linux.git/drivers/ata/Kconfig, branch v3.17

libata: Use glob_match from lib/glob.c

2014-08-07T01:01:25+00:00

The function may be useful for other drivers, so export it.  (Suggested
by Tejun Heo.)

Note that I inverted the return value of glob_match; returning true on
match seemed to make more sense.

Signed-off-by: George Spelvin 
Cc: Randy Dunlap 
Cc: Tejun Heo 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ata: Add support for the Tegra124 SATA controller

2014-07-18T21:52:33+00:00

This adds support for the integrated AHCI-compliant Serial ATA
controller present on the NVIDIA Tegra124 system-on-chip.

Signed-off-by: Mikko Perttunen 
Acked-by: Hans de Goede 
Signed-off-by: Tejun Heo

Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2014-06-09T21:58:36+00:00

Pull libata updates from Tejun Heo:
 "Nothing too interesting - another ahci platform driver variant,
  additional controller support, minor fixes and cleanups"

* 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: Add Device ID for HighPoint RocketRaid 642L
  ata: ep93xx: use dmaengine_prep_slave_sg api instead of internal callback
  ahci: add PCI ID for Marvell 88SE91A0 SATA Controller
  sata_fsl: remove check for CONFIG_MPC8315_DS
  ahci: add support for Hisilicon sata
  libahci_platform: add host_flags parameter in ahci_platform_init_host()
  ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
  ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
  ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  Documentation: dt-bindings: reformat and order list of ahci-platform compatibles
  libata-sff: remove dead code
  ata: SATL compliance for Inquiry Product Revision
  pata_octeon_cf: use devm_kzalloc() to allocate cf_port

ata: pata_at91 only works on sam9

2014-05-08T15:00:00+00:00

The smc driver used by pata_at91 is at91sam9 specific, so building
this driver on another at91 platform results in this error:

ERROR: "sam9_smc_configure" [drivers/ata/pata_at91.ko] undefined!
ERROR: "sam9_smc_write_mode" [drivers/ata/pata_at91.ko] undefined!
ERROR: "sam9_smc_read_mode" [drivers/ata/pata_at91.ko] undefined!

This patch changes the Kconfig dependency to ensure it always works.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Tejun Heo 
Cc: linux-ide@vger.kernel.org
Cc: Jean-Christophe Plagniol-Villard 
Cc: Nicolas Ferre

ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces

2014-05-04T19:28:59+00:00

The Marvell Armada 380 SoC includes two AHCI compatible
interfaces. However, like all DMA-capable Marvell interface, they
require special handling to configure MBus windows. Therefore, this
commit adds a new ahci_mvebu driver, which relies on the
libahci_platform.c code recently introduced.

Signed-off-by: Thomas Petazzoni 
Acked-by: Jason Cooper 
Signed-off-by: Tejun Heo

ata: fix i.MX AHCI driver dependencies

2014-04-08T12:31:48+00:00

The ahci_imx driver is only needed on Freescale i.MX platforms so
don't let it be built on other platforms, except for build test
purpose.

Signed-off-by: Jean Delvare 
Cc: Tejun Heo 
Cc: Richard Zhu 
Signed-off-by: Tejun Heo

libata: make AHCI_XGENE depend on PHY_XGENE

2014-04-02T16:42:45+00:00

AHCI_XGENE is only applicable on ARM64 but it can also be enabled for
compile testing; however, AHCI_XGENE selects PHY_XGENE which has other
arch specific dependencies.  This leads to the following warning when
enabling it on other archs for compile testing.

  warning: (AHCI_XGENE) selects PHY_XGENE which has unmet direct
  dependencies (HAS_IOMEM && OF && (ARM64 || COMPILE_TEST))

Selecting a config option which itself has dependencies can easily
lead to broken configurations.  For now, let's just make AHCI_XGENE
depend on PHY_XGENE which has all the necessary dependencies already.

Signed-off-by: Tejun Heo 
Reported-by: Linus Torvalds 
Cc: Loc Ho 
Cc: Bartlomiej Zolnierkiewicz 
Cc: Kishon Vijay Abraham I

Merge branch 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2014-03-31T22:27:37+00:00

Pull libata updates from Tejun Heo:
 "A lot of activities on libata side this time.

   - A lot of changes around ahci.  Various embedded platforms are
     implementing ahci controllers.  Some were built atop ahci_platform,
     others were doing their own things.  Hans made some structural
     changes to libahci and librarized ahci_platform so that ahci
     platform drivers can share more common code.  A couple platform
     drivers are added on top of that and several are added to replace
     older drivers which were doing their own things (older ones are
     scheduled to be removed).

   - Dan finishes the patchset to make libata PM operations
     asynchronous.  Combined with one patch being routed through scsi,
     this should speed resume measurably.

   - Various fixes and cleanups from Bartlomiej and others"

* 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (61 commits)
  ata: fix Marvell SATA driver dependencies
  ata: fix ARASAN CompactFlash PATA driver dependencies
  ata: remove superfluous casts
  ata: sata_highbank: remove superfluous cast
  ata: fix Calxeda Highbank SATA driver dependencies
  ata: fix R-Car SATA driver dependencies
  ARM: davinci: da850: update SATA AHCI support
  ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  ata: move library code from ahci_platform.c to libahci_platform.c
  ata: ahci_platform: fix ahci_platform_data->suspend method handling
  libata: remove unused ata_sas_port_async_resume() stub
  libata.h: add stub for ata_sas_port_resume
  libata: async resume
  libata, libsas: kill pm_result and related cleanup
  ata: Fix compiler warning with APM X-Gene host controller driver
  arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
  ata: Add APM X-Gene SoC AHCI SATA host controller driver
  Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding
  arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries
  ata: ahci_sunxi: fix code formatting
  ...

ata: fix Marvell SATA driver dependencies

2014-03-27T14:50:33+00:00

Make sata_mv host driver depend on PCI || ARCH_DOVE || ARCH_KIRKWOOD ||
ARCH_MV78XX0 || ARCH_MVEBU || ARCH_ORION5X config options as Marvell
SATA support covers both Marvell PCI devices and Marvell Dove, Kirkwood,
MV78xx0, Armada 370/XP and Orion5x SoCs (for non-PCI devices the driver
to work requires suitable device tree node or platform device to be
defined).  Additionally allow the driver build if COMPILE_TEST config
option is set.

Cc: Jason Cooper 
Cc: Andrew Lunn 
Cc: Gregory Clement 
Cc: Sebastian Hesselbarth 
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Tejun Heo

ata: fix ARASAN CompactFlash PATA driver dependencies

2014-03-26T16:49:26+00:00

Make pata_arasan_cf host driver depend on ARCH_SPEAR13XX config
option as ARASAN CompactFlash PATA support is specific to ST
SPEAr13xx SoCs and the driver to work requires suitable device
tree node (or platform device) to be defined.  Additionally
allow the driver build if COMPILE_TEST config option is set.

Cc: Viresh Kumar 
Cc: Shiraz Hashim 
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Tejun Heo