linux.git/drivers/base/firmware_class.c, branch v4.13-rc2 Linux kernel source tree firmware: move umh try locks into the umh code 2017-06-03T10:15:50+00:00 Luis R. Rodriguez mcgrof@kernel.org 2017-05-02T08:31:07+00:00 06a45a93e7d34aab34522cc49479e1caecf3298c This moves the usermode helper locks into only code paths that use the usermode helper API from the kernel. The usermode helper locks were originally added to prevent stalling suspend, later the firmware cache was added to help with this, and further later direct filesystem lookup was added by Linus to completely bypass udev due to the amount of issues the umh approach had. The usermode helper locks were kept even when the direct filesystem lookup mechanism is used though. A lot has changed since the original usermode helper locks were added but the recent commit which added the code for firmware_enabled() are intended to address any possible races cured only as collateral by using the locks as though side consequence of code evolution and this not being addressed any time sooner. With the firmware_enabled() code in place we are a bit more sure to move the usermode helper locks to UMH only code. There is a bit of history here so let's recap a bit of it to ensure nothing is lost and things are clear. The direct filesystem approach to loading firmware is rather new, it was added via commit abb139e75c2cdb ("firmware: teach the kernel to load firmware files directly from the filesystem") by Linus merged on the v3.7 release, to enable to bypass udev. usermodehelper_read_lock_wait() was added earlier via commit 9b78c1da60b3c ("firmware_class: Do not warn that system is not ready from async loads") merged on v3.4, after Rafael noted that the async firmware API call request_firmware_nowait() should not be penalized to fail if userspace is not available yet or frozen, it'd allow for a timeout grace period before giving up. The WARN_ON() was kept for the sync firmware API call though on request_firmware(). At this time there was no direct filesystem lookup for firmware though. The original usermode helper lock came from commit a144c6a6c924a ("PM: Print a warning if firmware is requested when tasks are frozen") merged on the v3.0 kernel by Rafael to print a warning back when firmware requests were used on resume(), thaw() or restore() callbacks and there was no direct fs lookups or the firmware cache. Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This moves the usermode helper locks into only code paths that use the
usermode helper API from the kernel. The usermode helper locks were
originally added to prevent stalling suspend, later the firmware cache
was added to help with this, and further later direct filesystem lookup
was added by Linus to completely bypass udev due to the amount of issues
the umh approach had.

The usermode helper locks were kept even when the direct filesystem lookup
mechanism is used though. A lot has changed since the original usermode
helper locks were added but the recent commit which added the code for
firmware_enabled() are intended to address any possible races cured only
as collateral by using the locks as though side consequence of code
evolution and this not being addressed any time sooner. With the
firmware_enabled() code in place we are a bit more sure to move the
usermode helper locks to UMH only code.

There is a bit of history here so let's recap a bit of it to ensure nothing
is lost and things are clear. The direct filesystem approach to loading
firmware is rather new, it was added via commit abb139e75c2cdb ("firmware:
teach the kernel to load firmware files directly from the filesystem") by
Linus merged on the v3.7 release, to enable to bypass udev.

usermodehelper_read_lock_wait() was added earlier via commit 9b78c1da60b3c
("firmware_class: Do not warn that system is not ready from async loads")
merged on v3.4, after Rafael noted that the async firmware API call
request_firmware_nowait() should not be penalized to fail if userspace is
not available yet or frozen, it'd allow for a timeout grace period before
giving up. The WARN_ON() was kept for the sync firmware API call though on
request_firmware(). At this time there was no direct filesystem lookup for
firmware though.

The original usermode helper lock came from commit a144c6a6c924a ("PM:
Print a warning if firmware is requested when tasks are frozen") merged on
the v3.0 kernel by Rafael to print a warning back when firmware requests
were used on resume(), thaw() or restore() callbacks and there was no
direct fs lookups or the firmware cache.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: move assign_firmware_buf() further up 2017-06-03T10:15:50+00:00 Luis R. Rodriguez mcgrof@kernel.org 2017-05-02T08:31:06+00:00 8509adcaa9286636ef8ec874ed9ffd9717afe545 This will make subsequent changes easier to read. Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This will make subsequent changes easier to read.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: add sanity check on shutdown/suspend 2017-06-03T10:15:49+00:00 Luis R. Rodriguez mcgrof@kernel.org 2017-05-02T08:31:05+00:00 81f95076281fdd3bc382e004ba1bce8e82fccbce The firmware API should not be used after we go to suspend and after we reboot/halt. The suspend/resume case is a bit complex, so this documents that so things are clearer. We want to know about users of the API in incorrect places so that their callers are corrected, so this also adds a warn for those cases. Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The firmware API should not be used after we go to suspend
and after we reboot/halt. The suspend/resume case is a bit
complex, so this documents that so things are clearer.

We want to know about users of the API in incorrect places so
that their callers are corrected, so this also adds a warn
for those cases.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: always enable the reboot notifier 2017-06-03T10:15:49+00:00 Luis R. Rodriguez mcgrof@kernel.org 2017-05-02T08:31:04+00:00 a669f04ab4b4d7e5a7ac8250f0b688a07e10b04c Now that we've have proper wrappers for the fallback mechanism we can easily share the reboot notifier for the firmware_class at all times. This change will make subsequent modifications to the reboot notifier easier to review. Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Now that we've have proper wrappers for the fallback mechanism
we can easily share the reboot notifier for the firmware_class
at all times.

This change will make subsequent modifications to the reboot
notifier easier to review.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: share fw fallback killing on reboot/suspend 2017-06-03T10:15:49+00:00 Luis R. Rodriguez mcgrof@kernel.org 2017-05-02T08:31:03+00:00 c4b768934be613fb882e4e4090946218d76c8e1b We kill pending fallback requests on suspend and reboot, the only difference is that on suspend we only kill custom fallback requests. Provide a wrapper that lets us customize the request with a flag. This also lets us simplify the #ifdef'ery over the calls. Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We kill pending fallback requests on suspend and reboot,
the only difference is that on suspend we only kill custom
fallback requests. Provide a wrapper that lets us customize
the request with a flag.

This also lets us simplify the #ifdef'ery over the calls.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: move kill_requests_without_uevent() up above 2017-06-03T10:15:49+00:00 Luis R. Rodriguez mcgrof@kernel.org 2017-05-02T08:31:02+00:00 6383331d8f390da68e5cb3e9184b5c99429c4545 This routine will used in functions declared earlier next. This code shift has no functional changes, it will make subsequent changes easier to read. Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This routine will used in functions declared earlier next. This
code shift has no functional changes, it will make subsequent
changes easier to read.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: fix NULL pointer dereference in __fw_load_abort() 2017-01-27T08:19:48+00:00 Luis R. Rodriguez mcgrof@kernel.org 2017-01-25T18:31:52+00:00 191e885a2e130e639bb0c8ee350d7047294f2ce6 Since commit 5d47ec02c37ea6 ("firmware: Correct handling of fw_state_wait() return value") fw_load_abort() could be called twice and lead us to a kernel crash. This happens only when the firmware fallback mechanism (regular or custom) is used. The fallback mechanism exposes a sysfs interface for userspace to upload a file and notify the kernel when the file is loaded and ready, or to cancel an upload by echo'ing -1 into on the loading file: echo -n "-1" > /sys/$DEVPATH/loading This will call fw_load_abort(). Some distributions actually have a udev rule in place to *always* immediately cancel all firmware fallback mechanism requests (Debian), they have: $ cat /lib/udev/rules.d/50-firmware.rules # stub for immediately telling the kernel that userspace firmware loading # failed; necessary to avoid long timeouts with CONFIG_FW_LOADER_USER_HELPER=y SUBSYSTEM=="firmware", ACTION=="add", ATTR{loading}="-1 Distributions with this udev rule would run into this crash only if the fallback mechanism is used. Since most distributions disable by default using the fallback mechanism (CONFIG_FW_LOADER_USER_HELPER_FALLBACK), this would typicaly mean only 2 drivers which *require* the fallback mechanism could typically incur a crash: drivers/firmware/dell_rbu.c and the drivers/leds/leds-lp55xx-common.c driver. Distributions enabling CONFIG_FW_LOADER_USER_HELPER_FALLBACK by default are obviously more exposed to this crash. The crash happens because after commit 5b029624948d ("firmware: do not use fw_lock for fw_state protection") and subsequent fix commit 5d47ec02c37ea6 ("firmware: Correct handling of fw_state_wait() return value") a race can happen between this cancelation and the firmware fw_state_wait_timeout() being woken up after a state change with which fw_load_abort() as that calls swake_up(). Upon error fw_state_wait_timeout() will also again call fw_load_abort() and trigger a null reference. At first glance we could just fix this with a !buf check on fw_load_abort() before accessing buf->fw_st, however there is a logical issue in having a state machine used for the fallback mechanism and preventing access from it once we abort as its inside the buf (buf->fw_st). The firmware_class.c code is setting the buf to NULL to annotate an abort has occurred. Replace this mechanism by simply using the state check instead. All the other code in place already uses similar checks for aborting as well so no further changes are needed. An oops can be reproduced with the new fw_fallback.sh fallback mechanism cancellation test. Either cancelling the fallback mechanism or the custom fallback mechanism triggers a crash. mcgrof@piggy ~/linux-next/tools/testing/selftests/firmware (git::20170111-fw-fixes)$ sudo ./fw_fallback.sh ./fw_fallback.sh: timeout works ./fw_fallback.sh: firmware comparison works ./fw_fallback.sh: fallback mechanism works [ this then sits here when it is trying the cancellation test ] Kernel log: test_firmware: loading 'nope-test-firmware.bin' misc test_firmware: Direct firmware load for nope-test-firmware.bin failed with error -2 misc test_firmware: Falling back to user helper BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: _request_firmware+0xa27/0xad0 PGD 0 Oops: 0000 [#1] SMP Modules linked in: test_firmware(E) ... etc ... CPU: 1 PID: 1396 Comm: fw_fallback.sh Tainted: G W E 4.10.0-rc3-next-20170111+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 task: ffff9740b27f4340 task.stack: ffffbb15c0bc8000 RIP: 0010:_request_firmware+0xa27/0xad0 RSP: 0018:ffffbb15c0bcbd10 EFLAGS: 00010246 RAX: 00000000fffffffe RBX: ffff9740afe5aa80 RCX: 0000000000000000 RDX: ffff9740b27f4340 RSI: 0000000000000283 RDI: 0000000000000000 RBP: ffffbb15c0bcbd90 R08: ffffbb15c0bcbcd8 R09: 0000000000000000 R10: 0000000894a0d4b1 R11: 000000000000008c R12: ffffffffc0312480 R13: 0000000000000005 R14: ffff9740b1c32400 R15: 00000000000003e8 FS: 00007f8604422700(0000) GS:ffff9740bfc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 000000012164c000 CR4: 00000000000006e0 Call Trace: request_firmware+0x37/0x50 trigger_request_store+0x79/0xd0 [test_firmware] dev_attr_store+0x18/0x30 sysfs_kf_write+0x37/0x40 kernfs_fop_write+0x110/0x1a0 __vfs_write+0x37/0x160 ? _cond_resched+0x1a/0x50 vfs_write+0xb5/0x1a0 SyS_write+0x55/0xc0 ? trace_do_page_fault+0x37/0xd0 entry_SYSCALL_64_fastpath+0x1e/0xad RIP: 0033:0x7f8603f49620 RSP: 002b:00007fff6287b788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000055c307b110a0 RCX: 00007f8603f49620 RDX: 0000000000000016 RSI: 000055c3084d8a90 RDI: 0000000000000001 RBP: 0000000000000016 R08: 000000000000c0ff R09: 000055c3084d6336 R10: 000055c307b108b0 R11: 0000000000000246 R12: 000055c307b13c80 R13: 000055c3084d6320 R14: 0000000000000000 R15: 00007fff6287b950 Code: 9f 64 84 e8 9c 61 fe ff b8 f4 ff ff ff e9 6b f9 ff ff 48 c7 c7 40 6b 8d 84 89 45 a8 e8 43 84 18 00 49 8b be 00 03 00 00 8b 45 a8 <83> 7f 38 02 74 08 e8 6e ec ff ff 8b 45 a8 49 c7 86 00 03 00 00 RIP: _request_firmware+0xa27/0xad0 RSP: ffffbb15c0bcbd10 CR2: 0000000000000038 ---[ end trace 6d94ac339c133e6f ]--- Fixes: 5d47ec02c37e ("firmware: Correct handling of fw_state_wait() return value") Reported-and-Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reported-and-Tested-by: Patrick Bruenn <p.bruenn@beckhoff.com> Reported-by: Chris Wilson <chris@chris-wilson.co.uk> CC: <stable@vger.kernel.org> [3.10+] Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Since commit 5d47ec02c37ea6 ("firmware: Correct handling of
fw_state_wait() return value") fw_load_abort() could be called twice and
lead us to a kernel crash. This happens only when the firmware fallback
mechanism (regular or custom) is used. The fallback mechanism exposes a
sysfs interface for userspace to upload a file and notify the kernel
when the file is loaded and ready, or to cancel an upload by echo'ing -1
into on the loading file:

echo -n "-1" > /sys/$DEVPATH/loading

This will call fw_load_abort(). Some distributions actually have a udev
rule in place to *always* immediately cancel all firmware fallback
mechanism requests (Debian), they have:

  $ cat /lib/udev/rules.d/50-firmware.rules
  # stub for immediately telling the kernel that userspace firmware loading
  # failed; necessary to avoid long timeouts with CONFIG_FW_LOADER_USER_HELPER=y
  SUBSYSTEM=="firmware", ACTION=="add", ATTR{loading}="-1

Distributions with this udev rule would run into this crash only if the
fallback mechanism is used. Since most distributions disable by default
using the fallback mechanism (CONFIG_FW_LOADER_USER_HELPER_FALLBACK),
this would typicaly mean only 2 drivers which *require* the fallback
mechanism could typically incur a crash: drivers/firmware/dell_rbu.c and
the drivers/leds/leds-lp55xx-common.c driver. Distributions enabling
CONFIG_FW_LOADER_USER_HELPER_FALLBACK by default are obviously more
exposed to this crash.

The crash happens because after commit 5b029624948d ("firmware: do not
use fw_lock for fw_state protection") and subsequent fix commit
5d47ec02c37ea6 ("firmware: Correct handling of fw_state_wait() return
value") a race can happen between this cancelation and the firmware
fw_state_wait_timeout() being woken up after a state change with which
fw_load_abort() as that calls swake_up(). Upon error
fw_state_wait_timeout() will also again call fw_load_abort() and trigger
a null reference.

At first glance we could just fix this with a !buf check on
fw_load_abort() before accessing buf->fw_st, however there is a logical
issue in having a state machine used for the fallback mechanism and
preventing access from it once we abort as its inside the buf
(buf->fw_st).

The firmware_class.c code is setting the buf to NULL to annotate an
abort has occurred. Replace this mechanism by simply using the state
check instead. All the other code in place already uses similar checks
for aborting as well so no further changes are needed.

An oops can be reproduced with the new fw_fallback.sh fallback mechanism
cancellation test. Either cancelling the fallback mechanism or the
custom fallback mechanism triggers a crash.

mcgrof@piggy ~/linux-next/tools/testing/selftests/firmware
(git::20170111-fw-fixes)$ sudo ./fw_fallback.sh

./fw_fallback.sh: timeout works
./fw_fallback.sh: firmware comparison works
./fw_fallback.sh: fallback mechanism works

[ this then sits here when it is trying the cancellation test ]

Kernel log:

test_firmware: loading 'nope-test-firmware.bin'
misc test_firmware: Direct firmware load for nope-test-firmware.bin failed with error -2
misc test_firmware: Falling back to user helper
BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
IP: _request_firmware+0xa27/0xad0
PGD 0

Oops: 0000 [#1] SMP
Modules linked in: test_firmware(E) ... etc ...
CPU: 1 PID: 1396 Comm: fw_fallback.sh Tainted: G        W E   4.10.0-rc3-next-20170111+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
task: ffff9740b27f4340 task.stack: ffffbb15c0bc8000
RIP: 0010:_request_firmware+0xa27/0xad0
RSP: 0018:ffffbb15c0bcbd10 EFLAGS: 00010246
RAX: 00000000fffffffe RBX: ffff9740afe5aa80 RCX: 0000000000000000
RDX: ffff9740b27f4340 RSI: 0000000000000283 RDI: 0000000000000000
RBP: ffffbb15c0bcbd90 R08: ffffbb15c0bcbcd8 R09: 0000000000000000
R10: 0000000894a0d4b1 R11: 000000000000008c R12: ffffffffc0312480
R13: 0000000000000005 R14: ffff9740b1c32400 R15: 00000000000003e8
FS:  00007f8604422700(0000) GS:ffff9740bfc80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 000000012164c000 CR4: 00000000000006e0
Call Trace:
 request_firmware+0x37/0x50
 trigger_request_store+0x79/0xd0 [test_firmware]
 dev_attr_store+0x18/0x30
 sysfs_kf_write+0x37/0x40
 kernfs_fop_write+0x110/0x1a0
 __vfs_write+0x37/0x160
 ? _cond_resched+0x1a/0x50
 vfs_write+0xb5/0x1a0
 SyS_write+0x55/0xc0
 ? trace_do_page_fault+0x37/0xd0
 entry_SYSCALL_64_fastpath+0x1e/0xad
RIP: 0033:0x7f8603f49620
RSP: 002b:00007fff6287b788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055c307b110a0 RCX: 00007f8603f49620
RDX: 0000000000000016 RSI: 000055c3084d8a90 RDI: 0000000000000001
RBP: 0000000000000016 R08: 000000000000c0ff R09: 000055c3084d6336
R10: 000055c307b108b0 R11: 0000000000000246 R12: 000055c307b13c80
R13: 000055c3084d6320 R14: 0000000000000000 R15: 00007fff6287b950
Code: 9f 64 84 e8 9c 61 fe ff b8 f4 ff ff ff e9 6b f9 ff
ff 48 c7 c7 40 6b 8d 84 89 45 a8 e8 43 84 18 00 49 8b be 00 03 00 00 8b
45 a8 <83> 7f 38 02 74 08 e8 6e ec ff ff 8b 45 a8 49 c7 86 00 03 00 00
RIP: _request_firmware+0xa27/0xad0 RSP: ffffbb15c0bcbd10
CR2: 0000000000000038
---[ end trace 6d94ac339c133e6f ]---

Fixes: 5d47ec02c37e ("firmware: Correct handling of fw_state_wait() return value")
Reported-and-Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reported-and-Tested-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
CC: <stable@vger.kernel.org>    [3.10+]
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: Correct handling of fw_state_wait() return value 2016-12-08T20:05:54+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2016-12-07T01:01:45+00:00 5d47ec02c37ea632398cb251c884e3a488dff794 When request_firmware() finds an already open firmware object it will wait for that object to become fully loaded and then check the status. As __fw_state_wait_common() succeeds the timeout value returned will be truncated in _request_firmware_prepare() and interpreted as -EPERM. Prior to "firmware: do not use fw_lock for fw_state protection" the code did test if we where in the "done" state before sleeping, causing this particular code path to succeed, in some cases. As the callers are interested in the result of the wait and not the remaining timeout the return value of __fw_state_wait_common() is changed to signal "done" or "error", which simplifies the logic in _request_firmware_load() as well. Fixes: 5b029624948d ("firmware: do not use fw_lock for fw_state protection") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When request_firmware() finds an already open firmware object it will
wait for that object to become fully loaded and then check the status.
As __fw_state_wait_common() succeeds the timeout value returned will be
truncated in _request_firmware_prepare() and interpreted as -EPERM.

Prior to "firmware: do not use fw_lock for fw_state protection" the code
did test if we where in the "done" state before sleeping, causing this
particular code path to succeed, in some cases.

As the callers are interested in the result of the wait and not the
remaining timeout the return value of __fw_state_wait_common() is
changed to signal "done" or "error", which simplifies the logic in
_request_firmware_load() as well.

Fixes: 5b029624948d ("firmware: do not use fw_lock for fw_state protection")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: remove warning at documentation generation time 2016-12-01T20:41:13+00:00 Silvio Fricke silvio.fricke@gmail.com 2016-11-25T14:59:47+00:00 88bcef508f230c05deaa6e51ddf90ccae15a2824 This patch removes following error at for `make htmldocs`. No functional change. ./drivers/base/firmware_class.c:1348: WARNING: Bullet list ends without a blank line; unexpected unindent. Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch removes following error at for `make htmldocs`. No functional
change.

	./drivers/base/firmware_class.c:1348: WARNING: Bullet list ends without a blank line; unexpected unindent.

Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware: move fw_state_is_done() into UHM section 2016-11-29T20:28:54+00:00 Daniel Wagner daniel.wagner@bmw-carit.de 2016-11-17T10:00:51+00:00 fab82cb3f1e16f22a1910d380ef572e6fe0e9da9 fw_state_is_done() is only used for UHM so moved into that section. Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
fw_state_is_done() is only used for UHM so moved into that section.

Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>