linux.git/drivers/acpi/device_pm.c, branch v5.5

ACPI: PM: Avoid attaching ACPI PM domain to certain devices

2019-12-09T23:22:18+00:00

Certain ACPI-enumerated devices represented as platform devices in
Linux, like fans, require special low-level power management handling
implemented by their drivers that is not in agreement with the ACPI
PM domain behavior.  That leads to problems with managing ACPI fans
during system-wide suspend and resume.

For this reason, make acpi_dev_pm_attach() skip the affected devices
by adding a list of device IDs to avoid to it and putting the IDs of
the affected devices into that list.

Fixes: e5cc8ef31267 (ACPI / PM: Provide ACPI PM callback routines for subsystems)
Reported-by: Zhang Rui 
Tested-by: Todd Brandt 
Cc: 3.10+  # 3.10+
Signed-off-by: Rafael J. Wysocki

Merge branches 'pm-opp', 'pm-qos', 'acpi-pm', 'pm-domains' and 'pm-tools'

2019-09-17T07:49:19+00:00

* pm-opp:
  PM / OPP: Correct Documentation about library location
  opp: of: Support multiple suspend OPPs defined in DT
  dt-bindings: opp: Support multiple opp-suspend properties
  opp: core: add regulators enable and disable
  opp: Don't decrement uninitialized list_kref

* pm-qos:
  PM: QoS: Get rid of unused flags

* acpi-pm:
  ACPI: PM: Print debug messages on device power state changes

* pm-domains:
  PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
  PM / Domains: Simplify genpd_lookup_dev()
  PM / Domains: Align in-parameter names for some genpd functions

* pm-tools:
  pm-graph: make setVal unbuffered again for python2 and python3
  cpupower: update German translation
  tools/power/cpupower: fix 64bit detection when cross-compiling
  cpupower: Add missing newline at end of file
  pm-graph v5.5

PM / wakeup: Show wakeup sources stats in sysfs

2019-08-20T22:20:40+00:00

Add an ID and a device pointer to 'struct wakeup_source'. Use them to to
expose wakeup sources statistics in sysfs under
/sys/class/wakeup/wakeup/*.

Co-developed-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman 
Co-developed-by: Stephen Boyd 
Signed-off-by: Stephen Boyd 
Signed-off-by: Tri Vo 
Tested-by: Kalesh Singh 
Signed-off-by: Rafael J. Wysocki

ACPI: PM: Print debug messages on device power state changes

2019-08-08T09:32:51+00:00

Add an acpi_handle_debug() statement to acpi_device_set_power() to
allow ACPI device power state changes to be tracked.

Signed-off-by: Rafael J. Wysocki

ACPI: PM: Fix regression in acpi_device_set_power()

2019-08-01T21:39:17+00:00

Commit f850a48a0799 ("ACPI: PM: Allow transitions to D0 to occur in
special cases") overlooked the fact that acpi_power_transition() may
change the power.state value for the target device and if that
happens, it may confuse acpi_device_set_power() and cause it to
omit the _PS0 evaluation which on some systems is necessary to
change power states of devices from low-power to D0.

Fix that by saving the current value of power.state for the
target device before passing it to acpi_power_transition() and
using the saved value in a subsequent check.

Fixes: f850a48a0799 ("ACPI: PM: Allow transitions to D0 to occur in special cases")
Reported-by: Kai-Heng Feng 
Reported-by: Mario Limonciello 
Signed-off-by: Rafael J. Wysocki 
Tested-by: Kai-Heng Feng 
Tested-by: Mario Limonciello

Merge branch 'pm-sleep'

2019-07-08T08:51:25+00:00

* pm-sleep:
  PM: sleep: Drop dev_pm_skip_next_resume_phases()
  ACPI: PM: Drop unused function and function header
  ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
  ACPI: PM: Simplify and fix PM domain hibernation callbacks
  PCI: PM: Simplify bus-level hibernation callbacks
  PM: ACPI/PCI: Resume all devices during hibernation
  kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
  PM: sleep: Update struct wakeup_source documentation
  drivers: base: power: remove wakeup_sources_stats_dentry variable
  PM: suspend: Rename pm_suspend_via_s2idle()
  PM: sleep: Show how long dpm_suspend_start() and dpm_suspend_end() take
  PM: hibernate: powerpc: Expose pfn_is_nosave() prototype

Merge branches 'acpi-pm' and 'pm-pci'

2019-07-08T08:49:36+00:00

* acpi-pm:
  ACPI: PM: Make acpi_sleep_state_supported() non-static
  ACPI: PM: Allow transitions to D0 to occur in special cases
  ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
  ACPI / sleep: Switch to use acpi_dev_get_first_match_dev()
  ACPI / LPIT: Correct LPIT end address for lpit_process()

* pm-pci:
  ACPI: PM: Unexport acpi_device_get_power()
  PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
  PCI / ACPI: Add _PR0 dependent devices
  ACPI / PM: Introduce concept of a _PR0 dependent device
  PCI / ACPI: Use cached ACPI device state to get PCI device power state
  PCI: Do not poll for PME if the device is in D3cold
  PCI: Add missing link delays required by the PCIe spec
  PCI: PM: Replace pci_dev_keep_suspended() with two functions
  PCI: PM: Avoid resuming devices in D3hot during system suspend

ACPI: PM: Unexport acpi_device_get_power()

2019-07-04T08:49:57+00:00

Using acpi_device_get_power() outside of ACPI device initialization
and ACPI sysfs is problematic due to the way in which power resources
are handled by it, so unexport it and add a paragraph explaining the
pitfalls to its kerneldoc comment.

Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Mika Westerberg

ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS

2019-07-02T22:13:24+00:00

In general, it is not correct to call pm_generic_suspend(),
pm_generic_suspend_late() and pm_generic_suspend_noirq() during the
hibernation's "poweroff" transition, because device drivers may
provide special callbacks to be invoked then and the wrappers in
question cause system suspend callbacks to be run.  Unfortunately,
that happens in the ACPI PM domain and ACPI LPSS.

To address this potential issue, introduce "poweroff" callbacks
for the ACPI PM and LPSS that will use pm_generic_poweroff(),
pm_generic_poweroff_late() and pm_generic_poweroff_noirq() as
appropriate.

Fixes: 05087360fd7a (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Mika Westerberg 
Reviewed-by: Hans de Goede

ACPI: PM: Simplify and fix PM domain hibernation callbacks

2019-07-02T22:13:24+00:00

First, after a previous change causing all runtime-suspended devices
in the ACPI PM domain (and ACPI LPSS devices) to be resumed before
creating a snapshot image of memory during hibernation, it is not
necessary to worry about the case in which them might be left in
runtime-suspend any more, so get rid of the code related to that from
ACPI PM domain and ACPI LPSS hibernation callbacks.

Second, it is not correct to use pm_generic_resume_early() and
acpi_subsys_resume_noirq() in hibernation "restore" callbacks (which
currently happens in the ACPI PM domain and ACPI LPSS), so introduce
proper _restore_late and _restore_noirq callbacks for the ACPI PM
domain and ACPI LPSS.

Fixes: 05087360fd7a (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Mika Westerberg 
Reviewed-by: Hans de Goede