linux.git/drivers/ata/Makefile, branch v4.12

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2017-05-09T17:01:15+00:00

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs:

  Reset subsystem, merged through arm-soc by tradition:
   - Make bool drivers explicitly non-modular
   - New support for i.MX7 and Arria10 reset controllers

  PATA driver for Palmchip BK371 (acked by Tejun)

  Power domain drivers for i.MX (GPC, GPCv2)
   - Moved out of mach-imx for GPC
   - Bunch of tweaks, fixes, etc

  PMC support for Tegra186

  SoC detection support for Renesas RZ/G1H and RZ/G1N

  Move Tegra flow controller driver from mach directory to drivers/soc
   - (Power management / CPU power driver)

  Misc smaller tweaks for other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  soc: pm-domain: Fix the mangled urls
  soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
  soc: renesas: rcar-sysc: Add support for fixing up power area tables
  soc: renesas: Register SoC device early
  soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
  dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
  soc: imx: gpc: add defines for domain index
  soc: imx: Add GPCv2 power gating driver
  dt-bindings: Add GPCv2 power gating driver
  ARM/clk: move the ICST library to drivers/clk
  ARM: plat-versatile: remove stale clock header
  ARM: keystone: Drop PM domain support for k2g
  soc: ti: Add ti_sci_pm_domains driver
  dt-bindings: Add TI SCI PM Domains
  PM / Domains: Do not check if simple providers have phandle cells
  PM / Domains: Add generic data pointer to genpd data struct
  soc/tegra: Add initial flowctrl support for Tegra132/210
  soc/tegra: flowctrl: Add basic platform driver
  soc/tegra: Move Tegra flowctrl driver
  ARM: tegra: Remove unnecessary inclusion of flowctrl header
  ...

ata: add Palmchip BK3710 PATA controller driver

2017-03-30T10:41:32+00:00

Add Palmchip BK3710 PATA controller driver.

Acked-by: Sergei Shtylyov 
Acked-by: Tejun Heo 
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Sekhar Nori

ata: ahci: add support for DaVinci DM816 SATA controller

2017-03-24T15:40:03+00:00

This SATA controller is quite similar to the one present on the DA850
SoC, but the PHY configuration is different and it supports two HBA
ports.

The IP suffers from the same PMP issue the DA850 does - if we enable
PMP but don't use it - softreset fails. Appropriate workaround was
implemented in this driver as well.

Signed-off-by: Bartosz Golaszewski 
Signed-off-by: Tejun Heo

pata: remove the at91 driver

2017-03-16T21:10:52+00:00

This driver is orphan since commit b2026f708e09 ("ARM: at91: remove
at91sam9260/at91sam9g20 legacy board support"). Given that nobody cared
adding DT support to it, it probably means it's no longer used and is
thus a good candidate for removal.

Signed-off-by: Boris Brezillon 
Acked-by: Bartlomiej Zolnierkiewicz 
Acked-by: Nicolas Ferre 
Signed-off-by: Tejun Heo

ata: add Atari Falcon PATA controller driver

2017-01-10T16:11:18+00:00

Add Atari Falcon PATA controller driver.  The major difference
when compared to legacy IDE's falconide host driver is that we
are using polled PIO mode and thus avoiding the need for STDMA
locking magic altogether.

Tested under ARAnyM emulator.

Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Tejun Heo

ata: ahci_brcmstb: rename to support across Broadcom SoC's

2016-06-16T20:24:55+00:00

Rename the existing Broadcom STB ahci driver to common
Broadcom SATA3 driver to share this across Broadcom SoCs.

Signed-off-by: Yendapally Reddy Dhananjaya Reddy 
Acked-by: Florian Fainelli 
Signed-off-by: Tejun Heo

ata: add AMD Seattle platform driver

2016-04-13T19:14:24+00:00

AMD Seattle SATA controller mostly conforms to AHCI interface with some
special register to control SGPIO interface. In the case of an AHCI
controller, the SGPIO feature is ideally implemented using the
"Enclosure Management" register of the AHCI controller, but those
registeres are not implemented in the Seattle SoC. Instead SoC
(Rev B0 onwards) provides a 32-bit SGPIO control register which should
be programmed to control the activity, locate and fault LEDs.

The driver is based on ahci_platform driver.

Signed-off-by: Brijesh Singh 
Acked-by: Hans de Goede 
CC: tj@kernel.org
CC: linux-ide@vger.kernel.org
Signed-off-by: Tejun Heo

libata: support AHCI on OCTEON platform

2016-02-11T15:12:04+00:00

The OCTEON SATA controller is currently found on cn71XX devices.

Acked-by: Arnd Bergmann 
Acked-by: Hans de Goede 
Acked-by: Rob Herring 
Signed-off-by: David Daney 
Signed-off-by: Vinita Gupta 
Signed-off-by: Aleksey Makarov 
Signed-off-by: Zubair Lutfullah Kakakhel 
Signed-off-by: Tejun Heo

ahci: added a new driver for supporting Freescale AHCI sata

2015-09-08T16:30:06+00:00

Currently Freescale QorIQ series SATA is supported by ahci_platform
driver. Some SoC specific settings have been put in uboot. So whether
SATA works or not heavily depends on uboot.
This patch will add a new driver to support QorIQ sata which removes
the dependency on any other boot loader.
Freescale QorIQ series sata, like ls1021a ls2085a ls1043a, is
compatible with serial ATA 3.0 and AHCI 1.3 specification.

Signed-off-by: Yuantian Tang 
Reviewed-by: Hans de Goede 
Signed-off-by: Tejun Heo

drivers: ata: add support for Ceva sata host controller

2015-06-10T02:15:17+00:00

Adds support for Ceva sata host controller on Xilinx
Zynq UltraScale+ MPSoC.

Signed-off-by: Suneel Garapati 
Acked-by: Hans de Goede 
Signed-off-by: Tejun Heo