linux.git/drivers/ata, branch v6.5-rc2

Merge tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-07-03T19:56:23+00:00

Pull driver core updates from Greg KH:
 "Here are a small set of changes for 6.5-rc1 for some driver core
  changes. Included in here are:

   - device property cleanups to make it easier to write "agnostic"
     drivers when regards to the firmware layer underneath them (DT vs.
     ACPI)

   - debugfs documentation updates

   - devres additions

   - sysfs documentation and changes to handle empty directory creation
     logic better

   - tiny kernfs optimizations

   - other tiny changes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: Skip empty folders creation
  sysfs: Improve readability by following the kernel coding style
  drivers: fwnode: fix fwnode_irq_get[_byname]()
  ata: ahci_platform: Make code agnostic to OF/ACPI
  device property: Implement device_is_compatible()
  ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h
  base/node: Use 'property' to identify an access parameter
  driver core: device.h: add some missing kerneldocs
  kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR
  isa: Remove unnecessary checks
  MAINTAINERS: add entry for auxiliary bus
  debugfs: Correct the 'debugfs_create_str' docs
  serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
  iio: adc: Use devm_krealloc_array
  hwmon: pmbus: Use devm_krealloc_array

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-06-30T18:57:07+00:00

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
  lpfc, qla2xxx).

  We have a couple of major core changes impacting other systems:

   - Command Duration Limits, which spills into block and ATA

   - block level Persistent Reservation Operations, which touches block,
     nvme, target and dm

  Both of these are added with merge commits containing a cover letter
  explaining what's going on"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
  scsi: core: Improve warning message in scsi_device_block()
  scsi: core: Replace scsi_target_block() with scsi_block_targets()
  scsi: core: Don't wait for quiesce in scsi_device_block()
  scsi: core: Don't wait for quiesce in scsi_stop_queue()
  scsi: core: Merge scsi_internal_device_block() and device_block()
  scsi: sg: Increase number of devices
  scsi: bsg: Increase number of devices
  scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
  scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
  scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
  scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
  scsi: ufs: ufs-qcom: Switch to the new ICE API
  scsi: ufs: dt-bindings: qcom: Add ICE phandle
  scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
  scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
  scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
  scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
  scsi: ufs: core: Remove dedicated hwq for dev command
  scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
  scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
  ...

Merge tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2023-06-30T18:48:16+00:00

Pull ata updates from Damien Le Moal:

 - Add support for the .remove_new callback to the ata_platform code to
   simplify device removal interface (Uwe)

 - Code simplification in ata_dev_revalidate() (Yahu)

 - Fix code indentation and coding style in the pata_parport protocol
   modules to avoid warnings from static code analyzers (me)

 - Clarify ata_eh_qc_retry() behavior with better comments (Niklas)

 - Simplify and improve ata_change_queue_depth() behavior to have a
   consistent behavior between libsas managed devices and libata managed
   devices (e.g. AHCI connected devices) (me)

 - Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled()
   and ata_ncq_supported() helpers instead of open coding flags tests
   (me)

 - Cleanup ahci_reset_controller() code (me)

 - Change the pata_octeon_cf and sata_svw drivers to use
   of_property_read_reg() to simplify the code (Rob, me)

 - Remove unnecessary include files from ahci_octeon driver (me)

 - Modify the DesignWare ahci dt bindings to add support for the
   Rockchip RK3588 AHCI (Sebastian)

* tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits)
  dt-bindings: phy: rockchip: rk3588 has two reset lines
  dt-bindings: ata: dwc-ahci: add Rockchip RK3588
  dt-bindings: ata: dwc-ahci: add PHY clocks
  ata: ahci_octeon: Remove unnecessary include
  ata: pata_octeon_cf: Add missing header include
  ata: ahci: Cleanup ahci_reset_controller()
  ata: Use of_property_read_reg() to parse "reg"
  ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config()
  ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down()
  ata: libata-sata: Improve ata_change_queue_depth()
  ata: libata-sata: Simplify ata_change_queue_depth()
  ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site
  ata: pata_parport: Fix on26 module code indentation and style
  ata: pata_parport: Fix on20 module code indentation and style
  ata: pata_parport: Fix ktti module code indentation and style
  ata: pata_parport: Fix kbic module code indentation and style
  ata: pata_parport: Fix friq module code indentation and style
  ata: pata_parport: Fix fit3 module code indentation and style
  ata: pata_parport: Fix fit2 module code indentation and style
  ata: pata_parport: Fix epia module code indentation and style
  ...

ata: ahci_octeon: Remove unnecessary include

2023-06-23T00:33:53+00:00

asm/octeon/octeon.h already includes asm/bitfield.h, so there is no need
to include this latter file in ahci_octeon.c as the code does not
directly use the __BITFIELD_FIELD macro defined in it.

Signed-off-by: Damien Le Moal

ata: libata-scsi: Avoid deadlock on rescan after device resume

2023-06-18T03:00:49+00:00

When an ATA port is resumed from sleep, the port is reset and a power
management request issued to libata EH to reset the port and rescanning
the device(s) attached to the port. Device rescanning is done by
scheduling an ata_scsi_dev_rescan() work, which will execute
scsi_rescan_device().

However, scsi_rescan_device() takes the generic device lock, which is
also taken by dpm_resume() when the SCSI device is resumed as well. If
a device rescan execution starts before the completion of the SCSI
device resume, the rcu locking used to refresh the cached VPD pages of
the device, combined with the generic device locking from
scsi_rescan_device() and from dpm_resume() can cause a deadlock.

Avoid this situation by changing struct ata_port scsi_rescan_task to be
a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is
modified to check if the SCSI device associated with the ATA device that
must be rescanned is not suspended. If the SCSI device is still
suspended, ata_scsi_dev_rescan() returns early and reschedule itself for
execution after an arbitrary delay of 5ms.

Reported-by: Kai-Heng Feng 
Reported-by: Joe Breuer 
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530
Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal 
Reviewed-by: Hannes Reinecke 
Tested-by: Kai-Heng Feng 
Tested-by: Joe Breuer

ata: ahci_platform: Make code agnostic to OF/ACPI

2023-06-15T11:34:31+00:00

With the help of a new device_is_compatible() make
the driver code agnostic to the OF/ACPI. This makes
it neater. As a side effect the header inclusions is
corrected (seems mod_devicetable.h was implicitly
included).

Signed-off-by: Andy Shevchenko 
Reviewed-by: Serge Semin 
Reviewed-by: Sakari Ailus 
Message-ID: <20230609154900.43024-4-andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman

ata: pata_octeon_cf: Add missing header include

2023-06-15T00:23:56+00:00

Include the header file linux/of_address.h to avoid compilation errors
triggered by of_property_read_reg() being undeclared.

Fixes: d0b2461678b1 ("ata: Use of_property_read_reg() to parse "reg"")
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202306141702.ZaO9V2lk-lkp@intel.com/
Signed-off-by: Damien Le Moal

ata: ahci: Cleanup ahci_reset_controller()

2023-06-13T23:49:18+00:00

Fix multi-line comment style in ahci_reset_controller() and change the
code to return early if ahci_skip_host_reset is true, reducing
indentation by one level for the bulk of the function code.

No functional changes.

Signed-off-by: Damien Le Moal 
Reviewed-by: Niklas Cassel

ata: Use of_property_read_reg() to parse "reg"

2023-06-13T06:38:48+00:00

Use the recently added of_property_read_reg() helper to get the
untranslated "reg" address value.

Signed-off-by: Rob Herring 
Reviewed-by: Sergey Shtylyov 
Signed-off-by: Damien Le Moal

ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config()

2023-06-05T13:03:28+00:00

In ata_scsi_dev_config(), instead of hard-coding the test to check if
an ATA device supports NCQ by looking at the ATA_DFLAG_NCQ flag, use
ata_ncq_supported().

Signed-off-by: Damien Le Moal 
Reviewed-by: Hannes Reinecke 
Reviewed-by: John Garry 
Reviewed-by: Johannes Thumshirn