linux.git/drivers/acpi, branch v4.20-rc2

acpi/nfit, x86/mce: Validate a MCE's address before using it

2018-11-06T18:13:26+00:00

The NFIT machine check handler uses the physical address from the mce
structure, and compares it against information in the ACPI NFIT table
to determine whether that location lies on an NVDIMM. The mce->addr
field however may not always be valid, and this is indicated by the
MCI_STATUS_ADDRV bit in the status field.

Export mce_usable_address() which already performs validation for the
address, and use it in the NFIT handler.

Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error")
Reported-by: Robert Elliott 
Signed-off-by: Vishal Verma 
Signed-off-by: Borislav Petkov 
CC: Arnd Bergmann 
Cc: Dan Williams 
CC: Dave Jiang 
CC: elliott@hpe.com
CC: "H. Peter Anvin" 
CC: Ingo Molnar 
CC: Len Brown 
CC: linux-acpi@vger.kernel.org
CC: linux-edac 
CC: linux-nvdimm@lists.01.org
CC: Qiuxu Zhuo 
CC: "Rafael J. Wysocki" 
CC: Ross Zwisler 
CC: stable 
CC: Thomas Gleixner 
CC: Tony Luck 
CC: x86-ml 
CC: Yazen Ghannam 
Link: http://lkml.kernel.org/r/20181026003729.8420-2-vishal.l.verma@intel.com

acpi/nfit, x86/mce: Handle only uncorrectable machine checks

2018-11-06T18:13:10+00:00

The MCE handler for nfit devices is called for memory errors on a
Non-Volatile DIMM and adds the error location to a 'badblocks' list.
This list is used by the various NVDIMM drivers to avoid consuming known
poison locations during IO.

The MCE handler gets called for both corrected and uncorrectable errors.
Until now, both kinds of errors have been added to the badblocks list.
However, corrected memory errors indicate that the problem has already
been fixed by hardware, and the resulting interrupt is merely a
notification to Linux.

As far as future accesses to that location are concerned, it is
perfectly fine to use, and thus doesn't need to be included in the above
badblocks list.

Add a check in the nfit MCE handler to filter out corrected mce events,
and only process uncorrectable errors.

Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error")
Reported-by: Omar Avelar 
Signed-off-by: Vishal Verma 
Signed-off-by: Borislav Petkov 
CC: Arnd Bergmann 
CC: Dan Williams 
CC: Dave Jiang 
CC: elliott@hpe.com
CC: "H. Peter Anvin" 
CC: Ingo Molnar 
CC: Len Brown 
CC: linux-acpi@vger.kernel.org
CC: linux-edac 
CC: linux-nvdimm@lists.01.org
CC: Qiuxu Zhuo 
CC: "Rafael J. Wysocki" 
CC: Ross Zwisler 
CC: stable 
CC: Thomas Gleixner 
CC: Tony Luck 
CC: x86-ml 
CC: Yazen Ghannam 
Link: http://lkml.kernel.org/r/20181026003729.8420-1-vishal.l.verma@intel.com

Merge tag 'pwm/for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

2018-11-02T18:22:45+00:00

Pull pwm updates from Thierry Reding:
 "This series contains a number of improvements to existing drivers,
  such as LPSS. Some drivers, such as renesas-tpu and rcar get support
  for more SoC generations. To round things off this fixes an issue with
  the sysfs interface"

* tag 'pwm/for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: lpss: Only set update bit if we are actually changing the settings
  pwm: lpss: Force runtime-resume on suspend on Cherry Trail
  pwm: Enable TI ECAP driver for ARCH_K3
  dt-bindings: pwm: tiecap: Add TI AM654 SoC specific compatible
  dt-bindings: pwm: rcar: Add r8a774a1 support
  pwm: Send a uevent on the pwmchip device upon channel sysfs (un)export
  Revert "pwm: Set class for exported channels in sysfs"
  dt-bindings: pwm: renesas-tpu: Document r8a7744 support
  dt-bindings: pwm: rcar: Add r8a7744 support
  dt-bindings: pwm: renesas: tpu: Document R8A779{7|8}0 bindings
  dt-bindings: pwm: renesas: pwm-rcar: Document R8A779{7|8}0 bindings
  dt-bindings: pwm: renesas: tpu: Fix "compatible" prop description
  pwm: Use SPDX identifier for Renesas drivers
  pwm: lpss: Add get_state callback
  pwm: lpss: Release runtime-pm reference from the driver's remove callback
  pwm: lpss: Check PWM powerstate after resume on Cherry Trail devices
  pwm: lpss: Move struct pwm_lpss_chip definition to the header file
  pwm: lpss: Add ACPI HID for second PWM controller on Cherry Trail devices
  ACPI / PM: Export acpi_device_get_power() for use by modular build drivers
  pwm: tegra: Remove gratuituous blank line

mm/memory_hotplug: make add_memory() take the device_hotplug_lock

2018-10-31T15:54:17+00:00

add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
	arch/powerpc/platforms/pseries/hotplug-memory.c
	drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.

In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g.  from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b3be ("mm, hotplug: fix concurrent memory
hot-add deadlock").  add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.

Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.

The lock is not held yet in
	drivers/xen/balloon.c
	arch/powerpc/platforms/powernv/memtrace.c
	drivers/s390/char/sclp_cmd.c
	drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.

Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module.  If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).

Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com
Signed-off-by: David Hildenbrand 
Reviewed-by: Pavel Tatashin 
Reviewed-by: Rafael J. Wysocki 
Reviewed-by: Rashmica Gupta 
Reviewed-by: Oscar Salvador 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: "Rafael J. Wysocki" 
Cc: Len Brown 
Cc: Greg Kroah-Hartman 
Cc: Boris Ostrovsky 
Cc: Juergen Gross 
Cc: Nathan Fontenot 
Cc: John Allen 
Cc: Michal Hocko 
Cc: Dan Williams 
Cc: Joonsoo Kim 
Cc: Vlastimil Babka 
Cc: Mathieu Malaterre 
Cc: Pavel Tatashin 
Cc: YASUAKI ISHIMATSU 
Cc: Balbir Singh 
Cc: Haiyang Zhang 
Cc: Heiko Carstens 
Cc: Jonathan Corbet 
Cc: Kate Stewart 
Cc: "K. Y. Srinivasan" 
Cc: Martin Schwidefsky 
Cc: Michael Neuling 
Cc: Philippe Ombredanne 
Cc: Stephen Hemminger 
Cc: Thomas Gleixner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/memory_hotplug: make remove_memory() take the device_hotplug_lock

2018-10-31T15:54:17+00:00

Patch series "mm: online/offline_pages called w.o. mem_hotplug_lock", v3.

Reading through the code and studying how mem_hotplug_lock is to be used,
I noticed that there are two places where we can end up calling
device_online()/device_offline() - online_pages()/offline_pages() without
the mem_hotplug_lock.  And there are other places where we call
device_online()/device_offline() without the device_hotplug_lock.

While e.g.
	echo "online" > /sys/devices/system/memory/memory9/state
is fine, e.g.
	echo 1 > /sys/devices/system/memory/memory9/online
Will not take the mem_hotplug_lock. However the device_lock() and
device_hotplug_lock.

E.g.  via memory_probe_store(), we can end up calling
add_memory()->online_pages() without the device_hotplug_lock.  So we can
have concurrent callers in online_pages().  We e.g.  touch in
online_pages() basically unprotected zone->present_pages then.

Looks like there is a longer history to that (see Patch #2 for details),
and fixing it to work the way it was intended is not really possible.  We
would e.g.  have to take the mem_hotplug_lock in device/base/core.c, which
sounds wrong.

Summary: We had a lock inversion on mem_hotplug_lock and device_lock().
More details can be found in patch 3 and patch 6.

I propose the general rules (documentation added in patch 6):

1. add_memory/add_memory_resource() must only be called with
   device_hotplug_lock.
2. remove_memory() must only be called with device_hotplug_lock. This is
   already documented and holds for all callers.
3. device_online()/device_offline() must only be called with
   device_hotplug_lock. This is already documented and true for now in core
   code. Other callers (related to memory hotplug) have to be fixed up.
4. mem_hotplug_lock is taken inside of add_memory/remove_memory/
   online_pages/offline_pages.

To me, this looks way cleaner than what we have right now (and easier to
verify).  And looking at the documentation of remove_memory, using
lock_device_hotplug also for add_memory() feels natural.

This patch (of 6):

remove_memory() is exported right now but requires the
device_hotplug_lock, which is not exported.  So let's provide a variant
that takes the lock and only export that one.

The lock is already held in
	arch/powerpc/platforms/pseries/hotplug-memory.c
	drivers/acpi/acpi_memhotplug.c
	arch/powerpc/platforms/powernv/memtrace.c

Apart from that, there are not other users in the tree.

Link: http://lkml.kernel.org/r/20180925091457.28651-2-david@redhat.com
Signed-off-by: David Hildenbrand 
Reviewed-by: Pavel Tatashin 
Reviewed-by: Rafael J. Wysocki 
Reviewed-by: Rashmica Gupta 
Reviewed-by: Oscar Salvador 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: "Rafael J. Wysocki" 
Cc: Len Brown 
Cc: Rashmica Gupta 
Cc: Michael Neuling 
Cc: Balbir Singh 
Cc: Nathan Fontenot 
Cc: John Allen 
Cc: Michal Hocko 
Cc: Dan Williams 
Cc: Joonsoo Kim 
Cc: Vlastimil Babka 
Cc: Greg Kroah-Hartman 
Cc: YASUAKI ISHIMATSU 
Cc: Mathieu Malaterre 
Cc: Boris Ostrovsky 
Cc: Haiyang Zhang 
Cc: Heiko Carstens 
Cc: Jonathan Corbet 
Cc: Juergen Gross 
Cc: Kate Stewart 
Cc: "K. Y. Srinivasan" 
Cc: Martin Schwidefsky 
Cc: Philippe Ombredanne 
Cc: Stephen Hemminger 
Cc: Thomas Gleixner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: remove include/linux/bootmem.h

2018-10-31T15:54:16+00:00

Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include 

@@
@@
- #include 
+ #include 

[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
  Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport 
Signed-off-by: Stephen Rothwell 
Acked-by: Michal Hocko 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Kroah-Hartman 
Cc: Guan Xuetao 
Cc: Ingo Molnar 
Cc: "James E.J. Bottomley" 
Cc: Jonas Bonn 
Cc: Jonathan Corbet 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Martin Schwidefsky 
Cc: Matt Turner 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Palmer Dabbelt 
Cc: Paul Burton 
Cc: Richard Kuo 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Serge Semin 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vineet Gupta 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ACPI / PMIC: xpower: Add depends on IOSF_MBI to Kconfig entry

2018-10-25T15:00:05+00:00

This is necessary to avoid compilation issues on non x86 systems (where the
asm/iosf_mbi.h header is not available) and on x86 systems in case IOSF_MBI
support is not enabled there.

Note that the AXP288 PMIC is connected through the LPSS i2c controller, so
either we have IOSF_MBI support selected through the X86_INTEL_LPSS option,
or we have a kernel where the OpRegion will never work anyways.

Signed-off-by: Hans de Goede 
Acked-by: Andy Shevchenko 
Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: xpower: Block P-Unit I2C access during read-modify-write

2018-10-25T15:00:05+00:00

intel_xpower_pmic_update_power() does a read-modify-write of the output
control register. The i2c-designware code blocks the P-Unit I2C access
during the read and write by taking the P-Unit's PMIC bus semaphore.
But between the read and the write that semaphore is released and the
P-Unit could make changes to the register which we then end up overwriting.

This commit makes intel_xpower_pmic_update_power() take the semaphore
itself so that it is held over the entire read-modify-write, avoiding this
race.

Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki

Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-10-25T13:50:48+00:00

Pull PCI updates from Bjorn Helgaas:

 - Fix ASPM link_state teardown on removal (Lukas Wunner)

 - Fix misleading _OSC ASPM message (Sinan Kaya)

 - Make _OSC optional for PCI (Sinan Kaya)

 - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
   (Patrick Talbert)

 - Remove x86 and arm64 node-local allocation for host bridge structures
   (Punit Agrawal)

 - Pay attention to device-specific _PXM node values (Jonathan Cameron)

 - Support new Immediate Readiness bit (Felipe Balbi)

 - Differentiate between pciehp surprise and safe removal (Lukas Wunner)

 - Remove unnecessary pciehp includes (Lukas Wunner)

 - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)

 - Tolerate PCIe Slot Presence Detect being hardwired to zero to
   workaround broken hardware, e.g., the Wilocity switch/wireless device
   (Lukas Wunner)

 - Unify pciehp controller & slot structs (Lukas Wunner)

 - Constify hotplug_slot_ops (Lukas Wunner)

 - Drop hotplug_slot_info (Lukas Wunner)

 - Embed hotplug_slot struct into users instead of allocating it
   separately (Lukas Wunner)

 - Initialize PCIe port service drivers directly instead of relying on
   initcall ordering (Keith Busch)

 - Restore PCI config state after a slot reset (Keith Busch)

 - Save/restore DPC config state along with other PCI config state
   (Keith Busch)

 - Reference count devices during AER handling to avoid race issue with
   concurrent hot removal (Keith Busch)

 - If an Upstream Port reports ERR_FATAL, don't try to read the Port's
   config space because it is probably unreachable (Keith Busch)

 - During error handling, use slot-specific reset instead of secondary
   bus reset to avoid link up/down issues on hotplug ports (Keith Busch)

 - Restore previous AER/DPC handling that does not remove and
   re-enumerate devices on ERR_FATAL (Keith Busch)

 - Notify all drivers that may be affected by error recovery resets
   (Keith Busch)

 - Always generate error recovery uevents, even if a driver doesn't have
   error callbacks (Keith Busch)

 - Make PCIe link active reporting detection generic (Keith Busch)

 - Support D3cold in PCIe hierarchies during system sleep and runtime,
   including hotplug and Thunderbolt ports (Mika Westerberg)

 - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
   are empty or occupied (Jon Derrick)

 - Remove duplicated include from pci/pcie/err.c and unused variable
   from cpqphp (YueHaibing)

 - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
   Pawandeep)

 - Uninline PCI bus accessors for better ftracing (Keith Busch)

 - Remove unused AER Root Port .error_resume method (Keith Busch)

 - Use kfifo in AER instead of a local version (Keith Busch)

 - Use threaded IRQ in AER bottom half (Keith Busch)

 - Use managed resources in AER core (Keith Busch)

 - Reuse pcie_port_find_device() for AER injection (Keith Busch)

 - Abstract AER interrupt handling to disconnect error injection (Keith
   Busch)

 - Refactor AER injection callbacks to simplify future improvments
   (Keith Busch)

 - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)

 - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)

 - Add switch fall-through annotations (Gustavo A. R. Silva)

 - Remove unused Switchtec quirk variable (Joshua Abraham)

 - Fix pci.c kernel-doc warning (Randy Dunlap)

 - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)

 - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)

 - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
   useless dmesg errors (Logan Gunthorpe)

 - Update Switchtec NTB documentation (Wesley Yung)

 - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)

 - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)

 - Add PCI support for peer-to-peer DMA (Logan Gunthorpe)

 - Add sysfs group for PCI peer-to-peer memory statistics (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
   Gunthorpe)

 - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA driver writer's documentation (Logan
   Gunthorpe)

 - Add block layer flag to indicate driver support for PCI peer-to-peer
   DMA (Logan Gunthorpe)

 - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
   memory (Logan Gunthorpe)

 - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
   Gunthorpe)

 - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
   Gunthorpe)

 - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
   Christoph Hellwig, Logan Gunthorpe)

 - Cache VF config space size to optimize enumeration of many VFs
   (KarimAllah Ahmed)

 - Remove unnecessary  include (Bjorn Helgaas)

 - Fix VMD AERSID quirk Device ID matching (Jon Derrick)

 - Fix Cadence PHY handling during probe (Alan Douglas)

 - Signal Cadence Endpoint interrupts via AXI region 0 instead of last
   region (Alan Douglas)

 - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
   Douglas)

 - Remove redundant controller tests for "device_type == pci" (Rob
   Herring)

 - Document R-Car E3 (R8A77990) bindings (Tho Vu)

 - Add device tree support for R-Car r8a7744 (Biju Das)

 - Drop unused mvebu PCIe capability code (Thomas Petazzoni)

 - Add shared PCI bridge emulation code (Thomas Petazzoni)

 - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)

 - Add aardvark Root Port emulation (Thomas Petazzoni)

 - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)

 - Add initial power management for i.MX7 (Leonard Crestez)

 - Add PME_Turn_Off support for i.MX7 (Leonard Crestez)

 - Fix qcom runtime power management error handling (Bjorn Andersson)

 - Update TI dra7xx unaligned access errata workaround for host mode as
   well as endpoint mode (Vignesh R)

 - Fix kirin section mismatch warning (Nathan Chancellor)

 - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)

 - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)

 - Update Keystone to use MRRS quirk for host bridge instead of open
   coding (Kishon Vijay Abraham I)

 - Refactor Keystone link establishment (Kishon Vijay Abraham I)

 - Simplify and speed up Keystone link training (Kishon Vijay Abraham I)

 - Remove unused Keystone host_init argument (Kishon Vijay Abraham I)

 - Merge Keystone driver files into one (Kishon Vijay Abraham I)

 - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
   Abraham I)

 - Rename Keystone functions for uniformity (Kishon Vijay Abraham I)

 - Add Keystone device control module DT binding (Kishon Vijay Abraham
   I)

 - Use SYSCON API to get Keystone control module device IDs (Kishon
   Vijay Abraham I)

 - Clean up Keystone PHY handling (Kishon Vijay Abraham I)

 - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)

 - Clean up Keystone config space access checks (Kishon Vijay Abraham I)

 - Get Keystone outbound window count from DT (Kishon Vijay Abraham I)

 - Clean up Keystone outbound window configuration (Kishon Vijay Abraham
   I)

 - Clean up Keystone DBI setup (Kishon Vijay Abraham I)

 - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)

 - Fix Keystone IRQ status checking (Kishon Vijay Abraham I)

 - Add debug messages for all Keystone errors (Kishon Vijay Abraham I)

 - Clean up Keystone includes and macros (Kishon Vijay Abraham I)

 - Fix Mediatek unchecked return value from devm_pci_remap_iospace()
   (Gustavo A. R. Silva)

 - Fix Mediatek endpoint/port matching logic (Honghui Zhang)

 - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
   Zhang)

 - Remove redundant Mediatek PM domain check (Honghui Zhang)

 - Convert Mediatek to pci_host_probe() (Honghui Zhang)

 - Fix Mediatek MSI enablement (Honghui Zhang)

 - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)

 - Add Mediatek loadable module support (Honghui Zhang)

 - Detach VMD resources after stopping root bus to prevent orphan
   resources (Jon Derrick)

 - Convert pcitest build process to that used by other tools (iio, perf,
   etc) (Gustavo Pimentel)

* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI/AER: Refactor error injection fallbacks
  PCI/AER: Abstract AER interrupt handling
  PCI/AER: Reuse existing pcie_port_find_device() interface
  PCI/AER: Use managed resource allocations
  PCI: pcie: Remove redundant 'default n' from Kconfig
  PCI: aardvark: Implement emulated root PCI bridge config space
  PCI: mvebu: Convert to PCI emulated bridge config space
  PCI: mvebu: Drop unused PCI express capability code
  PCI: Introduce PCI bridge emulated config space common logic
  PCI: vmd: Detach resources after stopping root bus
  nvmet: Optionally use PCI P2P memory
  nvmet: Introduce helper functions to allocate and free request SGLs
  nvme-pci: Add support for P2P memory in requests
  nvme-pci: Use PCI p2pmem subsystem to manage the CMB
  IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
  block: Add PCI P2P flag for request queue
  PCI/P2PDMA: Add P2P DMA driver writer's documentation
  docs-rst: Add a new directory for PCI documentation
  PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
  PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
  ...

Merge tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

2018-10-25T13:40:00+00:00

Pull EDAC updates from Borislav Petkov:
 "The EDAC tree was busier than usual this cycle as the shortlog below
  shows.

  Also, this pull request is carrying an ACPI DSM driver which is used
  to ask the platform to supply the DIMM location of a reported hardware
  error and thus simplify all the EDAC logic when trying to map the
  error address to the respective DIMM.

  Core EDAC updates:

   - amd64_edac: AMD family 0x17, models 0x10-0x2f support (Michael Jin)
     Hygon Dhyana support (Pu Wen)

   - sb_edac: New maintainer + fixes (Tony Luck) Error reporting
     improvements and fixes (Qiuxu Zhuo)

   - ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM
     error accounting (Fan Wu)

   - altera_edac: Stratix10 support and refactoring (Thor Thayer)

  Out of tree addition:

   - acpi_adxl: Address Translation interface using an ACPI DSM (Tony
     Luck)

   - the usual amount of other misc fixes and cleanups all over"

* tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits)
  ACPI/ADXL: Add address translation interface using an ACPI DSM
  EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr()
  EDAC, skx_edac: Fix logical channel intermediate decoding
  EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting
  EDAC, altera: Work around int-to-pointer-cast warnings
  EDAC, amd64: Add Hygon Dhyana support
  EDAC: Raise the maximum number of memory controllers
  arm64: dts: stratix10: Add peripheral EDAC nodes
  EDAC, altera: Add Stratix10 peripheral support
  EDAC, altera: Merge Stratix10 into the Arria10 SDRAM probe routine
  arm64: dts: stratix10: Add SDRAM node
  EDAC, altera: Combine Stratix10 and Arria10 probe functions
  arm64: dts: stratix10: Additions to EDAC System Manager
  EDAC, i7core: Remove set but not used variable pvt
  EDAC, ghes: Use CPER module handles to locate DIMMs
  EDAC: Correct DIMM capacity unit symbol
  EDAC, sb_edac: Fix signedness bugs in *_get_ha() functions
  EDAC, sb_edac: Fix reporting for patrol scrubber errors
  EDAC, sb_edac: Return early on ADDRV bit and address type test
  MAINTAINERS: Update maintainer for drivers/edac/sb_edac.c
  ...