The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The cpufreq code can be in a loadable module, so the architecture support
for it has to be exported:

ERROR: modpost: "acpi_arch_thermal_cpufreq_pctg" [drivers/acpi/processor.ko] undefined!

Fixes: 310293a2b941 ("ACPI: processor: reduce CPUFREQ thermal reduction pctg for Tegra241")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Current implementation of processor_thermal performs software throttling
in fixed steps of "20%" which can be too coarse for some platforms.
We observed some performance gain after reducing the throttle percentage.
Change the CPUFREQ thermal reduction percentage and maximum thermal steps
to be configurable. Also, update the default values of both for Nvidia
Tegra241 (Grace) SoC. The thermal reduction percentage is reduced to "5%"
and accordingly the maximum number of thermal steps are increased as they
are derived from the reduction percentage.

Signed-off-by: Srikar Srimath Tirumala <srikars@nvidia.com>
Co-developed-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently the ACPI code doesn't bump the reference count of
the firmware node, while OF counter part does. Not that it's
a problem right now, since ACPI doesn't really use the reference
counting for firmware nodes, it still makes sense to make code
robust against any changes done there. For this,
 - switch ACPI case to use device_set_node() to be unified with OF
 - move reference counting to amba_device_add()
 - switch to use firmware nodes instead of OF ones

In the result we will have reference counting done in the same module
for all callers independently on the nature of firmware node behind.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231006145732.3419115-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rob Herring <robh@kernel.org>

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  changes for 6.6-rc1.

  Stuff all over the place here, lots of driver updates and changes and
  new additions. Short summary is:

   - new IIO drivers and updates

   - Interconnect driver updates

   - fpga driver updates and additions

   - fsi driver updates

   - mei driver updates

   - coresight driver updates

   - nvmem driver updates

   - counter driver updates

   - lots of smaller misc and char driver updates and additions

  All of these have been in linux-next for a long time with no reported
  problems"

* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
  nvmem: core: Notify when a new layout is registered
  nvmem: core: Do not open-code existing functions
  nvmem: core: Return NULL when no nvmem layout is found
  nvmem: core: Create all cells before adding the nvmem device
  nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
  dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
  dt-bindings: nvmem: Add compatible for QCM2290
  nvmem: Kconfig: Fix typo "drive" -> "driver"
  nvmem: Explicitly include correct DT includes
  nvmem: add new NXP QorIQ eFuse driver
  dt-bindings: nvmem: Add t1023-sfp efuse support
  dt-bindings: nvmem: qfprom: Add compatible for MSM8226
  nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
  nvmem: qfprom: do some cleanup
  nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
  nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
  nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
  nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
  nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
  ...

Pull ACPI updates from Rafael Wysocki:
 "These include new ACPICA material, a rework of the ACPI thermal
  driver, a switch-over of the ACPI processor driver to using _OSC
  instead of (long deprecated) _PDC for CPU initialization, a rework of
  firmware notifications handling in several drivers, fixes and cleanups
  for suspend-to-idle handling on AMD systems, ACPI backlight driver
  updates and more.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20230628
     including the following changes:
      - Suppress a GCC 12 dangling-pointer warning (Philip Prindeville)
      - Reformat the ACPI_STATE_COMMON macro and its users (George Guo)
      - Replace the ternary operator with ACPI_MIN() (Jiangshan Yi)
      - Add support for _DSC as per ACPI 6.5 (Saket Dumbre)
      - Remove a duplicate macro from zephyr header (Najumon B.A)
      - Add data structures for GED and _EVT tracking (Jose Marinho)
      - Fix misspelled CDAT DSMAS define (Dave Jiang)
      - Simplify an error message in acpi_ds_result_push() (Christophe
        Jaillet)
      - Add a struct size macro related to SRAT (Dave Jiang)
      - Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar)
      - Add support for RISC-V external interrupt controllers in MADT
        (Sunil V L)
      - Add RHCT flags, CMO and MMU nodes (Sunil V L)
      - Change ACPICA version to 20230628 (Bob Moore)

   - Introduce new wrappers for ACPICA notify handler install/remove and
     convert multiple drivers to using their own Notify() handlers
     instead of the ACPI bus type .notify() slated for removal (Michal
     Wilczynski)

   - Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
     (Hans de Goede)

   - Put ACPI video and its child devices explicitly into D0 on boot to
     avoid platform firmware confusion (Kai-Heng Feng)

   - Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby)

   - Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao)

   - Convert ACPI CPU initialization to using _OSC instead of _PDC that
     has been depreceted since 2018 and dropped from the specification
     in ACPI 6.5 (Michal Wilczynski, Rafael Wysocki)

   - Drop non-functional nocrt parameter from ACPI thermal (Mario
     Limonciello)

   - Clean up the ACPI thermal driver, rework the handling of firmware
     notifications in it and make it provide a table of generic trip
     point structures to the core during initialization (Rafael Wysocki)

   - Defer enumeration of devices with _DEP pointing to IVSC (Wentong
     Wu)

   - Install SystemCMOS address space handler for ACPI000E (TAD) to meet
     platform firmware expectations on some platforms (Zhang Rui)

   - Fix finding the generic error data in the ACPi extlog driver for
     compatibility with old and new firmware interface versions
     (Xiaochun Lee)

   - Remove assorted unused declarations of functions (Yue Haibing)

   - Move AMBA bus scan handling into arm64 specific directory (Sudeep
     Holla)

   - Fix and clean up suspend-to-idle interface for AMD systems (Mario
     Limonciello, Andy Shevchenko)

   - Fix string truncation warning in pnpacpi_add_device() (Sunil V L)"

* tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (66 commits)
  ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
  ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
  ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
  ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
  ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
  ACPI: x86: s2idle: Post-increment variables when getting constraints
  ACPI: Adjust #ifdef for *_lps0_dev use
  ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
  ACPI: Remove assorted unused declarations of functions
  ACPI: extlog: Fix finding the generic error data for v3 structure
  PNP: ACPI: Fix string truncation warning
  ACPI: Remove unused extern declaration acpi_paddr_to_node()
  ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
  ACPI: video: Put ACPI video and its child devices into D0 on boot
  ACPI: processor: LoongArch: Get physical ID from MADT
  ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
  ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
  ACPI: thermal: Drop unnecessary thermal zone callbacks
  ACPI: thermal: Rework thermal_get_trend()
  ACPI: thermal: Use trip point table to register thermal zones
  ...

Pull arm64 updates from Will Deacon:
 "I think we have a bit less than usual on the architecture side, but
  that's somewhat balanced out by a large crop of perf/PMU driver
  updates and extensions to our selftests.

  CPU features and system registers:

   - Advertise hinted conditional branch support (FEAT_HBC) to userspace

   - Avoid false positive "SANITY CHECK" warning when xCR registers
     differ outside of the length field

  Documentation:

   - Fix macro name typo in SME documentation

  Entry code:

   - Unmask exceptions earlier on the system call entry path

  Memory management:

   - Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
     and pte_modify()

  Perf and PMU drivers:

   - Initial support for Coresight TRBE devices on ACPI systems (the
     coresight driver changes will come later)

   - Fix hw_breakpoint single-stepping when called from bpf

   - Fixes for DDR PMU on i.MX8MP SoC

   - Add NUMA-awareness to Hisilicon PCIe PMU driver

   - Fix locking dependency issue in Arm DMC620 PMU driver

   - Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver

   - Add support for Arm CMN-700 r3 parts to the CMN PMU driver

   - Add support for recent Arm Cortex CPU PMUs

   - Update Hisilicon PMU maintainers

  Selftests:

   - Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
     SHA1, etc)

   - Fix SSVE test to leave streaming-mode after grabbing the signal
     context

   - Add new test for SVE vector-length changes with SME enabled

  Miscellaneous:

   - Allow compiler to warn on suspicious looking system register
     expressions

   - Work around SDEI firmware bug by aborting any running handlers on a
     kernel crash

   - Fix some harmless warnings when building with W=1

   - Remove some unused function declarations

   - Other minor fixes and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
  drivers/perf: hisi: Update HiSilicon PMU maintainers
  arm_pmu: acpi: Add a representative platform device for TRBE
  arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
  kselftest/arm64: Fix hwcaps selftest build
  hw_breakpoint: fix single-stepping when using bpf_overflow_handler
  arm64/sysreg: refactor deprecated strncpy
  kselftest/arm64: add jscvt feature to hwcap test
  kselftest/arm64: add pmull feature to hwcap test
  kselftest/arm64: add AES feature check to hwcap test
  kselftest/arm64: add SHA1 and related features to hwcap test
  arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
  kselftest/arm64: build BTI tests in output directory
  perf/imx_ddr: don't enable counter0 if none of 4 counters are used
  perf/imx_ddr: speed up overflow frequency of cycle
  drivers/perf: hisi: Schedule perf session according to locality
  kselftest/arm64: fix a memleak in zt_regs_run()
  perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
  perf/smmuv3: Add MODULE_ALIAS for module auto loading
  perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
  kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
  ...

Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU
disable control sometimes fail to disable the counters. This will lead
to error or inaccurate data since before we enable the counters the
counter's still counting for the event used in last perf session.

This patch tries to fix this by hardening the global disable process.
Before disable the PMU, writing an invalid event type (0xffff) to
focibly stop the counters. Correspondingly restore each events on
pmu::pmu_enable().

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

Commit fcea0ccf4fd7 ("ACPI: bus: Consolidate all arm specific
initialisation into acpi_arm_init()") moved all of the ARM-specific
initialization into acpi_arm_init(). However, acpi_amba.c being outside
of drivers/acpi/arm64 got ignored and hence acpi_amba_init() was not
moved into acpi_arm_init().

Move the AMBA platform bus support into arm64 specific folder and make
acpi_amba_init() part of acpi_arm_init().

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

According to the ARM IORT specifications DEN 0049 issue E,
the "Number of IDs" field in the ID mapping format reports
the number of IDs in the mapping range minus one.

In iort_node_get_rmr_info(), we erroneously skip ID mappings
whose "Number of IDs" equal to 0, resulting in valid mapping
nodes with a single ID to map being skipped, which is wrong.

Fix iort_node_get_rmr_info() by removing the bogus id_count
check.

Fixes: 491cf4a6735a ("ACPI/IORT: Add support to retrieve IORT RMR reserved regions")
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 6.0.x
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1689593625-45213-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>