Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem updates
  for 6.10-rc1. Nothing major here, just lots of new drivers and updates
  for apis and new hardware types. Included in here are:

   - big IIO driver updates with more devices and drivers added

   - fpga driver updates

   - hyper-v driver updates

   - uio_pruss driver removal, no one uses it, other drivers control the
     same hardware now

   - binder minor updates

   - mhi driver updates

   - excon driver updates

   - counter driver updates

   - accessability driver updates

   - coresight driver updates

   - other hwtracing driver updates

   - nvmem driver updates

   - slimbus driver updates

   - spmi driver updates

   - other smaller misc and char driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
  misc: ntsync: mark driver as "broken" to prevent from building
  spmi: pmic-arb: Add multi bus support
  spmi: pmic-arb: Register controller for bus instead of arbiter
  spmi: pmic-arb: Make core resources acquiring a version operation
  spmi: pmic-arb: Make the APID init a version operation
  spmi: pmic-arb: Fix some compile warnings about members not being described
  dt-bindings: spmi: Deprecate qcom,bus-id
  dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
  spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
  spmi: hisi-spmi-controller: Do not override device identifier
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
  spmi: make spmi_bus_type const
  extcon: adc-jack: Document missing struct members
  extcon: realtek: Remove unused of_gpio.h
  extcon: usbc-cros-ec: Convert to platform remove callback returning void
  extcon: usb-gpio: Convert to platform remove callback returning void
  extcon: max77843: Convert to platform remove callback returning void
  extcon: max3355: Convert to platform remove callback returning void
  extcon: intel-mrfld: Convert to platform remove callback returning void
  ...
Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core 2024-05-22T19:13:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-22T19:13:40+00:00 d90be6e4aaf23cd4a2c202891399cbafe669aaab Pull driver core updates from Greg KH: "Here is the small set of driver core and kernfs changes for 6.10-rc1. Nothing major here at all, just a small set of changes for some driver core apis, and minor fixups. Included in here are: - sysfs_bin_attr_simple_read() helper added and used - device_show_string() helper added and used All usages of these were acked by the various maintainers. Also in here are: - kernfs minor cleanup - removed unused functions - typo fix in documentation - pay attention to sysfs_create_link() failures in module.c finally All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: device property: Fix a typo in the description of device_get_child_node_count() kernfs: mount: Remove unnecessary ‘NULL’ values from knparent scsi: Use device_show_string() helper for sysfs attributes platform/x86: Use device_show_string() helper for sysfs attributes perf: Use device_show_string() helper for sysfs attributes IB/qib: Use device_show_string() helper for sysfs attributes hwmon: Use device_show_string() helper for sysfs attributes driver core: Add device_show_string() helper for sysfs attributes treewide: Use sysfs_bin_attr_simple_read() helper sysfs: Add sysfs_bin_attr_simple_read() helper module: don't ignore sysfs_create_link() failures driver core: Remove unused platform_notify, platform_notify_remove 
Pull driver core updates from Greg KH:
 "Here is the small set of driver core and kernfs changes for 6.10-rc1.

  Nothing major here at all, just a small set of changes for some driver
  core apis, and minor fixups. Included in here are:

   - sysfs_bin_attr_simple_read() helper added and used

   - device_show_string() helper added and used

  All usages of these were acked by the various maintainers. Also in
  here are:

   - kernfs minor cleanup

   - removed unused functions

   - typo fix in documentation

   - pay attention to sysfs_create_link() failures in module.c finally

  All of these have been in linux-next for a very long time with no
  reported problems"

* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  device property: Fix a typo in the description of device_get_child_node_count()
  kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
  scsi: Use device_show_string() helper for sysfs attributes
  platform/x86: Use device_show_string() helper for sysfs attributes
  perf: Use device_show_string() helper for sysfs attributes
  IB/qib: Use device_show_string() helper for sysfs attributes
  hwmon: Use device_show_string() helper for sysfs attributes
  driver core: Add device_show_string() helper for sysfs attributes
  treewide: Use sysfs_bin_attr_simple_read() helper
  sysfs: Add sysfs_bin_attr_simple_read() helper
  module: don't ignore sysfs_create_link() failures
  driver core: Remove unused platform_notify, platform_notify_remove
Merge tag 'sched-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2024-05-19T18:38:15+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-19T18:38:15+00:00 8dde191aabba42e9c16c8d9c853a72a062db27ee Pull scheduler fixes from Ingo Molnar: - Fix a sched_balance_newidle setting bug - Fix bug in the setting of /sys/fs/cgroup/test/cpu.max.burst - Fix variable-shadowing build warning - Extend sched-domains debug output - Fix documentation - Fix comments * tag 'sched-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix incorrect initialization of the 'burst' parameter in cpu_max_write() sched/fair: Remove stale FREQUENCY_UTIL comment sched/fair: Fix initial util_avg calculation docs: cgroup-v1: Clarify that domain levels are system-specific sched/debug: Dump domains' level sched/fair: Allow disabling sched_balance_newidle with sched_relax_domain_level arch/topology: Fix variable naming to avoid shadowing 
Pull scheduler fixes from Ingo Molnar:

 - Fix a sched_balance_newidle setting bug

 - Fix bug in the setting of /sys/fs/cgroup/test/cpu.max.burst

 - Fix variable-shadowing build warning

 - Extend sched-domains debug output

 - Fix documentation

 - Fix comments

* tag 'sched-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Fix incorrect initialization of the 'burst' parameter in cpu_max_write()
  sched/fair: Remove stale FREQUENCY_UTIL comment
  sched/fair: Fix initial util_avg calculation
  docs: cgroup-v1: Clarify that domain levels are system-specific
  sched/debug: Dump domains' level
  sched/fair: Allow disabling sched_balance_newidle with sched_relax_domain_level
  arch/topology: Fix variable naming to avoid shadowing
regmap: kunit: Fix array overflow in stride() test 2024-05-17T17:23:12+00:00 Richard Fitzgerald rf@opensource.cirrus.com 2024-05-17T14:47:03+00:00 7ba822189e6060a8a2833b721d430f833bf0db43 Force the max_register of the test regmap to be one register longer than the number of test registers, to prevent an array overflow in the test loop. The test defines num_reg_defaults = 6. With 6 registers and stride == 2 the valid register addresses would be 0, 2, 4, 6, 8, 10. However the loop checks attempting to access the odd address, so on the final register it accesses address 11, and it writes entry [11] of the read/written arrays. Originally this worked because the max_register of the regmap was hardcoded to be BLOCK_TEST_SIZE (== 12). commit 710915743d53 ("regmap: kunit: Run sparse cache tests at non-zero register addresses") introduced the ability to start the test address range from any address, which means adjusting the max_register. If max_register was not forced, it was calculated either from num_reg_defaults or BLOCK_TEST_SIZE. This correctly calculated that with num_reg_defaults == 6 and stride == 2 the final valid address is 10. So the read/written arrays are allocated to contain entries [0..10]. When stride attempted to access [11] it was overflowing the array. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 710915743d53 ("regmap: kunit: Run sparse cache tests at non-zero register addresses") Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://msgid.link/r/20240517144703.1200995-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> 
Force the max_register of the test regmap to be one register longer
than the number of test registers, to prevent an array overflow in
the test loop.

The test defines num_reg_defaults = 6. With 6 registers and
stride == 2 the valid register addresses would be 0, 2, 4, 6, 8, 10.
However the loop checks attempting to access the odd address, so on
the final register it accesses address 11, and it writes entry [11]
of the read/written arrays.

Originally this worked because the max_register of the regmap was
hardcoded to be BLOCK_TEST_SIZE (== 12).

commit 710915743d53 ("regmap: kunit: Run sparse cache tests at non-zero
register addresses")
introduced the ability to start the test address range from any address,
which means adjusting the max_register. If max_register was not forced,
it was calculated either from num_reg_defaults or BLOCK_TEST_SIZE. This
correctly calculated that with num_reg_defaults == 6 and stride == 2 the
final valid address is 10. So the read/written arrays are allocated to
contain entries [0..10]. When stride attempted to access [11] it was
overflowing the array.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 710915743d53 ("regmap: kunit: Run sparse cache tests at non-zero register addresses")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://msgid.link/r/20240517144703.1200995-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux 2024-05-17T16:05:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-17T16:05:46+00:00 ff2632d7d08edc11e8bd0629e9fcfebab25c78b4 Pull powerpc updates from Michael Ellerman: - Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT. - Allow per-process DEXCR (Dynamic Execution Control Register) settings via prctl, notably NPHIE which controls hashst/hashchk for ROP protection. - Install powerpc selftests in sub-directories. Note this changes the way run_kselftest.sh needs to be invoked for powerpc selftests. - Change fadump (Firmware Assisted Dump) to better handle memory add/remove. - Add support for passing additional parameters to the fadump kernel. - Add support for updating the kdump image on CPU/memory add/remove events. - Other small features, cleanups and fixes. Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang, Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui. * tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits) powerpc/fadump: Fix section mismatch warning powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP powerpc/fadump: update documentation about bootargs_append powerpc/fadump: pass additional parameters when fadump is active powerpc/fadump: setup additional parameters for dump capture kernel powerpc/pseries/fadump: add support for multiple boot memory regions selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction" KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info() KVM: PPC: Fix documentation for ppc mmu caps KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#" powerpc/code-patching: Use dedicated memory routines for patching powerpc/code-patching: Test patch_instructions() during boot powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region() powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX powerpc: Fix typos powerpc/eeh: Fix spelling of the word "auxillary" and update comment macintosh/ams: Fix unused variable warning powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large ... 
Pull powerpc updates from Michael Ellerman:

 - Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.

 - Allow per-process DEXCR (Dynamic Execution Control Register) settings
   via prctl, notably NPHIE which controls hashst/hashchk for ROP
   protection.

 - Install powerpc selftests in sub-directories. Note this changes the
   way run_kselftest.sh needs to be invoked for powerpc selftests.

 - Change fadump (Firmware Assisted Dump) to better handle memory
   add/remove.

 - Add support for passing additional parameters to the fadump kernel.

 - Add support for updating the kdump image on CPU/memory add/remove
   events.

 - Other small features, cleanups and fixes.

Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.

* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
  powerpc/fadump: Fix section mismatch warning
  powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
  powerpc/fadump: update documentation about bootargs_append
  powerpc/fadump: pass additional parameters when fadump is active
  powerpc/fadump: setup additional parameters for dump capture kernel
  powerpc/pseries/fadump: add support for multiple boot memory regions
  selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
  KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
  KVM: PPC: Fix documentation for ppc mmu caps
  KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
  KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
  powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
  powerpc/code-patching: Use dedicated memory routines for patching
  powerpc/code-patching: Test patch_instructions() during boot
  powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
  powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
  powerpc: Fix typos
  powerpc/eeh: Fix spelling of the word "auxillary" and update comment
  macintosh/ams: Fix unused variable warning
  powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
  ...
Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel 2024-05-15T16:43:42+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-15T16:43:42+00:00 db5d28c0bfe566908719bec8e25443aabecbb802 Pull drm updates from Dave Airlie: "This is the main pull request for the drm subsystems for 6.10. In drivers the main thing is a new driver for ARM Mali firmware based GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and scattered changes to everything else. In the core a bunch of headers and Kconfig was refactored, along with the addition of a new panic handler which is meant to provide a user friendly message when a panic happens and graphical display is enabled. New drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver Core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing" * tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits) drm/xe/ads: Use flexible-array drm/xe: Use ordered WQ for G2H handler drm/msm/gen_header: allow skipping the validation drm/msm/a6xx: Cleanup indexed regs const'ness drm/msm: Add devcoredump support for a750 drm/msm: Adjust a7xx GBIF debugbus dumping drm/msm: Update a6xx registers XML drm/msm: Fix imported a750 snapshot header for upstream drm/msm: Import a750 snapshot registers from kgsl MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails drm/msm/adreno: fix CP cycles stat retrieval on a7xx drm/msm/a7xx: allow writing to CP_BV counter selection registers drm: zynqmp_dpsub: Always register bridge Revert "drm/bridge: ti-sn65dsi83: Fix enable error path" drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer() drm/fbdev-generic: Do not set physical framebuffer address drm/panthor: Fix the FW reset logic drm/panthor: Make sure we handle 'unknown group state' case properly ... 
Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm subsystems for 6.10.

  In drivers the main thing is a new driver for ARM Mali firmware based
  GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
  scattered changes to everything else.

  In the core a bunch of headers and Kconfig was refactored, along with
  the addition of a new panic handler which is meant to provide a user
  friendly message when a panic happens and graphical display is
  enabled.

  New drivers:
   - panthor: ARM Mali/Immortalis CSF-based GPU driver

  Core:
   - add a CONFIG_DRM_WERROR option
   - make more headers self-contained
   - grab resv lock in pin/unpin
   - fix vmap resv locking
   - EDID/eDP panel matching
   - Kconfig cleanups
   - DT sound bindings
   - Add SIZE_HINTS property for cursor planes
   - Add struct drm_edid_product_id and helpers.
   - Use drm device based logging in more drm functions.
   - drop seq_file.h from a bunch of places
   - use drm_edid driver conversions

  dp:
   - DP Tunnel documentation
   - MST read sideband cap
   - Adaptive sync SDP prep work

  ttm:
   - improve placement for TTM BOs in idle/busy handling

  panic:
   - Fixes for drm-panic, and option to test it.
   - Add drm panic to simpledrm, mgag200, imx, ast

  bridge:
   - improve init ordering
   - adv7511: allow GPIO pin sharing
   - tc358775: add tc358675 support

  panel:
   - AUO B120XAN01.0
   - Samsung s6e3fa7
   - BOE NT116WHM-N44
   - CMN N116BCA-EA1,
   - CrystalClear CMT430B19N00
   - Startek KD050HDFIA020-C020A
   - powertip PH128800T006-ZHC01
   - Innolux G121X1-L03
   - LG sw43408
   - Khadas TS050 V2
   - EDO RM69380 OLED
   - CSOT MNB601LS1-1

  amdgpu:
   - HDCP/ODM/RAS fixes
   - Devcoredump improvements
   - Expose VCN activity via sysfs
   - SMY 13.0.x updates
   - Enable fast updates on DCN 3.1.4
   - Add dclk and vclk reporting on additional devices
   - Add ACA RAS infrastructure
   - Implement TLB flush fence
   - EEPROM handling fixes
   - SMUIO 14.0.2 support
   - SMU 14.0.1 Updates
   - SMU 14.0.2 support
   - Sync page table freeing with TLB flushes
   - DML2 refactor
   - DC debug improvements
   - DCN 3.5.x Updates
   - GPU reset fixes
   - HDP fix for second GFX pipe on GC 10.x
   - Enable secondary GFX pipe on GC 10.3
   - Refactor and clean up BACO/BOCO/BAMACO handling
   - Remove invalid TTM resource start check
   - UAF fix in VA IOCTL
   - GPUVM page fault redirection to secondary IH rings for IH 6.x
   - Initial support for mapping kernel queues via MES
   - Fix VRAM memory accounting

  amdkfd:
   - MQD handling cleanup
   - Preemption handling fixes for XCDs
   - TLB flush fix for GC 9.4.2
   - Properly clean up workqueue during module unload
   - Fix memory leak process create failure
   - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
   - Fix eviction fence handling
   - Fix leak in GPU memory allocation failure case
   - DMABuf import handling fix
   - Enable SQ watchpoint for gfx10

  i915:
   - Adding new DG2 PCI ID
   - add context hints for GT frequency
   - enable only one CCS for compute workloads
   - new workarounds
   - Fix UAF on destroy against retire race and remove two earlier partial fixes
   - Limit the reserved VM space to only the platforms that need it
   - Fix gt reset with GuC submission is disable
   - Add and use gt_to_guc() wrapper

  i915/xe display:
   - Lunar Lake display enabling, including cdclk and other refactors
   - BIOS/VBT/opregion related refactor
   - Digital port related refactor/clean-up
   - Fix 2s boot time regression on DP panel replay init
   - Remove duplication on audio enable/disable on SDVO and g4x+ DP
   - Disable AuxCCS framebuffers if built for Xe
   - Make crtc disable more atomic
   - Increase DP idle pattern wait timeout to 2ms
   - Start using container_of_const() for some extra const safety
   - Fix Jasper Lake boot freeze
   - Enable MST mode for 128b/132b single-stream sideband
   - Enable Adaptive Sync SDP Support for DP
   - Fix MTL supported DP rates - removal of UHBR13.5
   - PLL refactoring
   - Limit eDP MSO pipe only for display version 20
   - More display refactor towards independence from i915 dev_priv
   - Convert i915/xe fbdev to DRM client
   - More initial work to make display code more independent from i915

  xe:
   - improved error capture
   - clean up some uAPI leftovers
   - devcoredump update
   - Add BMG mocs table
   - Handle GSCCS ER interrupt
   - Implement xe2- and GuC workarounds
   - struct xe_device cleanup
   - Hwmon updates
   - Add LRC parsing for more GPU instruction
   - Increase VM_BIND number of per-ioctl Ops
   - drm/xe: Add XE_BO_GGTT_INVALIDATE flag
   - Initial development for SR-IOV support
   - Add new PCI IDs to DG2 platform
   - Move userptr over to start using hmm_range_fault

  msm:
   - Switched to generating register header files during build process
     instead of shipping pre-generated headers
   - Merged DPU and MDP4 format databases.
   - DP:
     - Stop using compat string to distinguish DP and eDP cases
     - Added support for X Elite platform (X1E80100)
     - Reworked DP aux/audio support
     - Added SM6350 DP to the bindings
   - GPU:
     - a7xx perfcntr reg fixes
     - MAINTAINERS updates
     - a750 devcoredump support

  radeon:
   - Silence UBSAN warnings related to flexible arrays

  nouveau:
   - move some uAPI objects to uapi headers

  omapdrm:
   - console fix

  ast:
   - add i2c polling

  qaic:
   - add debugfs entries

  exynos:
   - fix platform_driver .owner
   - drop cleanup code

  mediatek:
   - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
   - Add GAMMA 12-bit LUT support for MT8188
   - Rename mtk_drm_* to mtk_*
   - Drop driver owner initialization
   - Correct calculation formula of PHY Timing"

* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
  drm/xe/ads: Use flexible-array
  drm/xe: Use ordered WQ for G2H handler
  drm/msm/gen_header: allow skipping the validation
  drm/msm/a6xx: Cleanup indexed regs const'ness
  drm/msm: Add devcoredump support for a750
  drm/msm: Adjust a7xx GBIF debugbus dumping
  drm/msm: Update a6xx registers XML
  drm/msm: Fix imported a750 snapshot header for upstream
  drm/msm: Import a750 snapshot registers from kgsl
  MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
  MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
  drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
  drm/msm/adreno: fix CP cycles stat retrieval on a7xx
  drm/msm/a7xx: allow writing to CP_BV counter selection registers
  drm: zynqmp_dpsub: Always register bridge
  Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
  drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
  drm/fbdev-generic: Do not set physical framebuffer address
  drm/panthor: Fix the FW reset logic
  drm/panthor: Make sure we handle 'unknown group state' case properly
  ...
arch/topology: Fix variable naming to avoid shadowing 2024-05-15T08:22:16+00:00 Vincent Guittot vincent.guittot@linaro.org 2024-04-25T07:37:09+00:00 e5bc44e47c531860be96ac615314b1ab23d5aa2b Using 'hw_pressure' for local variable name is confusing in regard to the per-CPU 'hw_pressure' variable that uses the same name: include/linux/arch_topology.h:DECLARE_PER_CPU(unsigned long, hw_pressure); ... which puts it into a global scope for all code that includes <linux/topology.h>, shadowing the local variable. Rename it to avoid compiler confusion & Sparse warnings. [ mingo: Expanded the changelog. ] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20240425073709.379016-1-vincent.guittot@linaro.org Closes: https://lore.kernel.org/oe-kbuild-all/202404250740.VhQQoD7N-lkp@intel.com/ Fixes: d4dbc991714e ("sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()") Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # QC SM8550 QRD 
Using 'hw_pressure' for local variable name is confusing in regard to the
per-CPU 'hw_pressure' variable that uses the same name:

  include/linux/arch_topology.h:DECLARE_PER_CPU(unsigned long, hw_pressure);

... which puts it into a global scope for all code that includes
<linux/topology.h>, shadowing the local variable.

Rename it to avoid compiler confusion & Sparse warnings.

[ mingo: Expanded the changelog. ]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240425073709.379016-1-vincent.guittot@linaro.org
Closes: https://lore.kernel.org/oe-kbuild-all/202404250740.VhQQoD7N-lkp@intel.com/
Fixes: d4dbc991714e ("sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()")
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # QC SM8550 QRD