linux.git/drivers/base/power/main.c, branch v4.13

Merge branch 'acpi-pm'

2017-07-03T12:23:09+00:00

* acpi-pm:
  PM / core: Drop run_wake flag from struct dev_pm_info
  PCI / PM: Simplify device wakeup settings code
  PCI / PM: Drop pme_interrupt flag from struct pci_dev
  ACPI / PM: Consolidate device wakeup settings code
  ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags
  ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems
  platform: x86: intel-hid: Wake up the system from suspend-to-idle
  platform: x86: intel-vbtn: Wake up the system from suspend-to-idle
  ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle
  platform/x86: Add driver for ACPI INT0002 Virtual GPIO device
  PCI / PM: Restore PME Enable if skipping wakeup setup
  PM / sleep: Print timing information if debug is enabled
  ACPI / PM: Clean up device wakeup enable/disable code
  ACPI / PM: Change log level of wakeup-related message
  USB / PCI / PM: Allow the PCI core to do the resume cleanup
  ACPI / PM: Run wakeup notify handlers synchronously

Conflicts:
	drivers/base/power/main.c

PM: Constify info string used in messages

2017-06-27T22:27:14+00:00

The 'info' string appearing in many places points to a .rodata string so
it should be passes as pointer to const.

Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Rafael J. Wysocki

PM: Constify returned PM event name

2017-06-27T22:27:14+00:00

The pm_verb() returns a pointer to string from .rodata so it should be
marked as const.

Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Rafael J. Wysocki

ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle

2017-06-14T22:55:44+00:00

The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ
during suspend-to-idle transitions and, consequently, any events
signaled through it wake up the system from that state.  However,
on some systems some of the events signaled via the ACPI SCI while
suspended to idle should not cause the system to wake up.  In fact,
quite often they should just be discarded.

Arguably, systems should not resume entirely on such events, but in
order to decide which events really should cause the system to resume
and which are spurious, it is necessary to resume up to the point
when ACPI SCIs are actually handled and processed, which is after
executing dpm_resume_noirq() in the system resume path.

For this reasons, add a loop around freeze_enter() in which the
platforms can process events signaled via multiplexed IRQ lines
like the ACPI SCI and add suspend-to-idle hooks that can be
used for this purpose to struct platform_freeze_ops.

In the ACPI case, the ->wake hook is used for checking if the SCI
has triggered while suspended and deferring the interrupt-induced
system wakeup until the events signaled through it are actually
processed sufficiently to decide whether or not the system should
resume.  In turn, the ->sync hook allows all of the relevant event
queues to be flushed so as to prevent events from being missed due
to race conditions.

In addition to that, some ACPI code processing wakeup events needs
to be modified to use the "hard" version of wakeup triggers, so that
it will cause a system resume to happen on device-induced wakeup
events even if the "soft" mechanism to prevent the system from
suspending is not enabled.  However, to preserve the existing
behavior with respect to suspend-to-RAM, this only is done in
the suspend-to-idle case and only if an SCI has occurred while
suspended.

Signed-off-by: Rafael J. Wysocki

PM / sleep: Print timing information if debug is enabled

2017-06-14T22:55:43+00:00

Avoid printing the device suspend/resume timing information if
CONFIG_PM_DEBUG is not set to reduce the log noise level.

Signed-off-by: Rafael J. Wysocki

Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"

2017-06-06T22:57:37+00:00

Revert commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups
from suspend-to-idle) as it turned out to be premature and triggered
a number of different issues on various systems.

That includes, but is not limited to, premature suspend-to-RAM aborts
on Dell XPS 13 (9343) reported by Dominik.

The issue the commit in question attempted to address is real and
will need to be taken care of going forward, but evidently more work
is needed for this purpose.

Reported-by: Dominik Brodowski 
Signed-off-by: Rafael J. Wysocki

ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle

2017-05-05T20:54:28+00:00

The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ
during suspend-to-idle transitions and, consequently, any events
signaled through it wake up the system from that state.  However,
on some systems some of the events signaled via the ACPI SCI while
suspended to idle should not cause the system to wake up.  In fact,
quite often they should just be discarded.

Arguably, systems should not resume entirely on such events, but in
order to decide which events really should cause the system to resume
and which are spurious, it is necessary to resume up to the point
when ACPI SCIs are actually handled and processed, which is after
executing dpm_resume_noirq() in the system resume path.

For this reasons, add a loop around freeze_enter() in which the
platforms can process events signaled via multiplexed IRQ lines
like the ACPI SCI and add suspend-to-idle hooks that can be
used for this purpose to struct platform_freeze_ops.

In the ACPI case, the ->wake hook is used for checking if the SCI
has triggered while suspended and deferring the interrupt-induced
system wakeup until the events signaled through it are actually
processed sufficiently to decide whether or not the system should
resume.  In turn, the ->sync hook allows all of the relevant event
queues to be flushed so as to prevent events from being missed due
to race conditions.

In addition to that, some ACPI code processing wakeup events needs
to be modified to use the "hard" version of wakeup triggers, so that
it will cause a system resume to happen on device-induced wakeup
events even if the "soft" mechanism to prevent the system from
suspending is not enabled (that also helps to catch device-induced
wakeup events occurring during suspend transitions in progress).

Signed-off-by: Rafael J. Wysocki

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:34+00:00

We are going to split  out of , which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder  file that just
maps to  to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

ktime: Cleanup ktime_set() usage

2016-12-25T16:21:22+00:00

ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.

Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra

Merge tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2016-12-13T19:42:18+00:00

Pull driver core updates from Greg KH:
 "Here's the new driver core patches for 4.10-rc1.

  Big thing here is the nice addition of "functional dependencies" to
  the driver core. The idea has been talked about for a very long time,
  great job to Rafael for stepping up and implementing it. It's been
  tested for longer than the 4.9-rc1 date, we held off on merging it
  earlier in order to feel more comfortable about it.

  Other than that, it's just a handful of small other patches, some good
  cleanups to the mess that is the firmware class code, and we have a
  test driver for the deferred probe logic.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits)
  firmware: Correct handling of fw_state_wait() return value
  driver core: Silence device links sphinx warning
  firmware: remove warning at documentation generation time
  drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments
  driver core: test_async: fix up typo found by 0-day
  firmware: move fw_state_is_done() into UHM section
  firmware: do not use fw_lock for fw_state protection
  firmware: drop bit ops in favor of simple state machine
  firmware: refactor loading status
  firmware: fix usermode helper fallback loading
  driver core: firmware_class: convert to use class_groups
  driver core: devcoredump: convert to use class_groups
  driver core: class: add class_groups support
  kernfs: Declare two local data structures static
  driver-core: fix platform_no_drv_owner.cocci warnings
  drivers/base/memory.c: Remove unused 'first_page' variable
  driver core: add CLASS_ATTR_WO()
  drivers: base: cacheinfo: support DT overrides for cache properties
  drivers: base: cacheinfo: add pr_fmt logging
  drivers: base: cacheinfo: fix boot error message when acpi is enabled
  ...