Pull power management updates from Rafael Wysocki:
 "These update cpufreq (core and drivers), cpuidle (polling state
  implementation and the PSCI driver), the OPP (operating performance
  points) framework, devfreq (core and drivers), the power capping RAPL
  (Running Average Power Limit) driver, the Energy Model support, the
  generic power domains (genpd) framework, the ACPI device power
  management, the core system-wide suspend code and power management
  utilities.

  Specifics:

   - Use local_clock() instead of jiffies in the cpufreq statistics to
     improve accuracy (Viresh Kumar).

   - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
     drivers (Viresh Kumar).

   - Clean up the cpufreq core, the intel_pstate driver and the
     schedutil cpufreq governor (Rafael Wysocki).

   - Fix up error code paths in the sti-cpufreq and mediatek cpufreq
     drivers (Yangtao Li, Qinglang Miao).

   - Fix cpufreq_online() to return error codes instead of success (0)
     in all cases when it fails (Wang ShaoBo).

   - Add mt8167 support to the mediatek cpufreq driver and blacklist
     mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).

   - Modify the tegra194 cpufreq driver to always return values from the
     frequency table as the current frequency and clean up that driver
     (Sumit Gupta, Jon Hunter).

   - Modify the arm_scmi cpufreq driver to allow it to discover the
     power scale present in the performance protocol and provide this
     information to the Energy Model (Lukasz Luba).

   - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
     Rohár).

   - Clean up the CPPC cpufreq driver (Ionela Voinescu).

   - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
     Bergmann).

   - Rework the poling interval selection for the polling state in
     cpuidle (Mel Gorman).

   - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
     (Ulf Hansson).

   - Modify the OPP framework to support empty (node-less) OPP tables in
     DT for passing dependency information (Nicola Mazzucato).

   - Fix potential lockdep issue in the OPP core and clean up the OPP
     core (Viresh Kumar).

   - Modify dev_pm_opp_put_regulators() to accept a NULL argument and
     update its users accordingly (Viresh Kumar).

   - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).

   - Add support for governor feature flags to devfreq, make devfreq
     sysfs file permissions depend on the governor and clean up the
     devfreq core (Chanwoo Choi).

   - Clean up the tegra20 devfreq driver and deprecate it to allow
     another driver based on EMC_STAT to be used instead of it (Dmitry
     Osipenko).

   - Add interconnect support to the tegra30 devfreq driver, allow it to
     take the interconnect and OPP information from DT and clean it up
     (Dmitry Osipenko).

   - Add interconnect support to the exynos-bus devfreq driver along
     with interconnect properties documentation (Sylwester Nawrocki).

   - Add suport for AMD Fam17h and Fam19h processors to the RAPL power
     capping driver (Victor Ding, Kim Phillips).

   - Fix handling of overly long constraint names in the powercap
     framework (Lukasz Luba).

   - Fix the wakeup configuration handling for bridges in the ACPI
     device power management core (Rafael Wysocki).

   - Add support for using an abstract scale for power units in the
     Energy Model (EM) and document it (Lukasz Luba).

   - Add em_cpu_energy() micro-optimization to the EM (Pavankumar
     Kondeti).

   - Modify the generic power domains (genpd) framwework to support
     suspend-to-idle (Ulf Hansson).

   - Fix creation of debugfs nodes in genpd (Thierry Strudel).

   - Clean up genpd (Lina Iyer).

   - Clean up the core system-wide suspend code and make it print driver
     flags for devices with debug enabled (Alex Shi, Patrice Chotard,
     Chen Yu).

   - Modify the ACPI system reboot code to make it prepare for system
     power off to avoid confusing the platform firmware (Kai-Heng Feng).

   - Update the pm-graph (multiple changes, mostly usability-related)
     and cpupower (online and offline CPU information support) PM
     utilities (Todd Brandt, Brahadambal Srinivasan)"

* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
  cpufreq: Fix cpufreq_online() return value on errors
  cpufreq: Fix up several kerneldoc comments
  cpufreq: stats: Use local_clock() instead of jiffies
  cpufreq: schedutil: Simplify sugov_update_next_freq()
  cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
  PM: domains: create debugfs nodes when adding power domains
  opp: of: Allow empty opp-table with opp-shared
  dt-bindings: opp: Allow empty OPP tables
  media: venus: dev_pm_opp_put_*() accepts NULL argument
  drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
  drm/lima: dev_pm_opp_put_*() accepts NULL argument
  PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
  opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
  opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
  cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
  opp: Reduce the size of critical section in _opp_kref_release()
  PM / EM: Micro optimization in em_cpu_energy
  cpufreq: arm_scmi: Discover the power scale in performance protocol
  ...

Pull regmap updates from Mark Brown:
 "This is quite a busy release for regmap with two substantial features
  being added:

    - Support for register maps Soundwire 1.2 multi-byte operations,
      allowing atomic support for registers larger than a single byte.

    - Support for relaxed I/O without barriers in MMIO regmaps, allowing
      them to be used efficiently on systems where default MMIO
      operations include barriers.

  There was also an addition and revert of use of the new Soundwire
  support for RT715 due to build issues with the driver built in, my
  tests only covered building it as a module, the patch wasn't just
  dropped as it had already been merged elsewhere"

* tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  ASoC: rt715: Fix build
  regmap: sdw: add required header files
  regmap: Remove duplicate `type` field from regmap `regcache_sync` trace event
  regmap: Fix order of regmap write log
  regmap: mmio: add config option to allow relaxed MMIO accesses

Pull irq updates from Thomas Gleixner:
 "Generic interrupt and irqchips subsystem updates. Unusually, there is
  not a single completely new irq chip driver, just new DT bindings and
  extensions of existing drivers to accomodate new variants!

  Core:

   - Consolidation and robustness changes for irq time accounting

   - Cleanup and consolidation of irq stats

   - Remove the fasteoi IPI flow which has been proved useless

   - Provide an interface for converting legacy interrupt mechanism into
     irqdomains

  Drivers:

   - Preliminary support for managed interrupts on platform devices

   - Correctly identify allocation of MSIs proxyied by another device

   - Generalise the Ocelot support to new SoCs

   - Improve GICv4.1 vcpu entry, matching the corresponding KVM
     optimisation

   - Work around spurious interrupts on Qualcomm PDC

   - Random fixes and cleanups"

* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
  driver core: platform: Add devm_platform_get_irqs_affinity()
  ACPI: Drop acpi_dev_irqresource_disabled()
  resource: Add irqresource_disabled()
  genirq/affinity: Add irq_update_affinity_desc()
  irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
  irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
  platform-msi: Track shared domain allocation
  irqchip/ti-sci-intr: Fix freeing of irqs
  irqchip/ti-sci-inta: Fix printing of inta id on probe success
  drivers/irqchip: Remove EZChip NPS interrupt controller
  Revert "genirq: Add fasteoi IPI flow"
  irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
  irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
  irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
  irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
  irqchip/ocelot: Add support for Jaguar2 platforms
  irqchip/ocelot: Add support for Serval platforms
  irqchip/ocelot: Add support for Luton platforms
  irqchip/ocelot: prepare to support more SoC
  ...

Pull driver core updates from Greg KH:
 "Here is the big driver core updates for 5.11-rc1

  This time there was a lot of different work happening here for some
  reason:

   - redo of the fwnode link logic, speeding it up greatly

   - auxiliary bus added (this was a tag that will be pulled in from
     other trees/maintainers this merge window as well, as driver
     subsystems started to rely on it)

   - platform driver core cleanups on the way to fixing some long-time
     api updates in future releases

   - minor fixes and tweaks.

  All have been in linux-next with no (finally) reported issues. Testing
  there did helped in shaking issues out a lot :)"

* tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
  driver core: platform: don't oops in platform_shutdown() on unbound devices
  ACPI: Use fwnode_init() to set up fwnode
  misc: pvpanic: Replace OF headers by mod_devicetable.h
  misc: pvpanic: Combine ACPI and platform drivers
  usb: host: sl811: Switch to use platform_get_mem_or_io()
  vfio: platform: Switch to use platform_get_mem_or_io()
  driver core: platform: Introduce platform_get_mem_or_io()
  dyndbg: fix use before null check
  soc: fix comment for freeing soc_dev_attr
  driver core: platform: use bus_type functions
  driver core: platform: change logic implementing platform_driver_probe
  driver core: platform: reorder functions
  driver core: make driver_probe_device() static
  driver core: Fix a couple of typos
  driver core: Reorder devices on successful probe
  driver core: Delete pointless parameter in fwnode_operations.add_links
  driver core: Refactor fw_devlink feature
  efi: Update implementation of add_links() to create fwnode links
  of: property: Update implementation of add_links() to create fwnode links
  driver core: Use device's fwnode to check if it is waiting for suppliers
  ...

Pull sound updates from Takashi Iwai:
 "Lots of changes (slightly more code increase than usual) at this time,
  while most of code changes are ASoC driver-specific.

  Here are some highlights:

  Core:

   - The new auxiliary bus implementation for Intel DSP, which will be
     used by other drivers as well

   - Lots of ASoC core cleanups and refactoring

   - UBSAN and KCSAN fixes in rawmidi, sequencer and a few others

   - Compress-offload API enhancement for the pause during draining

  HD- and USB-audio:

   - Enhancements of the USB-audio implicit feedback support, including
     better full-duplex operations

   - Continued CA0132 improvements and fixes

   - A few new quirk entries, HDMI audio fixes

  ASoC:

   - Support for boot time selection of Intel DSP firmware, which should
     help distros/users testing new stuff more easily; the kconfig was
     moved to boot time option, too

   - Some basic DPCM support in audio graph card

   - Removal of old pre-DT Freescale drivers

   - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
     Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek
     RT715, Qualcomm SM8250 and simple GPIO based muxes"

* tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits)
  ALSA: pcm: oss: Fix potential out-of-bounds shift
  ALSA: usb-audio: Fix potential out-of-bounds shift
  ALSA: hda/ca0132 - Add ZxR surround DAC setup.
  ALSA: hda/ca0132 - Add 8051 PLL write helper functions.
  ALSA: hda/hdmi: packet buffer index must be set before reading value
  ASoC: SOF: imx: update kernel-doc description
  ASoC: mediatek: mt8183: delete some unreachable code
  ASoC: mediatek: mt8183: add PM ops to machine drivers
  ASoC: topology: Fix wrong size check
  ASoC: topology: Add missing size check
  ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err
  ASoC: SOF: modify the SOF_DBG flags
  ASoC: SOF: Intel: hda: remove duplicated status dump
  ASoC: rt1015p: delay 300ms after SDB pulling high for calibration
  ASoC: rt1015p: move SDB control from trigger to DAPM
  ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()
  ALSA: usb-audio: Fix control 'access overflow' errors from chmap
  ALSA: hda/hdmi: always print pin NIDs as hexadecimal
  ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button
  ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions.
  ...

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

For many workloads, pagetable consumption is significant and it makes
sense to expose it in the memory.stat for the memory cgroups.  However at
the moment, the pagetables are accounted per-zone.  Converting them to
per-node and using the right interface will correctly account for the
memory cgroups as well.

[akpm@linux-foundation.org: export __mod_lruvec_page_state to modules for arch/mips/kvm/]

Link: https://lkml.kernel.org/r/20201130212541.2781790-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* pm-sleep:
  PM: sleep: Add dev_wakeup_path() helper
  PM / suspend: fix kernel-doc markup
  PM: sleep: Print driver flags for all devices during suspend/resume

* pm-acpi:
  PM: ACPI: Refresh wakeup device power configuration every time
  PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()
  PM: ACPI: reboot: Use S5 for reboot

* pm-domains:
  PM: domains: create debugfs nodes when adding power domains
  PM: domains: replace -ENOTSUPP with -EOPNOTSUPP

* powercap:
  powercap: Adjust printing the constraint name with new line
  powercap: RAPL: Add AMD Fam19h RAPL support
  powercap: Add AMD Fam17h RAPL support
  powercap/intel_rapl_msr: Convert rapl_msr_priv into pointer
  x86/msr-index: sort AMD RAPL MSRs by address

* pm-cpuidle:
  cpuidle: Select polling interval based on a c-state with a longer target residency
  cpuidle: psci: Enable suspend-to-idle for PSCI OSI mode
  PM: domains: Enable dev_pm_genpd_suspend|resume() for suspend-to-idle
  PM: domains: Rename pm_genpd_syscore_poweroff|poweron()

* pm-em:
  PM / EM: Micro optimization in em_cpu_energy
  PM: EM: Update Energy Model with new flag indicating power scale
  PM: EM: update the comments related to power scale
  PM: EM: Clarify abstract scale usage for power values in Energy Model

Pull irqchip updates for 5.11 from Marc Zyngier:

  - Preliminary support for managed interrupts on platform devices
  - Correctly identify allocation of MSIs proxyied by another device
  - Remove the fasteoi IPI flow which has been proved useless
  - Generalise the Ocelot support to new SoCs
  - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
  - Work around spurious interrupts on Qualcomm PDC
  - Random fixes and cleanups

Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org