linux.git/drivers/acpi/internal.h, branch v5.5

ACPI: EC: add support for hardware-reduced systems

2019-10-28T15:00:09+00:00

As defined in the ACPI spec section 12.11, ACPI hardware-reduced
platforms define the EC SCI interrupt as a GpioInt in the _CRS object.

This replaces the previous way of using a GPE for this interrupt;
GPE blocks are not available on reduced hardware platforms.

Add support for handling this interrupt as an EC event source, and
avoid GPE usage on reduced hardware platforms.

This enables the use of several media keys (e.g. screen brightness
up/down) on Asus UX434DA.

Signed-off-by: Daniel Drake 
Signed-off-by: Rafael J. Wysocki

ACPI: EC: PM: Consolidate some code depending on PM_SLEEP

2019-08-08T09:25:43+00:00

Move some routines, including acpi_ec_dispatch_gpe(), that are only
used if CONFIG_PM_SLEEP is set to the #ifdef block containing the EC
suspend and resume callbacks, to make the "full EC PM picture" easier
to follow.

While at it, move the header of acpi_ec_dispatch_gpe() in the
header file to a CONFIG_PM_SLEEP #ifdef block.

Signed-off-by: Rafael J. Wysocki 
Tested-by: Kai-Heng Feng

ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events()

2019-08-08T09:25:37+00:00

Change acpi_ec_suspend() to use pm_suspend_no_platform() instead of
acpi_sleep_no_ec_events(), which allows the latter to be eliminated
along with the s2idle_in_progress variable which is only used by it.

Signed-off-by: Rafael J. Wysocki 
Tested-by: Kai-Heng Feng

ACPI: PM: Set up EC GPE for system wakeup from drivers that need it

2019-07-30T10:26:21+00:00

The EC GPE needs to be set up for system wakeup only if there is a
driver depending on it, either intel-hid or intel-vbtn, bound to a
button device that is expected to wake up the system from sleep (such
as the power button on some Dell systems, like the XPS13 9360).  It
doesn't need to be set up for waking up the system from sleep in any
other cases and whether or not it is expected to wake up the system
from sleep doesn't depend on whether or not the LPS0 device is
present in the ACPI namespace.

For this reason, rearrange the ACPI suspend-to-idle code to make the
drivers depending on the EC GPE wakeup take care of setting it up and
decouple that from the LPS0 device handling.

While at it, make intel-hid and intel-vbtn prepare for system wakeup
only if they are allowed to wake up the system from sleep by user
space (via sysfs).

[Note that acpi_ec_mark_gpe_for_wake() and acpi_ec_set_gpe_wake_mask()
 are there to prevent the EC GPE from being disabled by the
 acpi_enable_all_wakeup_gpes() call in acpi_s2idle_prepare(), so on
 systems with either intel-hid or intel-vbtn this change doesn't
 affect any interactions with the hardware or platform firmware.]

Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Andy Shevchenko

ACPI: EC: Return bool from acpi_ec_dispatch_gpe()

2019-07-23T07:46:20+00:00

On some systems, if suspend-to-idle is used, the EC may signal system
wakeup events (power button events, for example) as well as events
that should not cause the system to resume and acpi_ec_dispatch_gpe()
needs to be called to determine whether or not the system should
resume then.  In particular, if acpi_ec_dispatch_gpe() doesn't detect
any EC events at all, the system should remain suspended, so it is
useful to know when that is the case.

For this reason, make acpi_ec_dispatch_gpe() return a bool value
indicating whether or not any EC events have been detected by it.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Thomas Gleixner

ACPI: PM: Unexport acpi_device_get_power()

2019-07-04T08:49:57+00:00

Using acpi_device_get_power() outside of ACPI device initialization
and ACPI sysfs is problematic due to the way in which power resources
are handled by it, so unexport it and add a paragraph explaining the
pitfalls to its kerneldoc comment.

Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Mika Westerberg

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288

2019-06-05T15:36:37+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 263 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Alexios Zavras 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman

ACPI: EC: Clean up probing for early EC

2019-01-29T10:01:30+00:00

Both acpi_ec_dsdt_probe() and acpi_ec_ecdt_probe() may be void as
their return values are ignored anyway.  This allows a couple of
gotos and labels to go away from there.

Moreover, acpi_ec_ecdt_probe() only needs to allocate the ec
object after getting the ECDT pointer and checking it, so the
pointless memory allocation and release on systems without the
ECDT can be avoided by reordering it.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki

ACPI / LPSS: Make PCI dependency explicit

2019-01-15T22:16:18+00:00

After commit 5d32a66541c4 (PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set), it is possible to build ACPI without any PCI support.

This code depends on PCI. Compile only when PCI is present.

Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Signed-off-by: Sinan Kaya 
Signed-off-by: Rafael J. Wysocki

Merge tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2018-12-25T23:01:46+00:00

Pull device properties framework updates from Rafael Wysocki:
 "This introduces 'software nodes' that are analogous to the DT and ACPI
  firmware nodes except that they can be created by drivers themselves
  and do a couple of assorted cleanups.

  Specifics:

   - Introduce "software nodes", analogous to the DT and ACPI firmware
     nodes except that they can be created by kernel code, in order to
     complement fwnodes representing real firmware nodes when they are
     incomplete (for example missing device properties) and to supply
     the primary fwnode when the firmware lacks hardware description for
     a device completely, and replace the "property_set" struct
     fwnode_handle type with software nodes (Heikki Krogerus).

   - Clean up the just introduced software nodes support and fix a
     commet in the graph-handling code (Colin Ian King, Marco Felsch)"

* tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: fix fwnode_graph_get_next_endpoint() documentation
  drivers: base: swnode: remove need for a temporary string for the node name
  device property: Remove struct property_set
  device property: Move device_add_properties() to swnode.c
  drivers: base: Introducing software nodes to the firmware node framework
  ACPI / glue: Add acpi_platform_notify() function
  drivers core: Prepare support for multiple platform notifications
  driver core: platform: Remove duplicated device_remove_properties() call