* acpi-ec:
  ACPI / EC: Restore polling during noirq suspend/resume phases

* acpi-tables:
  ACPI: SPCR: Mark expected switch fall-through in acpi_parse_spcr

* acpi-doc:
  ACPI: dock: document sysfs interface
  ACPI / DPTF: Document dptf_power sysfs atttributes

Constify device_get_match_data() as OF and ACPI variants return
constant value.

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Do the renaming to be consistent with its sibling, i.e.
of_device_get_match_data().

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

As well as its sibling of_device_get_match_data() has no such checks,
no need to do it in acpi_get_match_data().

First of all, we are not supposed to call fwnode API like this without
driver attached.

Second, since __acpi_match_device() does check input parameter there is
no need to duplicate it outside.

And last but not least one, the API should still serve the cases when
ACPI device is enumerated via PRP0001. In such case driver has neither
ACPI table nor driver data there.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When __acpi_match_device() is called it would be possible to have
ACPI ID table a NULL pointer. To avoid potential dereference,
check for this before traverse.

While here, remove redundant 'else'.

Note, this patch implies a bit of refactoring acpi_of_match_device()
to return pointer to OF ID when matched followed by refactoring
__acpi_match_device() to return either ACPI or OF ID when matches.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1465078
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 662591461c4b (ACPI / EC: Drop EC noirq hooks to fix a
regression) modified the ACPI EC driver so that it doesn't switch
over to busy polling mode during noirq stages of system suspend and
resume in an attempt to fix an issue resulting from that behavior.

However, that modification introduced a system resume regression on
Thinkpad X240, so make the EC driver switch over to the polling mode
during noirq stages of system suspend and resume again, which
effectively reverts the problematic commit.

Fixes: 662591461c4b (ACPI / EC: Drop EC noirq hooks to fix a regression)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197863
Reported-by: Markus Demleitner <m@tfiu.de>
Tested-by: Markus Demleitner <m@tfiu.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more ACPI updates from Rafael Wysocki:
 "These are mostly fixes and cleanups, a few new quirks, a couple of
  updates related to the handling of ACPI tables and ACPICA copyrights
  refreshment.

  Specifics:

   - Update the ACPICA kernel code to upstream revision 20180105
     including:
       * Assorted fixes (Jung-uk Kim)
       * Support for X32 ABI compilation (Anuj Mittal)
       * Update of ACPICA copyrights to 2018 (Bob Moore)

   - Prepare for future modifications to avoid executing the _STA
     control method too early (Hans de Goede)

   - Make the processor performance control library code ignore _PPC
     notifications if they cannot be handled and fix up the C1 idle
     state definition when it is used as a fallback state (Chen Yu,
     Yazen Ghannam)

   - Make it possible to use the SPCR table on x86 and to replace the
     original IORT table with a new one from initrd (Prarit Bhargava,
     Shunyong Yang)

   - Add battery-related quirks for Asus UX360UA and UX410UAK and add
     quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai
     Heng Feng)

   - Address static checker warnings in the CPPC code (Gustavo Silva)

   - Avoid printing a raw pointer to the kernel log in the smart battery
     driver (Greg Kroah-Hartman)"

* tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: sbshc: remove raw pointer from printk() message
  ACPI: SPCR: Make SPCR available to x86
  ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
  ACPI / tables: Add IORT to injectable table list
  ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
  ACPICA: Update version to 20180105
  ACPICA: All acpica: Update copyrights to 2018
  ACPI / processor: Set default C1 idle state description
  ACPI / battery: Add quirk for Asus UX360UA and UX410UAK
  ACPI: processor_perflib: Do not send _PPC change notification if not ready
  ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
  ACPI / bus: Do not call _STA on battery devices with unmet dependencies
  PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
  ACPI: export acpi_bus_get_status_handle()
  ACPICA: Add a missing pair of parentheses
  ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR()
  ACPICA: Avoid NULL pointer arithmetic
  ACPICA: Linux: add support for X32 ABI compilation
  ACPI / video: Use true for boolean value

* acpi-video:
  ACPI / video: Use true for boolean value

* acpi-battery:
  ACPI / battery: Add quirk for Asus UX360UA and UX410UAK

* acpi-cppc:
  ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit