Pull driver core fixes from Danilo Krummrich:

 - Prevent a device from being probed before device_add() has finished
   initializing it; gate probe with a "ready_to_probe" device flag to
   avoid races with concurrent driver_register() calls

 - Fix a kernel-doc warning for DEV_FLAG_COUNT introduced by the above

 - Return -ENOTCONN from software_node_get_reference_args() when a
   referenced software node is known but not yet registered, allowing
   callers to defer probe

 - In sysfs_group_attrs_change_owner(), also check is_visible_const();
   missed when the const variant was introduced

* tag 'driver-core-7.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
  driver core: Add kernel-doc for DEV_FLAG_COUNT enum value
  sysfs: attribute_group: Respect is_visible_const() when changing owner
  software node: return -ENOTCONN when referenced swnode is not registered yet
  driver core: Don't let a device probe until it's ready

Pull driver core updates from Danilo Krummrich:
 "debugfs:
   - Fix NULL pointer dereference in debugfs_create_str()
   - Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
   - Fix soundwire debugfs NULL pointer dereference from uninitialized
     firmware_file

  device property:
   - Make fwnode flags modifications thread safe; widen the field to
     unsigned long and use set_bit() / clear_bit() based accessors
   - Document how to check for the property presence

  devres:
   - Separate struct devres_node from its "subclasses" (struct devres,
     struct devres_group); give struct devres_node its own release and
     free callbacks for per-type dispatch
   - Introduce struct devres_action for devres actions, avoiding the
     ARCH_DMA_MINALIGN alignment overhead of struct devres
   - Export struct devres_node and its init/add/remove/dbginfo
     primitives for use by Rust Devres<T>
   - Fix missing node debug info in devm_krealloc()
   - Use guard(spinlock_irqsave) where applicable; consolidate unlock
     paths in devres_release_group()

  driver_override:
   - Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
     generic driver_override infrastructure, replacing per-bus
     driver_override strings, sysfs attributes, and match logic; fixes a
     potential UAF from unsynchronized access to driver_override in bus
     match() callbacks
   - Simplify __device_set_driver_override() logic

  kernfs:
   - Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs file
     and directory removal
   - Add corresponding selftests for memcg

  platform:
   - Allow attaching software nodes when creating platform devices via a
     new 'swnode' field in struct platform_device_info
   - Add kerneldoc for struct platform_device_info

  software node:
   - Move software node initialization from postcore_initcall() to
     driver_init(), making it available early in the boot process
   - Move kernel_kobj initialization (ksysfs_init) earlier to support
     the above
   - Remove software_node_exit(); dead code in a built-in unit

  SoC:
   - Introduce of_machine_read_compatible() and of_machine_read_model()
     OF helpers and export soc_attr_read_machine() to replace direct
     accesses to of_root from SoC drivers; also enables
     CONFIG_COMPILE_TEST coverage for these drivers

  sysfs:
   - Constify attribute group array pointers to
     'const struct attribute_group *const *' in sysfs functions,
     device_add_groups() / device_remove_groups(), and struct class

  Rust:
   - Devres:
      - Embed struct devres_node directly in Devres<T> instead of going
        through devm_add_action(), avoiding the extra allocation and the
        unnecessary ARCH_DMA_MINALIGN alignment

   - I/O:
      - Turn IoCapable from a marker trait into a functional trait
        carrying the raw I/O accessor implementation (io_read /
        io_write), providing working defaults for the per-type Io
        methods
      - Add RelaxedMmio wrapper type, making relaxed accessors usable in
        code generic over the Io trait
      - Remove overloaded per-type Io methods and per-backend macros
        from Mmio and PCI ConfigSpace

   - I/O (Register):
      - Add IoLoc trait and generic read/write/update methods to the Io
        trait, making I/O operations parameterizable by typed locations
      - Add register! macro for defining hardware register types with
        typed bitfield accessors backed by Bounded values; supports
        direct, relative, and array register addressing
      - Add write_reg() / try_write_reg() and LocatedRegister trait
      - Update PCI sample driver to demonstrate the register! macro

         Example:

         ```
             register! {
                 /// UART control register.
                 CTRL(u32) @ 0x18 {
                     /// Receiver enable.
                     19:19   rx_enable => bool;
                     /// Parity configuration.
                     14:13   parity ?=> Parity;
                 }

                 /// FIFO watermark and counter register.
                 WATER(u32) @ 0x2c {
                     /// Number of datawords in the receive FIFO.
                     26:24   rx_count;
                     /// RX interrupt threshold.
                     17:16   rx_water;
                 }
             }

             impl WATER {
                 fn rx_above_watermark(&self) -> bool {
                     self.rx_count() > self.rx_water()
                 }
             }

             fn init(bar: &pci::Bar<BAR0_SIZE>) {
                 let water = WATER::zeroed()
                     .with_const_rx_water::<1>(); // > 3 would not compile
                 bar.write_reg(water);

                 let ctrl = CTRL::zeroed()
                     .with_parity(Parity::Even)
                     .with_rx_enable(true);
                 bar.write_reg(ctrl);
             }

             fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
                 if bar.read(WATER).rx_above_watermark() {
                     // drain the FIFO
                 }
             }

             fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
                 bar.update(CTRL, |r| r.with_parity(parity));
             }
         ```

   - IRQ:
      - Move 'static bounds from where clauses to trait declarations for
        IRQ handler traits

   - Misc:
      - Enable the generic_arg_infer Rust feature
      - Extend Bounded with shift operations, single-bit bool
        conversion, and const get()

  Misc:
   - Make deferred_probe_timeout default a Kconfig option
   - Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
     callbacks when no bus type PM ops are set
   - Add conditional guard support for device_lock()
   - Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
   - Fix kernel-doc warnings in base.h
   - Fix stale reference to memory_block_add_nid() in documentation"

* tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (67 commits)
  bus: fsl-mc: use generic driver_override infrastructure
  s390/ap: use generic driver_override infrastructure
  s390/cio: use generic driver_override infrastructure
  vdpa: use generic driver_override infrastructure
  platform/wmi: use generic driver_override infrastructure
  PCI: use generic driver_override infrastructure
  driver core: make software nodes available earlier
  software node: remove software_node_exit()
  kernel: ksysfs: initialize kernel_kobj earlier
  MAINTAINERS: add ksysfs.c to the DRIVER CORE entry
  drivers/base/memory: fix stale reference to memory_block_add_nid()
  device property: Document how to check for the property presence
  soundwire: debugfs: initialize firmware_file to empty string
  debugfs: fix placement of EXPORT_SYMBOL_GPL for debugfs_create_str()
  debugfs: check for NULL pointer in debugfs_create_str()
  driver core: Make deferred_probe_timeout default a Kconfig option
  driver core: simplify __device_set_driver_override() clearing logic
  driver core: auxiliary bus: Drop auxiliary_dev_pm_ops
  device property: Make modifications of fwnode "flags" thread safe
  rust: devres: embed struct devres_node directly
  ...

The moment we link a "struct device" into the list of devices for the
bus, it's possible probe can happen. This is because another thread
can load the driver at any time and that can cause the device to
probe. This has been seen in practice with a stack crawl that looks
like this [1]:

  really_probe()
  __driver_probe_device()
  driver_probe_device()
  __driver_attach()
  bus_for_each_dev()
  driver_attach()
  bus_add_driver()
  driver_register()
  __platform_driver_register()
  init_module() [some module]
  do_one_initcall()
  do_init_module()
  load_module()
  __arm64_sys_finit_module()
  invoke_syscall()

As a result of the above, it was seen that device_links_driver_bound()
could be called for the device before "dev->fwnode->dev" was
assigned. This prevented __fw_devlink_pickup_dangling_consumers() from
being called which meant that other devices waiting on our driver's
sub-nodes were stuck deferring forever.

It's believed that this problem is showing up suddenly for two
reasons:
1. Android has recently (last ~1 year) implemented an optimization to
   the order it loads modules [2]. When devices opt-in to this faster
   loading, modules are loaded one-after-the-other very quickly. This
   is unlike how other distributions do it. The reproduction of this
   problem has only been seen on devices that opt-in to Android's
   "parallel module loading".
2. Android devices typically opt-in to fw_devlink, and the most
   noticeable issue is the NULL "dev->fwnode->dev" in
   device_links_driver_bound(). fw_devlink is somewhat new code and
   also not in use by all Linux devices.

Even though the specific symptom where "dev->fwnode->dev" wasn't
assigned could be fixed by moving that assignment higher in
device_add(), other parts of device_add() (like the call to
device_pm_add()) are also important to run before probe. Only moving
the "dev->fwnode->dev" assignment would likely fix the current
symptoms but lead to difficult-to-debug problems in the future.

Fix the problem by preventing probe until device_add() has run far
enough that the device is ready to probe. If somehow we end up trying
to probe before we're allowed, __driver_probe_device() will return
-EPROBE_DEFER which will make certain the device is noticed.

In the race condition that was seen with Android's faster module
loading, we will temporarily add the device to the deferred list and
then take it off immediately when device_add() probes the device.

Instead of adding another flag to the bitfields already in "struct
device", instead add a new "flags" field and use that. This allows us
to freely change the bit from different thread without worrying about
corrupting nearby bits (and means threads changing other bit won't
corrupt us).

[1] Captured on a machine running a downstream 6.6 kernel
[2] https://cs.android.com/android/platform/superproject/main/+/main:system/core/libmodprobe/libmodprobe.cpp?q=LoadModulesParallel

Cc: stable@vger.kernel.org
Fixes: 2023c610dc54 ("Driver core: add new device to bus's list before probing")
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260406162231.v5.1.Id750b0fbcc94f23ed04b7aecabcead688d0d8c17@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>

kernfs has historically used const void * to pass around namespace tags
used for directory-level namespace filtering. The only current user of
this is sysfs network namespace tagging where struct net pointers are
cast to void *.

Replace all const void * namespace parameters with const struct
ns_common * throughout the kernfs, sysfs, and kobject namespace layers.
This includes the kobj_ns_type_operations callbacks, kobject_namespace(),
and all sysfs/kernfs APIs that accept or return namespace tags.

Passing struct ns_common is needed because various codepaths require
access to the underlying namespace. A struct ns_common can always be
converted back to the concrete namespace type (e.g., struct net) via
container_of() or to_ns_common() in the reverse direction.

This is a preparatory change for switching to ns_id-based directory
iteration to prevent a KASLR pointer leak through the current use of
raw namespace pointers as hash seeds and comparison keys.

Signed-off-by: Christian Brauner <brauner@kernel.org>

In various places in the kernel, we modify the fwnode "flags" member
by doing either:
  fwnode->flags |= SOME_FLAG;
  fwnode->flags &= ~SOME_FLAG;

This type of modification is not thread-safe. If two threads are both
mucking with the flags at the same time then one can clobber the
other.

While flags are often modified while under the "fwnode_link_lock",
this is not universally true.

Create some accessor functions for setting, clearing, and testing the
FWNODE flags and move all users to these accessor functions. New
accessor functions use set_bit() and clear_bit(), which are
thread-safe.

Cc: stable@vger.kernel.org
Fixes: c2c724c868c4 ("driver core: Add fw_devlink_parse_fwtree()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Saravana Kannan <saravanak@kernel.org>
Link: https://patch.msgid.link/20260317090112.v2.1.I0a4d03104ecd5103df3d76f66c8d21b1d15a2e38@changeid
[ Fix fwnode_clear_flag() argument alignment, restore dropped blank
  line in fwnode_dev_initialized(), and remove unnecessary parentheses
  around fwnode_test_flag() calls. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>

We need the driver-core fixes in here as well to build on top of.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

Currently, there are 12 busses (including platform and PCI) that
duplicate the driver_override logic for their individual devices.

All of them seem to be prone to the bug described in [1].

While this could be solved for every bus individually using a separate
lock, solving this in the driver-core generically results in less (and
cleaner) changes overall.

Thus, move driver_override to struct device, provide corresponding
accessors for busses and handle locking with a separate lock internally.

In particular, add device_set_driver_override(),
device_has_driver_override(), device_match_driver_override() and
generalize the sysfs store() and show() callbacks via a driver_override
feature flag in struct bus_type.

Until all busses have migrated, keep driver_set_override() in place.

Note that we can't use the device lock for the reasons described in [2].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=220789 [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [2]
Tested-by: Gui-Dong Han <hanguidong02@gmail.com>
Co-developed-by: Gui-Dong Han <hanguidong02@gmail.com>
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260303115720.48783-2-dakr@kernel.org
[ Use dev->bus instead of sp->bus for consistency; fix commit message to
  refer to the struct bus_type's driver_override feature flag. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>

Now that sysfs_create_groups() and sysfs_remove_groups() allow to
pass constant groups arrays, we can constify the groups array argument
also here.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/8ea2d6d1-0adb-4d7f-92bc-751e93ce08d6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>