linux.git/drivers/acpi, branch v6.3-rc5

ACPI: bus: Rework system-level device notification handling

2023-03-27T17:56:03+00:00

For ACPI drivers that provide a ->notify() callback and set
ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be
invoked while either the ->add() or the ->remove() callback is running
without any synchronization at the bus type level which is counter to
the common-sense expectation that notification handling should only be
enabled when the driver is actually bound to the device.  As a result,
if the driver is not careful enough, it's ->notify() callback may crash
when it is invoked too early or too late [1].

This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop
driver member of struct acpi_device") that made acpi_bus_notify() check
for the presence of the driver and its ->notify() callback directly
instead of using an extra driver pointer that was only set and cleared
by the bus type code, but it was present before that commit although
it was harder to reproduce then.

It can be addressed by using the observation that
acpi_device_install_notify_handler() can be modified to install the
handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is
set in the driver flags, in which case acpi_bus_notify() will not need
to invoke the driver's ->notify() callback any more and that callback
will only be invoked after acpi_device_install_notify_handler() has run
and before acpi_device_remove_notify_handler() runs, which implies the
correct ordering with respect to the other ACPI driver callbacks.

Modify the code accordingly and while at it, drop two redundant local
variables from acpi_bus_notify() and turn its description comment into
a proper kerneldoc one.

Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device")
Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1]
Reported-by: Pierre Asselin 
Signed-off-by: Rafael J. Wysocki 
Tested-by: Pierre Asselin

Merge tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2023-03-24T20:45:58+00:00

Pull thermal control fixes from Rafael Wysocki:
 "These address two recent regressions related to thermal control.

  Specifics:

   - Restore the thermal core behavior regarding zero-temperature trip
     points to avoid a driver regression (Ido Schimmel)

   - Fix a recent regression in the ACPI processor driver preventing it
     from changing the number of CPU cooling device states exposed via
     sysfs after the given CPU cooling device has been registered
     (Rafael Wysocki)"

* tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Restore behavior regarding invalid trip points
  ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
  thermal: core: Introduce thermal_cooling_device_update()
  thermal: core: Introduce thermal_cooling_device_present()
  ACPI: processor: Reorder acpi_processor_driver_init()

Merge branch 'acpi-video'

2023-03-24T16:08:52+00:00

Merge an ACPI backlight quirk for Acer Aspire 3830TG (Hans de Goede).

* acpi-video:
  ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG

ACPI: resource: Add Medion S17413 to IRQ override quirk

2023-03-24T16:07:56+00:00

Add DMI info of the Medion S17413 (board M1xA) to the IRQ override
quirk table. This fixes the keyboard not working on these laptops.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213031
Signed-off-by: Aymeric Wibo 
[ rjw: Fixed up white space ]
Signed-off-by: Rafael J. Wysocki

ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes

2023-03-22T14:20:38+00:00

When a cpufreq policy appears or goes away, the CPU cooling devices for
the CPUs covered by that policy need to be updated so that the new
processor_get_max_state() value is stored as max_state and the
statistics in sysfs are rearranged for each of them.

Do that accordingly in acpi_thermal_cpufreq_init() and
acpi_thermal_cpufreq_exit().

Fixes: a365105c685c("thermal: sysfs: Reuse cdev->max_state")
Reported-by: Wang, Quanxian 
Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com
Signed-off-by: Rafael J. Wysocki 
Tested-by: Zhang Rui 
Reviewed-by: Zhang Rui

ACPI: processor: Reorder acpi_processor_driver_init()

2023-03-22T14:20:38+00:00

The cpufreq policy notifier in the ACPI processor driver may as
well be registered before the driver itself, which causes
acpi_processor_cpufreq_init to be true (unless the notifier
registration fails, which is unlikely at that point) when the
ACPI CPU thermal cooling devices are registered, so the
processor_get_max_state() result does not change while
acpi_processor_driver_init() is running.

Change the ordering in acpi_processor_driver_init() accordingly
to prevent the max_state value from remaining 0 permanently for all
ACPI CPU cooling devices due to setting acpi_processor_cpufreq_init
too late.  [Note that processor_get_max_state() may still return
different values at different times after this change, depending on
the cpufreq driver registration time, but that issue needs to be
addressed separately.]

Fixes: a365105c685c("thermal: sysfs: Reuse cdev->max_state")
Reported-by: Wang, Quanxian 
Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com
Signed-off-by: Rafael J. Wysocki 
Tested-by: Zhang Rui 
Reviewed-by: Zhang Rui

ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG

2023-03-20T18:11:42+00:00

The Acer Aspire 3830TG predates Windows 8, so it defaults to using
acpi_video# for backlight control, but this is non functional on
this model.

Add a DMI quirk to use the native backlight interface which does
work properly.

Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki

Merge branches 'acpi-video', 'acpi-x86', 'acpi-tools' and 'acpi-docs'

2023-03-17T15:44:41+00:00

Merge a new ACPI backlight quirk, new ACPI quirks for I2C device
enumeration on some platforms, a pfrut utility fix and an ACPI
documentation fix for 6.3-rc3:

 - Add backlight=native DMI quirk for Dell Vostro 15 3535 to the ACPI
   video driver (Chia-Lin Kao).

 - Add ACPI quirks for I2C devices enumeration on Lenovo Yoga Book X90
   and Acer Iconia One 7 B1-750 (Hans de Goede).

 - Fix handling of invalid command line option values in the ACPI pfrut
   utility (Chen Yu).

 - Fix references to I2C device data type in the ACPI documentation for
   device enumeration (Andy Shevchenko).

* acpi-video:
  ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535

* acpi-x86:
  ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90
  ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750
  ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper

* acpi-tools:
  ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range

* acpi-docs:
  ACPI: docs: enumeration: Correct reference to the I²C device data type

ACPI: PPTT: Fix to avoid sleep in the atomic context when PPTT is absent

2023-03-14T19:34:38+00:00

Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
enabled to map PPTT once on the first invocation of acpi_get_pptt() and
never unmapped the same allowing it to be used at runtime with out the
hassle of mapping and unmapping the table. This was needed to fetch LLC
information from the PPTT in the cpuhotplug path which is executed in
the atomic context as the acpi_get_table() might sleep waiting for a
mutex.

However it missed to handle the case when there is no PPTT on the system
which results in acpi_get_pptt() being called from all the secondary
CPUs attempting to fetch the LLC information in the atomic context
without knowing the absence of PPTT resulting in the splat like below:

 | BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:164
 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
 | preempt_count: 1, expected: 0
 | RCU nest depth: 0, expected: 0
 | no locks held by swapper/1/0.
 | irq event stamp: 0
 | hardirqs last  enabled at (0): 0x0
 | hardirqs last disabled at (0): copy_process+0x61c/0x1b40
 | softirqs last  enabled at (0): copy_process+0x61c/0x1b40
 | softirqs last disabled at (0): 0x0
 | CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.3.0-rc1 #1
 | Call trace:
 |  dump_backtrace+0xac/0x138
 |  show_stack+0x30/0x48
 |  dump_stack_lvl+0x60/0xb0
 |  dump_stack+0x18/0x28
 |  __might_resched+0x160/0x270
 |  __might_sleep+0x58/0xb0
 |  down_timeout+0x34/0x98
 |  acpi_os_wait_semaphore+0x7c/0xc0
 |  acpi_ut_acquire_mutex+0x58/0x108
 |  acpi_get_table+0x40/0xe8
 |  acpi_get_pptt+0x48/0xa0
 |  acpi_get_cache_info+0x38/0x140
 |  init_cache_level+0xf4/0x118
 |  detect_cache_attributes+0x2e4/0x640
 |  update_siblings_masks+0x3c/0x330
 |  store_cpu_topology+0x88/0xf0
 |  secondary_start_kernel+0xd0/0x168
 |  __secondary_switched+0xb8/0xc0

Update acpi_get_pptt() to consider the fact that PPTT is once checked and
is not available on the system and return NULL avoiding any attempts to
fetch PPTT and thereby avoiding any possible sleep waiting for a mutex
in the atomic context.

Fixes: 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
Reported-by: Aishwarya TCV 
Signed-off-by: Sudeep Holla 
Tested-by: Pierre Gondois 
Cc: 6.0+  # 6.0+
Signed-off-by: Rafael J. Wysocki

ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90

2023-03-07T13:15:10+00:00

The Lenovo Yoga Book X90 is a x86 tablet which ships with Android x86
as factory OS. The Android x86 kernel fork ignores I2C devices described
in the DSDT, except for the PMIC and Audio codecs.

As usual the Lenovo Yoga Book X90's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Book X90
to the acpi_quirk_skip_dmi_ids table to woraround this.

The DSDT also contains broken ACPI GPIO event handlers, disable those too.

Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki