linux.git/drivers/base/power, branch v4.4-rc2

Merge branch 'pm-sleep'

2015-11-20T00:22:33+00:00

* pm-sleep:
  PM / wakeirq: check that wake IRQ is valid before accepting it

PM / wakeirq: check that wake IRQ is valid before accepting it

2015-11-16T22:10:20+00:00

Check that IRQ number passed to dev_pm_set_wake_irq() and
dev_pm_set_dedicated_wake_irq() is valid (not negative) before
accepting it.

Signed-off-by: Dmitry Torokhov 
Signed-off-by: Rafael J. Wysocki

Merge tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2015-11-12T19:50:33+00:00

Pull more power management and ACPI updates from Rafael Wysocki:
 "The only new feature in this batch is support for the ACPI _CCA device
  configuration object, which it a pre-requisite for future ACPI PCI
  support on ARM64, but should not affect the other architectures.

  The rest is fixes and cleanups, mostly in cpufreq (including
  intel_pstate), the Operating Performace Points (OPP) framework and
  tools (cpupower and turbostat).

  Specifics:

   - Support for the ACPI _CCA configuration object intended to tell the
     OS whether or not a bus master device supports hardware managed
     cache coherency and a new set of functions to allow drivers to
     check the cache coherency support for devices in a platform
     firmware interface agnostic way (Suravee Suthikulpanit, Jeremy
     Linton).

   - ACPI backlight quirks for ESPRIMO Mobile M9410 and Dell XPS L421X
     (Aaron Lu, Hans de Goede).

   - Fixes for the arm_big_little and s5pv210-cpufreq cpufreq drivers
     (Jon Medhurst, Nicolas Pitre).

   - kfree()-related fixup for the recently introduced CPPC cpufreq
     frontend (Markus Elfring).

   - intel_pstate fix reducing kernel log noise on systems where
     P-states are managed by hardware (Prarit Bhargava).

   - intel_pstate maintainers information update (Srinivas Pandruvada).

   - cpufreq core optimization related to the handling of delayed work
     items used by governors (Viresh Kumar).

   - Locking fixes and cleanups of the Operating Performance Points
     (OPP) framework (Viresh Kumar).

   - Generic power domains framework cleanups (Lina Iyer).

   - cpupower tool updates (Jacob Tanenbaum, Sriram Raghunathan, Thomas
     Renninger).

   - turbostat tool updates (Len Brown)"

* tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  PCI: ACPI: Add support for PCI device DMA coherency
  PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
  of/pci: Fix pci_get_host_bridge_device leak
  device property: ACPI: Remove unused DMA APIs
  device property: ACPI: Make use of the new DMA Attribute APIs
  device property: Adding DMA Attribute APIs for Generic Devices
  ACPI: Adding DMA Attribute APIs for ACPI Device
  device property: Introducing enum dev_dma_attr
  ACPI: Honor ACPI _CCA attribute setting
  cpufreq: CPPC: Delete an unnecessary check before the function call kfree()
  PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp()
  PM / OPP: Hold dev_opp_list_lock for writers
  PM / OPP: Protect updates to list_dev with mutex
  PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus()
  cpufreq: s5pv210-cpufreq: fix wrong do_div() usage
  MAINTAINERS: update for intel P-state driver
  Creating a common structure initialization pattern for struct option
  cpupower: Enable disabled Cstates if they are below max latency
  cpupower: Remove debug message when using cpupower idle-set -D switch
  cpupower: cpupower monitor reports uninitialized values for offline cpus
  ...

Merge branch 'pm-domains'

2015-11-11T23:22:50+00:00

* pm-domains:
  PM / Domains: Allocate memory outside domain locks
  PM / Domains: Remove dev->driver check for runtime PM

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

2015-11-11T17:03:01+00:00

Pull thermal updates from Zhang Rui:

 - Implement generic devfreq cooling mechanism through frequency
   reduction for devices using devfreq.  From Ørjan Eide and Javi
   Merino.

 - Introduce OMAP3 support on TI SoC thermal driver.  From Pavel Mack
   and Eduardo Valentin.

 - A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and
   Rockchip thermal drivers.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits)
  thermal: exynos: Directly return 0 instead of using local ret variable
  thermal: exynos: Remove unneeded semicolon
  thermal: exynos: Use IS_ERR() because regulator cannot be NULL
  thermal: exynos: Fix first temperature read after registering sensor
  thermal: exynos: Fix unbalanced regulator disable on probe failure
  devfreq_cooling: return on allocation failure
  thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r
  dt-bindings: rockchip-thermal: Add the pinctrl states in this document
  thermal: devfreq_cooling: Make power a u64
  thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister
  thermal: underflow bug in imx_set_trip_temp()
  thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula
  thermal: imx: register irq handler later in probe
  thermal: rockhip: fix setting thermal shutdown polarity
  thermal: rockchip: fix handling of invalid readings
  devfreq_cooling: add trace information
  thermal: Add devfreq cooling
  PM / OPP: get the voltage for all OPPs
  tools/thermal: tmon: use pkg-config also for CFLAGS
  linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS
  ...

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-11-10T23:00:03+00:00

Pull ARM SoC driver updates from Olof Johansson:
 "As we've enabled multiplatform kernels on ARM, and greatly done away
  with the contents under arch/arm/mach-*, there's still need for
  SoC-related drivers to go somewhere.

  Many of them go in through other driver trees, but we still have
  drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
  that might be shared between ARM and ARM64 (or just in general makes
  sense to not have under the architecture directory).

  This branch contains mostly such code:

   - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
     communicate with power management blocks on these SoCs for use by
     clock, regulator and bus frequency drivers.

   - Allwinner Reduced Serial Bus driver, again used to communicate with
     PMICs.

   - Drivers for ARM's SCPI (System Control Processor).  Not to be
     confused with PSCI (Power State Coordination Interface).  SCPI is
     used to communicate with the assistant embedded cores doing power
     management, and we have yet to see how many of them will implement
     this for their hardware vs abstracting in other ways (or not at all
     like in the past).

   - To make confusion between SCPI and PSCI more likely, this release
     also includes an update of PSCI to interface version 1.0.

   - Rockchip support for power domains.

   - A driver to talk to the firmware on Raspberry Pi"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  soc: qcom: smd-rpm: Correct size of outgoing message
  bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
  bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
  ARM: bcm2835: add mutual inclusion protection
  drivers: psci: make PSCI 1.0 functions initialization version dependent
  dt-bindings: Correct paths in Rockchip power domains binding document
  soc: rockchip: power-domain: don't try to print the clock name in error case
  soc: qcom/smem: add HWSPINLOCK dependency
  clk: berlin: add cpuclk
  ARM: berlin: dts: add CLKID_CPU for BG2Q
  ARM: bcm2835: Add the Raspberry Pi firmware driver
  soc: qcom: smem: Move RPM message ram out of smem DT node
  soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  soc: qcom: smd: delete unneeded of_node_put
  firmware: qcom-scm: build for correct architecture level
  soc: qcom: smd: Correct SMEM items for upper channels
  qcom-scm: add missing prototype for qcom_scm_is_available()
  qcom-scm: fix endianess issue in __qcom_scm_is_call_available
  soc: qcom: smd: Reject send of too big packets
  soc: qcom: smd: Handle big endian CPUs
  ...

Merge branch 'pm-opp'

2015-11-07T00:30:40+00:00

* pm-opp:
  PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp()
  PM / OPP: Hold dev_opp_list_lock for writers
  PM / OPP: Protect updates to list_dev with mutex
  PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus()
  PM / OPP: Parse all power-supply related bindings together
  PM / OPP: Rename routines specific to old bindings with _v1
  PM / OPP: Improve print messages with pr_fmt

PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp()

2015-11-06T22:59:42+00:00

_find_device_opp() should be called with rcu-read lock or
dev_opp_list_lock held. Add the opp_rcu_lockdep_assert() check to make
sure caller have taken appropriate locks.

Fix comment over the routine as well.

Suggested-by: Stephen Boyd 
Signed-off-by: Viresh Kumar 
Signed-off-by: Rafael J. Wysocki

PM / OPP: Hold dev_opp_list_lock for writers

2015-11-06T22:59:41+00:00

Writers need to update OPP device and their list with dev_opp_list_lock
mutex held, which was missed at few places. Fix it.

Signed-off-by: Viresh Kumar 
Cc: 4.3  # 4.3
Signed-off-by: Rafael J. Wysocki

PM / OPP: Protect updates to list_dev with mutex

2015-11-06T22:59:41+00:00

dev_opp_list_lock is used everywhere to protect device and OPP lists,
but dev_pm_opp_set_sharing_cpus() is missed somehow. And instead we used
rcu-lock, which wouldn't help here as we are adding a new list_dev.

This also fixes a problem where we have called kzalloc(..., GFP_KERNEL)
from within rcu-lock, which isn't allowed as kzalloc can sleep when
called with GFP_KERNEL.

With CONFIG_DEBUG_ATOMIC_SLEEP set, we get following lockdep-splat:

include/linux/rcupdate.h:578 Illegal context switch in RCU read-side critical section!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
5 locks held by swapper/0/1:
 #0:  (&dev->mutex){......}, at: [] __driver_attach+0x48/0x98
 #1:  (&dev->mutex){......}, at: [] __driver_attach+0x58/0x98
 #2:  (cpu_hotplug.lock){++++++}, at: [] get_online_cpus+0x40/0xb0
 #3:  (subsys mutex#5){+.+.+.}, at: [] subsys_interface_register+0x44/0xdc
 #4:  (rcu_read_lock){......}, at: [] dev_pm_opp_set_sharing_cpus+0x0/0x1e4

stack backtrace:
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W       4.3.0-rc7-00047-g81f5932958a8 #59
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x94/0xbc)
[] (dump_stack) from [] (___might_sleep+0x24c/0x298)
[] (___might_sleep) from [] (kmem_cache_alloc+0xe8/0x164)
[] (kmem_cache_alloc) from [] (_add_list_dev+0x30/0x58)
[] (_add_list_dev) from [] (dev_pm_opp_set_sharing_cpus+0xd0/0x1e4)
[] (dev_pm_opp_set_sharing_cpus) from [] (cpufreq_init+0x4cc/0x62c)
[] (cpufreq_init) from [] (cpufreq_online+0xbc/0x73c)
[] (cpufreq_online) from [] (subsys_interface_register+0x98/0xdc)
[] (subsys_interface_register) from [] (cpufreq_register_driver+0x110/0x17c)
[] (cpufreq_register_driver) from [] (dt_cpufreq_probe+0x60/0x8c)
[] (dt_cpufreq_probe) from [] (platform_drv_probe+0x44/0xa4)
[] (platform_drv_probe) from [] (driver_probe_device+0x208/0x2f4)
[] (driver_probe_device) from [] (__driver_attach+0x94/0x98)
[] (__driver_attach) from [] (bus_for_each_dev+0x68/0x9c)

Reported-by: Michael Turquette 
Reviewed-by: Stephen Boyd 
Signed-off-by: Viresh Kumar 
Cc: 4.3  # 4.3
Signed-off-by: Rafael J. Wysocki