linux.git/drivers/acpi, branch v6.9-rc4 Linux kernel source tree ACPI: scan: Do not increase dep_unmet for already met dependencies 2024-04-08T14:44:14+00:00 Hans de Goede hdegoede@redhat.com 2024-04-06T11:40:52+00:00 d730192ff0246356a2d7e63ff5bd501060670eec On the Toshiba Encore WT10-A tablet the BATC battery ACPI device depends on 3 other devices: Name (_DEP, Package (0x03) // _DEP: Dependencies { I2C1, GPO2, GPO0 }) acpi_scan_check_dep() adds all 3 of these to the acpi_dep_list and then before an acpi_device is created for the BATC handle (and thus before acpi_scan_dep_init() runs) acpi_scan_clear_dep() gets called for both GPIO depenencies, with free_when_met not set for the dependencies. Since there is no adev for BATC yet, there also is no dep_unmet to decrement. The only result of acpi_scan_clear_dep() in this case is dep->met getting set. Soon after acpi_scan_clear_dep() has been called for the GPIO dependencies the acpi_device gets created for the BATC handle and acpi_scan_dep_init() runs, this sees 3 dependencies on the acpi_dep_list and initializes unmet_dep to 3. Later when the dependency for I2C1 is met unmet_dep becomes 2, but since the 2 GPIO deps where already met it never becomes 0 causing battery monitoring to not work. Fix this by modifying acpi_scan_dep_init() to not increase dep_met for dependencies which have already been marked as being met. Fixes: 3ba12d8de3fa ("ACPI: scan: Reduce overhead related to devices with dependencies") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: 6.5+ <stable@vger.kernel.org> # 6.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
On the Toshiba Encore WT10-A tablet the BATC battery ACPI device depends
on 3 other devices:

            Name (_DEP, Package (0x03)  // _DEP: Dependencies
            {
                I2C1,
                GPO2,
                GPO0
            })

acpi_scan_check_dep() adds all 3 of these to the acpi_dep_list and then
before an acpi_device is created for the BATC handle (and thus before
acpi_scan_dep_init() runs) acpi_scan_clear_dep() gets called for both
GPIO depenencies, with free_when_met not set for the dependencies.

Since there is no adev for BATC yet, there also is no dep_unmet to
decrement. The only result of acpi_scan_clear_dep() in this case is
dep->met getting set.

Soon after acpi_scan_clear_dep() has been called for the GPIO dependencies
the acpi_device gets created for the BATC handle and acpi_scan_dep_init()
runs, this sees 3 dependencies on the acpi_dep_list and initializes
unmet_dep to 3. Later when the dependency for I2C1 is met unmet_dep
becomes 2, but since the 2 GPIO deps where already met it never becomes 0
causing battery monitoring to not work.

Fix this by modifying acpi_scan_dep_init() to not increase dep_met for
dependencies which have already been marked as being met.

Fixes: 3ba12d8de3fa ("ACPI: scan: Reduce overhead related to devices with dependencies")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI: thermal: Register thermal zones without valid trip points 2024-04-02T19:38:45+00:00 Stephen Horvath s.horvath@outlook.com.au 2024-03-31T08:37:06+00:00 8a4ff5452dd0cdcc35940460bb777d836bece11c Some laptops where the thermal control is handled by the EC may provide trip points that fail the kernels new validation, but still have working temperature sensors. An example of this is the Framework 13 AMD. This patch allows the thermal zone to still be registered without trip points if the trip points fail validation, allowing the temperature sensor to be viewed and used by the user. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218586 Fixes: 9c8647224e9f ("ACPI: thermal: Use library functions to obtain trip point temperature values") Signed-off-by: Stephen Horvath <s.horvath@outlook.com.au> [ rjw: Subject edits, remove redundant braces ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Some laptops where the thermal control is handled by the EC may
provide trip points that fail the kernels new validation, but still have
working temperature sensors. An example of this is the Framework 13 AMD.

This patch allows the thermal zone to still be registered without trip
points if the trip points fail validation, allowing the temperature
sensor to be viewed and used by the user.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218586
Fixes: 9c8647224e9f ("ACPI: thermal: Use library functions to obtain trip point temperature values")
Signed-off-by: Stephen Horvath <s.horvath@outlook.com.au>
[ rjw: Subject edits, remove redundant braces ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge branch 'acpica' 2024-03-29T18:00:09+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2024-03-29T18:00:09+00:00 6af71633b04036a12d165d03ce6f21145ec5a555 * acpica: ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields() 
* acpica:
  ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields()
ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields() 2024-03-26T12:06:47+00:00 Nikita Kiryushin kiryushin@ancud.ru 2024-03-22T18:07:53+00:00 40e2710860e57411ab57a1529c5a2748abbe8a19 ACPICA commit 9061cd9aa131205657c811a52a9f8325a040c6c9 Errors in acpi_evaluate_object() can lead to incorrect state of buffer. This can lead to access to data in previously ACPI_FREEd buffer and secondary ACPI_FREE to the same buffer later. Handle errors in acpi_evaluate_object the same way it is done earlier with acpi_ns_handle_to_pathname. Found by Linux Verification Center (linuxtesting.org) with SVACE. Link: https://github.com/acpica/acpica/commit/9061cd9a Fixes: 5fd033288a86 ("ACPICA: debugger: add command to dump all fields of particular subtype") Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
ACPICA commit 9061cd9aa131205657c811a52a9f8325a040c6c9

Errors in acpi_evaluate_object() can lead to incorrect state of buffer.

This can lead to access to data in previously ACPI_FREEd buffer and
secondary ACPI_FREE to the same buffer later.

Handle errors in acpi_evaluate_object the same way it is done earlier
with acpi_ns_handle_to_pathname.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Link: https://github.com/acpica/acpica/commit/9061cd9a
Fixes: 5fd033288a86 ("ACPICA: debugger: add command to dump all fields of particular subtype")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI: APEI: EINJ: mark remove callback as non-__exit 2024-03-26T11:16:06+00:00 Arnd Bergmann arnd@arndb.de 2024-03-20T18:02:50+00:00 a24118a8a6870fe06dbbd59f915b9ca3662b2ddb The remove callback of a device is called whenever it is unbound, which may happen during runtime e.g. through sysfs, so this is not allowed to be dropped from the binary: WARNING: modpost: vmlinux: section mismatch in reference: einj_driver+0x8 (section: .data) -> einj_remove (section: .exit.text) ERROR: modpost: Section mismatches detected. Remove that annotation. Fixes: 12fb28ea6b1c ("EINJ: Add CXL error type support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
The remove callback of a device is called whenever it is unbound,
which may happen during runtime e.g. through sysfs, so this is not
allowed to be dropped from the binary:

WARNING: modpost: vmlinux: section mismatch in reference: einj_driver+0x8 (section: .data) -> einj_remove (section: .exit.text)
ERROR: modpost: Section mismatches detected.

Remove that annotation.

Fixes: 12fb28ea6b1c ("EINJ: Add CXL error type support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux 2024-03-22T17:41:13+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-22T17:41:13+00:00 c150b809f7de2afdd3fb5a9adff2a9a68d7331ce Pull RISC-V updates from Palmer Dabbelt: - Support for various vector-accelerated crypto routines - Hibernation is now enabled for portable kernel builds - mmap_rnd_bits_max is larger on systems with larger VAs - Support for fast GUP - Support for membarrier-based instruction cache synchronization - Support for the Andes hart-level interrupt controller and PMU - Some cleanups around unaligned access speed probing and Kconfig settings - Support for ACPI LPI and CPPC - Various cleanus related to barriers - A handful of fixes * tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits) riscv: Fix syscall wrapper for >word-size arguments crypto: riscv - add vector crypto accelerated AES-CBC-CTS crypto: riscv - parallelize AES-CBC decryption riscv: Only flush the mm icache when setting an exec pte riscv: Use kcalloc() instead of kzalloc() riscv/barrier: Add missing space after ',' riscv/barrier: Consolidate fence definitions riscv/barrier: Define RISCV_FULL_BARRIER riscv/barrier: Define __{mb,rmb,wmb} RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ cpufreq: Move CPPC configs to common Kconfig and add RISC-V ACPI: RISC-V: Add CPPC driver ACPI: Enable ACPI_PROCESSOR for RISC-V ACPI: RISC-V: Add LPI driver cpuidle: RISC-V: Move few functions to arch/riscv riscv: Introduce set_compat_task() in asm/compat.h riscv: Introduce is_compat_thread() into compat.h riscv: add compile-time test into is_compat_task() riscv: Replace direct thread flag check with is_compat_task() riscv: Improve arch_get_mmap_end() macro ... 
Pull RISC-V updates from Palmer Dabbelt:

 - Support for various vector-accelerated crypto routines

 - Hibernation is now enabled for portable kernel builds

 - mmap_rnd_bits_max is larger on systems with larger VAs

 - Support for fast GUP

 - Support for membarrier-based instruction cache synchronization

 - Support for the Andes hart-level interrupt controller and PMU

 - Some cleanups around unaligned access speed probing and Kconfig
   settings

 - Support for ACPI LPI and CPPC

 - Various cleanus related to barriers

 - A handful of fixes

* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
  riscv: Fix syscall wrapper for >word-size arguments
  crypto: riscv - add vector crypto accelerated AES-CBC-CTS
  crypto: riscv - parallelize AES-CBC decryption
  riscv: Only flush the mm icache when setting an exec pte
  riscv: Use kcalloc() instead of kzalloc()
  riscv/barrier: Add missing space after ','
  riscv/barrier: Consolidate fence definitions
  riscv/barrier: Define RISCV_FULL_BARRIER
  riscv/barrier: Define __{mb,rmb,wmb}
  RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
  cpufreq: Move CPPC configs to common Kconfig and add RISC-V
  ACPI: RISC-V: Add CPPC driver
  ACPI: Enable ACPI_PROCESSOR for RISC-V
  ACPI: RISC-V: Add LPI driver
  cpuidle: RISC-V: Move few functions to arch/riscv
  riscv: Introduce set_compat_task() in asm/compat.h
  riscv: Introduce is_compat_thread() into compat.h
  riscv: add compile-time test into is_compat_task()
  riscv: Replace direct thread flag check with is_compat_task()
  riscv: Improve arch_get_mmap_end() macro
  ...
Merge tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 2024-03-21T21:41:00+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-21T21:41:00+00:00 1d35aae78ffe739bf46c2bf9dea7b51a4eebfbe0 Pull Kbuild updates from Masahiro Yamada: - Generate a list of built DTB files (arch/*/boot/dts/dtbs-list) - Use more threads when building Debian packages in parallel - Fix warnings shown during the RPM kernel package uninstallation - Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to Makefile - Support GCC's -fmin-function-alignment flag - Fix a null pointer dereference bug in modpost - Add the DTB support to the RPM package - Various fixes and cleanups in Kconfig * tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits) kconfig: tests: test dependency after shuffling choices kconfig: tests: add a test for randconfig with dependent choices kconfig: tests: support KCONFIG_SEED for the randconfig runner kbuild: rpm-pkg: add dtb files in kernel rpm kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig() kconfig: check prompt for choice while parsing kconfig: lxdialog: remove unused dialog colors kconfig: lxdialog: fix button color for blackbg theme modpost: fix null pointer dereference kbuild: remove GCC's default -Wpacked-bitfield-compat flag kbuild: unexport abs_srctree and abs_objtree kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1 kconfig: remove named choice support kconfig: use linked list in get_symbol_str() to iterate over menus kconfig: link menus to a symbol kbuild: fix inconsistent indentation in top Makefile kbuild: Use -fmin-function-alignment when available alpha: merge two entries for CONFIG_ALPHA_GAMMA alpha: merge two entries for CONFIG_ALPHA_EV4 kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj) ... 
Pull Kbuild updates from Masahiro Yamada:

 - Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)

 - Use more threads when building Debian packages in parallel

 - Fix warnings shown during the RPM kernel package uninstallation

 - Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
   Makefile

 - Support GCC's -fmin-function-alignment flag

 - Fix a null pointer dereference bug in modpost

 - Add the DTB support to the RPM package

 - Various fixes and cleanups in Kconfig

* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
  kconfig: tests: test dependency after shuffling choices
  kconfig: tests: add a test for randconfig with dependent choices
  kconfig: tests: support KCONFIG_SEED for the randconfig runner
  kbuild: rpm-pkg: add dtb files in kernel rpm
  kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
  kconfig: check prompt for choice while parsing
  kconfig: lxdialog: remove unused dialog colors
  kconfig: lxdialog: fix button color for blackbg theme
  modpost: fix null pointer dereference
  kbuild: remove GCC's default -Wpacked-bitfield-compat flag
  kbuild: unexport abs_srctree and abs_objtree
  kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
  kconfig: remove named choice support
  kconfig: use linked list in get_symbol_str() to iterate over menus
  kconfig: link menus to a symbol
  kbuild: fix inconsistent indentation in top Makefile
  kbuild: Use -fmin-function-alignment when available
  alpha: merge two entries for CONFIG_ALPHA_GAMMA
  alpha: merge two entries for CONFIG_ALPHA_EV4
  kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
  ...
ACPI: RISC-V: Add CPPC driver 2024-03-20T01:30:54+00:00 Sunil V L sunilvl@ventanamicro.com 2024-02-08T03:44:12+00:00 30f3ffbee86b576705aabdd9093165a49cd66011 Add cpufreq driver based on ACPI CPPC for RISC-V. The driver uses either SBI CPPC interfaces or the CSRs to access the CPPC registers as defined by the RISC-V FFH spec. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20240208034414.22579-2-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 
Add cpufreq driver based on ACPI CPPC for RISC-V. The driver uses either
SBI CPPC interfaces or the CSRs to access the CPPC registers as defined
by the RISC-V FFH spec.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ACPI: Enable ACPI_PROCESSOR for RISC-V 2024-03-20T00:51:40+00:00 Sunil V L sunilvl@ventanamicro.com 2024-01-18T06:29:30+00:00 359df7c5be4ba5c57f641010be7237ad9f09ea53 The ACPI processor driver is not currently enabled for RISC-V. This is required to enable CPU related functionalities like LPI and CPPC. Hence, enable ACPI_PROCESSOR for RISC-V. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20240118062930.245937-4-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 
The ACPI processor driver is not currently enabled for RISC-V.
This is required to enable CPU related functionalities like
LPI and CPPC. Hence, enable ACPI_PROCESSOR for RISC-V.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ACPI: RISC-V: Add LPI driver 2024-03-20T00:51:39+00:00 Sunil V L sunilvl@ventanamicro.com 2024-01-18T06:29:29+00:00 4877fc92142f635be418d8c915eb48ef87681108 Enable Low Power Idle (LPI) based cpuidle driver for RISC-V platforms. It depends on SBI HSM calls for idle state transitions. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20240118062930.245937-3-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 
Enable Low Power Idle (LPI) based cpuidle driver for RISC-V platforms.
It depends on SBI HSM calls for idle state transitions.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>