linux.git/drivers/acpi/x86, branch v6.0

ACPI: PM: x86: Print messages regarding LPS0 idle support

2022-07-26T18:53:00+00:00

Because suspend-to-idle is always supported and on x86 it is the only
way to suspend the system if S3 is not supported by the platform, the
kernel attempts to enter low-power S0 idle in the suspend-to-idle flow
regardless of whether or not the ACPI_FADT_LOW_POWER_S0 flag is set in
the FADT.  However, if that flag is not set, residency counters
associated with low-power S0 idle may not count and the platform may
refuse to put the EC into a low-power mode, for example.

For this reason, print diagnostic messages when the platform should
achieve significant energy savings in low-power S0 idle (because the
ACPI_FADT_LOW_POWER_S0 flag is set in the FADT) and when
suspend-to-idle becomes the default suspend method (because low-power
S0 idle should be equally or more efficient than S3, if available).

Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Mario Limonciello

ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset

2022-07-15T18:04:19+00:00

If the PNP0D80 device is present and its _DSM appears to be valid,
there is no reason to avoid using it even if ACPI_FADT_LOW_POWER_S0
is unset in the FADT, because suspend-to-idle may be the only way to
suspend the system if S3 is not supported by the platform, so do not
return early from lps0_device_attach() in that case.

However, still check ACPI_FADT_LOW_POWER_S0 when deciding whether or
not suspend-to-idle should be the default system suspend method.

Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Mario Limonciello

ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008

2022-07-05T18:46:21+00:00

New version of uPEP will have a separate ACPI id, add that
to the support list.

Signed-off-by: Shyam Sundar S K 
Reviewed-by: Mario Limonciello 
Signed-off-by: Rafael J. Wysocki

Merge tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

2022-03-25T19:14:39+00:00

Pull x86 platform driver updates from Hans de Goede:
  "New drivers:
    - AMD Host System Management Port (HSMP)
    - Intel Software Defined Silicon

  Removed drivers (functionality folded into other drivers):
    - intel_cht_int33fe_microb
    - surface3_button

  amd-pmc:
    - s2idle bug-fixes
    - Support for AMD Spill to DRAM STB feature

  hp-wmi:
    - Fix SW_TABLET_MODE detection method (and other fixes)
    - Support omen thermal profile policy v1

  serial-multi-instantiate:
    - Add SPI device support
    - Add support for CS35L41 amplifiers used in new laptops

  think-lmi:
    - syfs-class-firmware-attributes Certificate authentication support

  thinkpad_acpi:
    - Fixes + quirks
    - Add platform_profile support on AMD based ThinkPads

  x86-android-tablets:
    - Improve Asus ME176C / TF103C support
    - Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets

  Lots of various other small fixes and hardware-id additions"

* tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits)
  platform/x86: think-lmi: Certificate authentication support
  Documentation: syfs-class-firmware-attributes: Lenovo Certificate support
  platform/x86: amd-pmc: Only report STB errors when STB enabled
  platform/x86: amd-pmc: Drop CPU QoS workaround
  platform/x86: amd-pmc: Output error codes in messages
  platform/x86: amd-pmc: Move to later in the suspend process
  ACPI / x86: Add support for LPS0 callback handler
  platform/x86: thinkpad_acpi: consistently check fan_get_status return.
  platform/x86: hp-wmi: support omen thermal profile policy v1
  platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated
  platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
  platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
  platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)
  platform/x86: amd-pmc: Validate entry into the deepest state on resume
  platform/x86: thinkpad_acpi: Don't use test_bit on an integer
  platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable
  platform/x86: thinkpad_acpi: clean up dytc profile convert
  platform/x86: x86-android-tablets: Depend on EFI and SPI
  platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init()
  platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes
  ...

ACPI / x86: Add support for LPS0 callback handler

2022-03-17T18:47:24+00:00

Currenty the latest thing run during a suspend to idle attempt is
the LPS0 `prepare_late` callback and the earliest thing is the
`resume_early` callback.

There is a desire for the `amd-pmc` driver to suspend later in the
suspend process (ideally the very last thing), so create a callback
that it or any other driver can hook into to do this.

Signed-off-by: Mario Limonciello 
Acked-by: Rafael J. Wysocki 
Link: https://lore.kernel.org/r/20220317141445.6498-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede

ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L

2022-03-08T14:41:27+00:00

The Yoga Tablet 1050F/L is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts (the Android x86
kernel fork ignores I2C devices described in the DSDT).

Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the
acpi_quirk_skip_dmi_ids table to woraround this.

Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki

ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8

2022-03-08T14:41:27+00:00

The Nextbook Ares 8 is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts (the Android x86
kernel fork ignores I2C devices described in the DSDT).

Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the
acpi_quirk_skip_dmi_ids table to woraround this.

Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki

ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"

2022-02-07T20:02:31+00:00

Testing on various upcoming OEM systems shows commit 7b167c4cb48e ("ACPI:
PM: Only mark EC GPE for wakeup on Intel systems") was short
sighted and the symptoms were indicative of other problems. Some OEMs
do have the dedicated GPIOs for the power button but also rely upon
an interrupt to the EC SCI to let the lid work.

The original commit showed spurious activity on Lenovo systems:
     * On both Lenovo T14 and P14s the keyboard wakeup doesn't work, and
       sometimes the power button event doesn't work.

This was confirmed on my end at that time.

However further development in the kernel showed that the issue was
actually the IRQ for the GPIO controller was also shared with the EC SCI.
This was actually fixed by commit 2d54067fcd23 ("pinctrl: amd: Fix
wakeups when IRQ is shared with SCI").

The original commit also showed problems with AC adapter:
     * On HP 635 G7 detaching or attaching AC during suspend will cause
       the system not to wakeup
     * On Asus vivobook to prevent detaching AC causing resume problems
     * On Lenovo 14ARE05 to prevent detaching AC causing resume problems
     * On HP ENVY x360  to prevent detaching AC causing resume problems

Detaching AC adapter causing problems appears to have been a problem
because the EC SCI went off to notify the OS of the power adapter change
but the SCI was ignored and there was no other way to wake up this system
since GPIO controller wasn't properly enabled.  The wakeups were fixed by
enabling the GPIO controller in commit acd47b9f28e5 ("pinctrl: amd: Handle
wake-up interrupt").

I've confirmed on a variety of OEM notebooks with the following test

 1) echo 1 | sudo tee /sys/power/pm_debug_messages
 2) sudo systemctl suspend
 3) unplug AC adapter, make sure system is still asleep
 4) wake system from lid (which is provided by ACPI SCI on some of them)
 5) dmesg
    a) see the EC GPE dispatched, timekeeping for X seconds (matching ~time
       until AC adapter plug out)
    b) see timekeeping for Y seconds until woke (matching ~time from AC
       adapter until lid event)
 6) Look at /sys/kernel/debug/amd_pmc/s0ix_stats
    "Time (in us) in S0i3" = X + Y - firmware processing time

Signed-off-by: Mario Limonciello 
Tested-by: Kai-Heng Feng 
Signed-off-by: Rafael J. Wysocki

ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs

2022-01-04T14:40:49+00:00

So far all of the tablets for which the skip i2c-client/serdev enumeration
quirks have been added also all have broken ACPI AC / battery devices
extend the existing quirks for these tablets to also skip the broken
AC / battery devices.

Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki

ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper

2022-01-04T14:40:48+00:00

Some x86 ACPI boards have broken AC and battery ACPI devices in their ACPI
tables. This is often tied to these devices using certain PMICs where the
factory OS image seems to be using native charger and fuel-gauge drivers
instead.

So far both the AC and battery drivers have almost identical checks for
these PMICs including both of them having a DMI based mechanism to force
usage of the ACPI AC and battery drivers on some boards even though one
of these PMICs is present, with the same 2 boards listed in both driver's
DMI tables for this.

The only difference is that the AC driver checks for 2 PMICs and the
battery driver only for one. This has grown this way because the other
(Whiskey Cove) PMIC is only used on a few boards (3 known boards) and
although some of these do have non working ACPI battery devices, their
_STA method always returns 0, but that really should not be relied on.

This patch factors out the shared checks into a new
acpi_quirk_skip_acpi_ac_and_battery() helper and moves the AC and
battery drivers over to this new helper.

Note the DMI table is shared with acpi_quirk_skip_i2c_client_enumeration()
and acpi_quirk_skip_serdev_enumeration(), because boards needing DMI quirks
for either of these typically also have broken AC and battery ACPI devices.

The ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY quirk is not set yet on boards
already in this DMI table, to avoid introducing any functional changes
in this refactoring patch.

Besided sharing the code between the AC and battery drivers this
refactoring also moves this quirk handling to under #ifdef CONFIG_X86,
removing this x86 specific code from non x86 ACPI builds.

Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki