Bartosz Golaszewski <bgolaszewski@baylibre.com>:

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

I noticed that oftentimes I use regmap_update_bits() for simple bit
setting or clearing. In this case the fourth argument is superfluous as
it's always 0 or equal to the mask argument.

This series proposes to add simple bit operations for setting, clearing
and testing specific bits with regmap.

The second patch uses all three in a driver that got recently picked into
the net-next tree.

The patches obviously target different trees so - if you're ok with
the change itself - I propose you pick the first one into your regmap
tree for v5.8 and then I'll resend the second patch to add the first
user for these macros for v5.9.

v1 -> v2:
- convert the new macros to static inline functions

v2 -> v3:
- drop unneeded ternary operator

Bartosz Golaszewski (2):
  regmap: provide helpers for simple bit operations
  net: ethernet: mtk-star-emac: use regmap bitops

 drivers/base/regmap/regmap.c                  | 22 +++++
 drivers/net/ethernet/mediatek/mtk_star_emac.c | 80 ++++++++-----------
 include/linux/regmap.h                        | 36 +++++++++
 3 files changed, 93 insertions(+), 45 deletions(-)

base-commit: 8f3d9f354286745c751374f5f1fcafee6b3f3136

--
2.26.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

In many instances regmap_update_bits() is used for simple bit setting
and clearing. In these cases the last argument is redundant and we can
hide it with a static inline function.

This adds three new helpers for simple bit operations: set_bits,
clear_bits and test_bits (the last one defined as a regular function).

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200528154503.26304-2-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>

This allows to access data with 16-bit width of registers
via i2c SMBus block functions.

The multi-command sequence of the reading function is not safe
and may read the wrong data from other address if other commands
are sent in-between the SMBus commands in the read function.

Read performance:
   32768 bytes (33 kB, 32 KiB) copied, 11.4869 s, 2.9 kB/s
Write performance(with 1-byte page):
   32768 bytes (33 kB, 32 KiB) copied, 129.591 s, 0.3 kB/s

The implementation is inspired by below commit
https://patchwork.ozlabs.org/patch/545292/

v2: add more descriptions about the issue that maybe introduced
    by this commit

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20200424123358.144850-1-acelan.kao@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>

The Kontron sl28cpld is a board management chip providing gpio, pwm, fan
monitoring and an interrupt controller. For now this controller is used on
the Kontron SMARC-sAL28 board. But because of its flexible nature, it
might also be used on other boards in the future. The individual blocks
(like gpio, pwm, etc) are kept intentionally small. The MFD core driver
then instantiates different (or multiple of the same) blocks. It also
provides the register layout so it might be updated in the future without a
device tree change; and support other boards with a different layout or
functionalities.

See also [1] for more information.

This is my first take of a MFD driver. I don't know whether the subsystem
maintainers should only be CCed on the patches which affect the subsystem
or on all patches for this series. I've chosen the latter so you can get a
more complete picture.

[1] https://lore.kernel.org/linux-devicetree/0e3e8204ab992d75aa07fc36af7e4ab2@walle.cc/

Changes since v1:
 - use of_match_table in all drivers, needed for automatic module loading,
   when using OF_MFD_CELL()
 - add new gpio-regmap.c which adds a generic regmap gpio_chip implemention
 - new patch for reqmap_irq, so we can reuse its implementation
 - remove almost any code from gpio-sl28cpld.c, instead use gpio-regmap and
   regmap-irq
 - change the handling of the mfd core vs device tree nodes; add a new
   property "of_reg" to the mfd_cell struct which, when set, is matched to
   the unit-address of the device tree nodes.
 - fix sl28cpld watchdog when it is not initialized by the bootloader.
   Explicitly set the operation mode.
 - also add support for kontron,assert-wdt-timeout-pin in sl28cpld-wdt.

As suggested by Bartosz Golaszewski:
 - define registers as hex
 - make gpio enum uppercase
 - move parent regmap check before memory allocation
 - use device_property_read_bool() instead of the of_ version
 - mention the gpio flavors in the bindings documentation

As suggested by Guenter Roeck:
 - cleanup #includes and sort them
 - use devm_watchdog_register_device()
 - use watchdog_stop_on_reboot()
 - provide a Documentation/hwmon/sl28cpld.rst
 - cleaned up the weird tristate->bool and I2C=y issue. Instead mention
   that the MFD driver is bool because of the following intc patch
 - removed the SL28CPLD_IRQ typo

As suggested by Rob Herring:
 - combine all dt bindings docs into one patch
 - change the node name for all gpio flavors to "gpio"
 - removed the interrupts-extended rule
 - cleaned up the unit-address space, see above

Michael Walle (16):
  include/linux/ioport.h: add helper to define REG resource constructs
  mfd: mfd-core: Don't overwrite the dma_mask of the child device
  mfd: mfd-core: match device tree node against reg property
  regmap-irq: make it possible to add irq_chip do a specific device node
  dt-bindings: mfd: Add bindings for sl28cpld
  mfd: Add support for Kontron sl28cpld management controller
  irqchip: add sl28cpld interrupt controller support
  watchdog: add support for sl28cpld watchdog
  pwm: add support for sl28cpld PWM controller
  gpio: add a reusable generic gpio_chip using regmap
  gpio: add support for the sl28cpld GPIO controller
  hwmon: add support for the sl28cpld hardware monitoring controller
  arm64: dts: freescale: sl28: enable sl28cpld
  arm64: dts: freescale: sl28: map GPIOs to input events
  arm64: dts: freescale: sl28: enable LED support
  arm64: dts: freescale: sl28: enable fan support

 .../bindings/gpio/kontron,sl28cpld-gpio.yaml  |  51 +++
 .../hwmon/kontron,sl28cpld-hwmon.yaml         |  27 ++
 .../bindings/mfd/kontron,sl28cpld.yaml        | 162 +++++++++
 .../bindings/pwm/kontron,sl28cpld-pwm.yaml    |  35 ++
 .../watchdog/kontron,sl28cpld-wdt.yaml        |  35 ++
 Documentation/hwmon/sl28cpld.rst              |  36 ++
 .../fsl-ls1028a-kontron-kbox-a-230-ls.dts     |  14 +
 .../fsl-ls1028a-kontron-sl28-var3-ads2.dts    |   9 +
 .../freescale/fsl-ls1028a-kontron-sl28.dts    | 124 +++++++
 drivers/base/regmap/regmap-irq.c              |  84 ++++-
 drivers/gpio/Kconfig                          |  15 +
 drivers/gpio/Makefile                         |   2 +
 drivers/gpio/gpio-regmap.c                    | 321 ++++++++++++++++++
 drivers/gpio/gpio-sl28cpld.c                  | 187 ++++++++++
 drivers/hwmon/Kconfig                         |  10 +
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/sl28cpld-hwmon.c                | 152 +++++++++
 drivers/irqchip/Kconfig                       |   3 +
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-sl28cpld.c                |  99 ++++++
 drivers/mfd/Kconfig                           |  21 ++
 drivers/mfd/Makefile                          |   2 +
 drivers/mfd/mfd-core.c                        |  31 +-
 drivers/mfd/sl28cpld.c                        | 154 +++++++++
 drivers/pwm/Kconfig                           |  10 +
 drivers/pwm/Makefile                          |   1 +
 drivers/pwm/pwm-sl28cpld.c                    | 204 +++++++++++
 drivers/watchdog/Kconfig                      |  11 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/sl28cpld_wdt.c               | 242 +++++++++++++
 include/linux/gpio-regmap.h                   |  88 +++++
 include/linux/ioport.h                        |   5 +
 include/linux/mfd/core.h                      |  26 +-
 include/linux/regmap.h                        |  10 +
 34 files changed, 2142 insertions(+), 32 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
 create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
 create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
 create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
 create mode 100644 Documentation/hwmon/sl28cpld.rst
 create mode 100644 drivers/gpio/gpio-regmap.c
 create mode 100644 drivers/gpio/gpio-sl28cpld.c
 create mode 100644 drivers/hwmon/sl28cpld-hwmon.c
 create mode 100644 drivers/irqchip/irq-sl28cpld.c
 create mode 100644 drivers/mfd/sl28cpld.c
 create mode 100644 drivers/pwm/pwm-sl28cpld.c
 create mode 100644 drivers/watchdog/sl28cpld_wdt.c
 create mode 100644 include/linux/gpio-regmap.h

--
2.20.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Add a new function regmap_add_irq_chip_np() with its corresponding
devm_regmap_add_irq_chip_np() variant. Sometimes one want to register
the IRQ domain on a different device node that the one of the regmap
node. For example when using a MFD where there are different interrupt
controllers and particularly for the generic regmap gpio_chip/irq_chip
driver. In this case it is not desireable to have the IRQ domain on
the parent node.

Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200402203656.27047-5-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>

Add reg_update_bits() support in case some platforms use a special method
to update bits of registers.

Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/df32fd0529957d1e7e26ba1465723f16cfbe92c8.1586757922.git.baolin.wang7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

When executing the following command, we met kernel dump.
dmesg -c > /dev/null; cd /sys;
for i in `ls /sys/kernel/debug/regmap/* -d`; do
	echo "Checking regmap in $i";
	cat $i/registers;
done && grep -ri "0x02d0" *;

It is because the count value is too big, and kmalloc fails. So add an
upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

When checking if a register block is writable we must ensure that the
block does not start with or contain a non incrementing register.

Fixes: 8b9f9d4dc511 ("regmap: verify if register is writeable before writing operations")
Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Link: https://lore.kernel.org/r/20200118205625.14532-1-ben.whitten@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

regmap_bus structures are not changed anywhere. Mark them const.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/85e4141348db00ecf1f2bc5c2ff6ba3de75e8ff4.1578134920.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>