* intel_pstate:
  cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()

* pm-sleep:
  Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"

Revert commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups
from suspend-to-idle) as it turned out to be premature and triggered
a number of different issues on various systems.

That includes, but is not limited to, premature suspend-to-RAM aborts
on Dell XPS 13 (9343) reported by Dominik.

The issue the commit in question attempted to address is real and
will need to be taken care of going forward, but evidently more work
is needed for this purpose.

Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull more ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20170303 which adds a few minor fixes and improvements, update ACPI
  SoC drivers with new device IDs, platform-related information and
  similar, fix the register information in the xpower PMIC driver,
  introduce a concept of "always present" devices to the ACPI device
  enumeration code and use it to fix a problem with one platform, and
  fix a system resume issue related to power resources.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20170303
     which includes:
      * Minor fixes and improvements in the core code (Bob Moore,
        Seunghun Han).
      * Debugger fixes (Colin Ian King, Lv Zheng).
      * Compiler/disassembler improvements (Bob Moore, David Box, Lv
        Zheng).
      * Build-related update (Lv Zheng).

   - Add new device IDs and platform-related information to the ACPI
     drivers for Intel (LPSS) and AMD (APD) SoCs (Hanjun Guo, Hans de
     Goede).

   - Make it possible to quirk ACPI-enumerated devices as "always
     present" on platforms where they are incorrectly reported as not
     present by the AML and add the INT0002 device ID to the list of
     "always present" devices (Hans de Goede).

   - Fix the register information in the xpower PMIC driver and add
     comments to map the registers to symbols used by AML to it (Hans de
     Goede).

   - Move the code turning off unused ACPI power resources during system
     resume to a point after all devices have been resumed to avoid
     issues with power resources that do not behave as expected (Hans de
     Goede)"

* tag 'acpi-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
  ACPI / power: Delay turning off unused power resources after suspend
  ACPI / PMIC: xpower: Fix power_table addresses
  ACPI / LPSS: Call pwm_add_table() for Bay Trail PWM device
  ACPICA: Update version to 20170303
  ACPICA: iasl: add ASL conversion tool
  ACPICA: Local cache support: Allow small cache objects
  ACPICA: Disassembler: Do not unconditionally remove temporary names
  ACPICA: iasl: Fix IORT SMMU GSI disassembling
  ACPICA: Cleanup AML opcode definitions, no functional change
  ACPICA: Debugger: Add interpreter blocking mark for single-step mode
  ACPICA: debugger: fix memory leak on Pathname
  ACPICA: Update for automatic repair code for objects returned by evaluate_object
  ACPICA: Namespace: fix operand cache leak
  ACPICA: Fix several incorrect invocations of ACPICA return macro
  ACPICA: Fix a module for excessive debug output
  ACPICA: Update some function headers, no funtional change
  ACPICA: Disassembler: Enhance resource descriptor detection
  i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller
  ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller
  ACPI / bus: Add INT0002 to list of always-present devices
  ...

The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ
during suspend-to-idle transitions and, consequently, any events
signaled through it wake up the system from that state.  However,
on some systems some of the events signaled via the ACPI SCI while
suspended to idle should not cause the system to wake up.  In fact,
quite often they should just be discarded.

Arguably, systems should not resume entirely on such events, but in
order to decide which events really should cause the system to resume
and which are spurious, it is necessary to resume up to the point
when ACPI SCIs are actually handled and processed, which is after
executing dpm_resume_noirq() in the system resume path.

For this reasons, add a loop around freeze_enter() in which the
platforms can process events signaled via multiplexed IRQ lines
like the ACPI SCI and add suspend-to-idle hooks that can be
used for this purpose to struct platform_freeze_ops.

In the ACPI case, the ->wake hook is used for checking if the SCI
has triggered while suspended and deferring the interrupt-induced
system wakeup until the events signaled through it are actually
processed sufficiently to decide whether or not the system should
resume.  In turn, the ->sync hook allows all of the relevant event
queues to be flushed so as to prevent events from being missed due
to race conditions.

In addition to that, some ACPI code processing wakeup events needs
to be modified to use the "hard" version of wakeup triggers, so that
it will cause a system resume to happen on device-induced wakeup
events even if the "soft" mechanism to prevent the system from
suspending is not enabled (that also helps to catch device-induced
wakeup events occurring during suspend transitions in progress).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 660b1113e0f3 (ACPI / PM: Fix consistency check for power resources
during resume) introduced a check for ACPI power resources which have
been turned on by the BIOS during suspend and turns these back off again.

This is causing problems on a Dell Venue Pro 11 7130 (i5-4300Y) it causes
the following messages to show up in dmesg:

[  131.014605] ACPI: Waking up from system sleep state S3
[  131.150271] acpi LNXPOWER:07: Turning OFF
[  131.150323] acpi LNXPOWER:06: Turning OFF
[  131.150911] acpi LNXPOWER:00: Turning OFF
[  131.169014] ACPI : EC: interrupt unblocked
[  131.181811] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  133.535728] pci_raw_set_power_state: 76 callbacks suppressed
[  133.535735] iwlwifi 0000:01:00.0: Refused to change power state,
               currently in D3
[  133.597672] PM: noirq resume of devices complete after 2428.891 msecs

Followed by a bunch of iwlwifi errors later on and the pcie device
dropping from the bus (acpiphp thinks it has been unplugged).

Disabling the turning off of unused power resources fixes this. Instead
of adding a quirk for this system, this commit fixes this by moving the
disabling of unused power resources to later in the resume sequence
when the iwlwifi card has been moved out of D3 so the ref_count for
its power resource no longer is 0.

This new behavior seems to match the intend of the original commit which
commit-msg says: "(... which means that no devices are going to need them
any time soon) and we should turn them off".

This also avoids power resources which we need when bringing devices out
of D3 from getting bounced off and then back on again.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In commit 821d6f0359b0 (ACPI / sleep: Do not save NVS for new machines to
accelerate S3), to optimize S3 suspend/resume speed, code is introduced
to ignore NVS memory saving during S3 for all the platforms later than
2012.

But, Lenovo G50-45, a platform released in 2015, still needs NVS memory
saving during S3. A quirk is introduced for this platform.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=189431
Tested-by: Przemek <soprwa@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Drop unnecessary code ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* pm-sleep:
  Revert "PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag"

* pm-cpufreq:
  cpufreq: intel_pstate: Fix sysfs limits enforcement for performance policy

Revert commit 08b98d329165 (PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0
flag) as it caused system suspend (in the default configuration) to fail
on Dell XPS13 (9360) with the Kaby Lake processor.

Fixes: 08b98d329165 (PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag)
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* pm-sleep:
  PM / sleep: Print active wakeup sources when blocking on wakeup_count reads
  x86/suspend: fix false positive KASAN warning on suspend/resume
  PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag
  PM / sleep: System sleep state selection interface rework
  PM / hibernate: Verify the consistent of e820 memory map by md5 digest

* powercap:
  powercap / RAPL: Add Knights Mill CPUID
  powercap/intel_rapl: fix and tidy up error handling
  powercap/intel_rapl: Track active CPUs internally
  powercap/intel_rapl: Cleanup duplicated init code
  powercap/intel rapl: Convert to hotplug state machine
  powercap/intel_rapl: Propagate error code when registration fails
  powercap/intel_rapl: Add missing domain data update on hotplug

* acpi-sleep-fixes:
  Revert "ACPI: Execute _PTS before system reboot"

* acpi-wdat-fixes:
  watchdog: wdat_wdt: Select WATCHDOG_CORE