linux.git/drivers/ata, branch v3.4-rc4

libata: forbid port runtime pm by default, fixing regression

2012-04-18T18:33:25+00:00

Forbid port runtime pm by default because it has known hotplug issue.
User can allow it by, for example

echo auto > /sys/devices/pci0000:00/0000:00:1f.2/ata2/power/control

Signed-off-by: Lin Ming 
Signed-off-by: Jeff Garzik

libata: make ata_print_id atomic

2012-04-12T19:57:51+00:00

This variable is incremented from multiple contexts (module_init via
libata-lldds and the libsas discovery thread).  Make it atomic to head
off any chance of libsas and libata creating duplicate ids.

Acked-by: Jacek Danecki 
Signed-off-by: Dan Williams 
Signed-off-by: Jeff Garzik

sata_mv: silence an uninitialized variable warning

2012-04-12T19:57:22+00:00

Gcc version 4.6.2-12 complains that if we can't find the "nr-ports"
property in of_property_read_u32_array() then "n_ports" is used
uninitialized.  Let's set it to zero in that case.

Signed-off-by: Dan Carpenter 
Signed-off-by: Jeff Garzik

ata_piix: IDE-mode SATA patch for Intel DH89xxCC DeviceIDs

2012-04-12T19:57:07+00:00

This patch adds the IDE-mode SATA DeviceIDs for the Intel DH89xxCC PCH.

Signed-off-by: Seth Heasley 
Signed-off-by: Jeff Garzik

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

2012-03-23T03:22:30+00:00

Pull libata updates from Jeff Garzik:

 1) AHCI regression fix.  A recent "make driver conform to spec" change
    broke on deployed hardware.  Make new behavior optional, rather than
    default, turning it on only for specific embedded platforms that
    need this.

    Everybody else runs in the famous "non conformant but working" mode.

 2) pata_cmd64x, pata_legacy cleanups

 3) new Intel SATA PCI IDs

 4) misc minor vendor feature additions

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_cmd64x: implement sff_irq_check() method
  pata_cmd64x: implement sff_irq_clear() method
  pata_cmd64x: use interrupt status from MRDMODE register
  pata_cmd64x: turn string of *if* statements into *switch*
  drivers/ata/pata_mpc52xx.c: clean up error handling code
  ahci_platform: add STRICT_AHCI platform type
  ahci: move AHCI_HFLAGS() macro to ahci.h
  ahci: add AHCI_HFLAG_DELAY_ENGINE host flag
  sata_fsl: add support for interrupt coalsecing feature
  ata/pata_arasan_cf: Add Hibernation support
  pata_legacy: correctly mask recovery field for HT6560B
  ata_piix: IDE-mode SATA patch for Intel Lynx Point DeviceIDs
  ahci: AHCI-mode SATA patch for Intel Lynx Point DeviceIDs

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

2012-03-22T19:55:29+00:00

SCSI updates from James Bottomley:
 "The update includes the usual assortment of driver updates (lpfc,
  qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge
  amount of infrastructure work in the SAS library and transport class
  as well as an iSCSI update.  There's also a new SCSI based virtio
  driver."

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits)
  [SCSI] qla4xxx: Update driver version to 5.02.00-k15
  [SCSI] qla4xxx: trivial cleanup
  [SCSI] qla4xxx: Fix sparse warning
  [SCSI] qla4xxx: Add support for multiple session per host.
  [SCSI] qla4xxx: Export CHAP index as sysfs attribute
  [SCSI] scsi_transport: Export CHAP index as sysfs attribute
  [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry
  [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry
  [SCSI] pm8001: fix endian issue with code optimization.
  [SCSI] pm8001: Fix possible racing condition.
  [SCSI] pm8001: Fix bogus interrupt state flag issue.
  [SCSI] ipr: update PCI ID definitions for new adapters
  [SCSI] qla2xxx: handle default case in qla2x00_request_firmware()
  [SCSI] isci: improvements in driver unloading routine
  [SCSI] isci: improve phy event warnings
  [SCSI] isci: debug, provide state-enum-to-string conversions
  [SCSI] scsi_transport_sas: 'enable' phys on reset
  [SCSI] libsas: don't recover end devices attached to disabled phys
  [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata
  [SCSI] libsas: set attached device type and target protocols for local phys
  ...

ata: remove the second argument of k[un]map_atomic()

2012-03-20T13:48:16+00:00

Acked-by: Jeff Garzik 
Signed-off-by: Cong Wang

pata_cmd64x: implement sff_irq_check() method

2012-03-13T20:43:11+00:00

Implement sff_irq_check() method for both old and new chips.

Signed-off-by: Sergei Shtylyov 
Signed-off-by: Jeff Garzik

pata_cmd64x: implement sff_irq_clear() method

2012-03-13T20:43:04+00:00

Convert the driver's two bmdma_stop() methods into sff_irq_clear() methods --
they shouldn't have been bothering with clearing interrupts from the very start;
the driver will now use the standard bmdma_stop() method implementation (where
appropriate).

Signed-off-by: Sergei Shtylyov 
Signed-off-by: Jeff Garzik

pata_cmd64x: use interrupt status from MRDMODE register

2012-03-13T20:42:54+00:00

Start using faster version of the bmdma_stop() method for the PCI0646U and newer
chips that have the duplicate interrupt status  bits  in  the I/O mapped MRDMODE
register. Use the old, slow bmdma_stop() method on the older chips,  taking into
account that the interrupt bits are not coupled to DMA and that's enough to read
the register to clear the interrupt (on the older chips).  Determine what method
to use at the driver load time.

Fix kernel-doc of the bmdma_stop() methods, while at it.

Signed-off-by: Sergei Shtylyov 
Signed-off-by: Jeff Garzik