linux.git/drivers/ata/libata-core.c, branch v6.9

ata: libata-core: Allow command duration limits detection for ACS-4 drives

2024-04-13T01:42:28+00:00

Even though the command duration limits (CDL) feature was first added
in ACS-5 (major version 12), there are some ACS-4 (major version 11)
drives that implement CDL as well.

IDENTIFY_DEVICE, SUPPORTED_CAPABILITIES, and CURRENT_SETTINGS log pages
are mandatory in the ACS-4 standard so it should be safe to read these
log pages on older drives implementing the ACS-4 standard.

Fixes: 62e4a60e0cdb ("scsi: ata: libata: Detect support for command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Pylypiv 
Signed-off-by: Damien Le Moal

ata: libata-core: Do not call ata_dev_power_set_standby() twice

2024-02-21T18:09:17+00:00

For regular system shutdown, ata_dev_power_set_standby() will be
executed twice: once the scsi device is removed and another when
ata_pci_shutdown_one() executes and EH completes unloading the devices.

Make the second call to ata_dev_power_set_standby() do nothing by using
ata_dev_power_is_active() and return if the device is already in
standby.

Fixes: 2da4c5e24e86 ("ata: libata-core: Improve ata_dev_power_set_active()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Signed-off-by: Niklas Cassel

ata: libata-core: Do not try to set sleeping devices to standby

2024-02-14T10:02:08+00:00

In ata ata_dev_power_set_standby(), check that the target device is not
sleeping. If it is, there is no need to do anything.

Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal 
Signed-off-by: Niklas Cassel

ata: libata-core: Fix ata_pci_shutdown_one()

2023-11-07T23:53:55+00:00

This reverts commit 5b6fba546da246b3d0dd8465c07783e22629cc53.

Commit 5b6fba546da2 ("ata: libata-core: Detach a port devices on
shutdown") modified the function ata_pci_shutdown_one() to stop
(suspend) devices attached to the ports of a PCI AHCI adapter to ensure
that drives are spun down before shutting down a system. However, this
is done only for PCI adapters and not for other types of adapters. This
limitation was addressed with commit 24eca2dce0f8 ("scsi: sd: Introduce
manage_shutdown device flag"). With this, all ATA disks are spun down on
system shutdown, which make the changes introduced with 5b6fba546da2
useless.

Signed-off-by: Damien Le Moal 
Reviewed-by: Niklas Cassel

ata: libata-core: Improve ata_dev_power_set_active()

2023-10-15T22:03:02+00:00

Improve the function ata_dev_power_set_active() by having it do nothing
for a disk that is already in the active power state. To do that,
introduce the function ata_dev_power_is_active() to test the current
power state of the disk and return true if the disk is in the PM0:
active or PM1: idle state (0xff value for the count field of the CHECK
POWER MODE command output).

To preserve the existing behavior, if the CHECK POWER MODE command
issued in ata_dev_power_is_active() fails, the drive is assumed to be in
standby mode and false is returned.

With this change, issuing the VERIFY command to access the disk media to
spin it up becomes unnecessary most of the time during system resume as
the port reset done by libata-eh on resume often result in the drive to
spin-up (this behavior is not clearly defined by the ACS specifications
and may thus vary between disk models).

Signed-off-by: Damien Le Moal 
Tested-by: Geert Uytterhoeven 
Reviewed-by: Niklas Cassel

ata: libata-core: Do not resume runtime suspended ports

2023-10-03T00:39:50+00:00

The scsi disk driver does not resume disks that have been runtime
suspended by the user. To be consistent with this behavior, do the same
for ata ports and skip the PM request in ata_port_pm_resume() if the
port was already runtime suspended. With this change, it is no longer
necessary to force the PM state of the port to ACTIVE as the PM core
code will take care of that when handling runtime resume.

Signed-off-by: Damien Le Moal 
Reviewed-by: Hannes Reinecke 
Tested-by: Chia-Lin Kao (AceLan) 
Tested-by: Geert Uytterhoeven 
Reviewed-by: Martin K. Petersen

ata: libata-core: Do not poweroff runtime suspended ports

2023-10-03T00:39:49+00:00

When powering off, there is no need to suspend a port that has already
been runtime suspended. Skip the EH PM request in ata_port_pm_poweroff()
in this case.

Signed-off-by: Damien Le Moal 
Reviewed-by: Hannes Reinecke 
Tested-by: Chia-Lin Kao (AceLan) 
Tested-by: Geert Uytterhoeven 
Reviewed-by: Martin K. Petersen

ata: libata-core: Remove ata_port_resume_async()

2023-10-03T00:39:49+00:00

Remove ata_port_resume_async() and replace it with a modified
ata_port_resume() taking an additional bool argument indicating if
ata EH resume operation should be executed synchronously or
asynchronously. With this change, the variable ata_port_resume_ehi is
not longer necessary and its value (ATA_EHI_XXX flags) passed directly
to ata_port_request_pm().

Signed-off-by: Damien Le Moal 
Reviewed-by: Hannes Reinecke 
Tested-by: Chia-Lin Kao (AceLan) 
Tested-by: Geert Uytterhoeven 
Reviewed-by: Martin K. Petersen

ata: libata-core: Remove ata_port_suspend_async()

2023-10-03T00:39:49+00:00

ata_port_suspend_async() is only called by ata_sas_port_suspend().
Modify ata_port_suspend() with an additional bool argument indicating an
asynchronous or synchronous suspend to allow removing that helper
function. With this change, the variable ata_port_resume_ehi can also be
removed and its value (ATA_EHI_XXX flags passed directly to
ata_port_request_pm().

Signed-off-by: Damien Le Moal 
Reviewed-by: Hannes Reinecke 
Tested-by: Chia-Lin Kao (AceLan) 
Tested-by: Geert Uytterhoeven 
Reviewed-by: Martin K. Petersen

ata: libata-core: Detach a port devices on shutdown

2023-10-03T00:39:49+00:00

Modify ata_pci_shutdown_one() to schedule EH to unload a port devices
before freezing and thawing the port. This ensures that drives are
cleanly disabled and transitioned to standby power mode when
a PCI adapter is removed or the system is powered off.

Signed-off-by: Damien Le Moal 
Reviewed-by: Hannes Reinecke 
Tested-by: Chia-Lin Kao (AceLan) 
Tested-by: Geert Uytterhoeven 
Reviewed-by: Martin K. Petersen