Address issue observed on real world system with suboptimal IORT table
where DMA masks of PCI devices would get set to 0 as result.

iort_dma_setup() would query the root complex'/named component IORT
entry for a DMA mask, and use that over the one the device has been
configured with earlier.

Ideally we want to use the minimum mask of what the IORT contains for
the root complex and what the device was configured with.

Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210122012419.95010-1-mdf@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

* arm64/for-next/fixes: (26 commits)
  arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
  arm64: mte: Fix typo in macro definition
  arm64: entry: fix EL1 debug transitions
  arm64: entry: fix NMI {user, kernel}->kernel transitions
  arm64: entry: fix non-NMI kernel<->kernel transitions
  arm64: ptrace: prepare for EL1 irq/rcu tracking
  arm64: entry: fix non-NMI user<->kernel transitions
  arm64: entry: move el1 irq/nmi logic to C
  arm64: entry: prepare ret_to_user for function call
  arm64: entry: move enter_from_user_mode to entry-common.c
  arm64: entry: mark entry code as noinstr
  arm64: mark idle code as noinstr
  arm64: syscall: exit userspace before unmasking exceptions
  arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
  arm64: pgtable: Fix pte_accessible()
  ACPI/IORT: Fix doc warnings in iort.c
  arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
  arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver
  arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list
  arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist
  ...

# Conflicts:
#	arch/arm64/include/asm/exception.h
#	arch/arm64/kernel/sdei.c

Fix following warnings caused by mismatch between
function parameters and function comments.

drivers/acpi/arm64/iort.c:55: warning: Function parameter or member 'iort_node' not described in 'iort_set_fwnode'
drivers/acpi/arm64/iort.c:55: warning: Excess function parameter 'node' description in 'iort_set_fwnode'
drivers/acpi/arm64/iort.c:682: warning: Function parameter or member 'id' not described in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:682: warning: Function parameter or member 'bus_token' not described in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:682: warning: Excess function parameter 'req_id' description in 'iort_get_device_domain'
drivers/acpi/arm64/iort.c:1142: warning: Function parameter or member 'dma_size' not described in 'iort_dma_setup'
drivers/acpi/arm64/iort.c:1142: warning: Excess function parameter 'size' description in 'iort_dma_setup'
drivers/acpi/arm64/iort.c:1534: warning: Function parameter or member 'ops' not described in 'iort_add_platform_device'

Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20201014093139.1580-1-shiju.jose@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

We recently introduced a 1 GB sized ZONE_DMA to cater for platforms
incorporating masters that can address less than 32 bits of DMA, in
particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has
peripherals that can only address up to 1 GB (and its PCIe host
bridge can only access the bottom 3 GB)

Instructing the DMA layer about these limitations is straight-forward,
even though we had to fix some issues regarding memory limits set in
the IORT for named components, and regarding the handling of ACPI _DMA
methods. However, the DMA layer also needs to be able to allocate
memory that is guaranteed to meet those DMA constraints, for bounce
buffering as well as allocating the backing for consistent mappings.

This is why the 1 GB ZONE_DMA was introduced recently. Unfortunately,
it turns out the having a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes
problems with kdump, and potentially in other places where allocations
cannot cross zone boundaries. Therefore, we should avoid having two
separate DMA zones when possible.

So let's do an early scan of the IORT, and only create the ZONE_DMA
if we encounter any devices that need it. This puts the burden on
the firmware to describe such limitations in the IORT, which may be
redundant (and less precise) if _DMA methods are also being provided.
However, it should be noted that this situation is highly unusual for
arm64 ACPI machines. Also, the DMA subsystem still gives precedence to
the _DMA method if implemented, and so we will not lose the ability to
perform streaming DMA outside the ZONE_DMA if the _DMA method permits
it.

[nsaenz: unified implementation with DT's counterpart]

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20201119175400.9995-7-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull dma-mapping updates from Christoph Hellwig:

 - rework the non-coherent DMA allocator

 - move private definitions out of <linux/dma-mapping.h>

 - lower CMA_ALIGNMENT (Paul Cercueil)

 - remove the omap1 dma address translation in favor of the common code

 - make dma-direct aware of multiple dma offset ranges (Jim Quinlan)

 - support per-node DMA CMA areas (Barry Song)

 - increase the default seg boundary limit (Nicolin Chen)

 - misc fixes (Robin Murphy, Thomas Tai, Xu Wang)

 - various cleanups

* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
  ARM/ixp4xx: add a missing include of dma-map-ops.h
  dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
  dma-direct: factor out a dma_direct_alloc_from_pool helper
  dma-direct check for highmem pages in dma_direct_alloc_pages
  dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
  dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
  dma-mapping: move dma-debug.h to kernel/dma/
  dma-mapping: remove <asm/dma-contiguous.h>
  dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
  dma-contiguous: remove dma_contiguous_set_default
  dma-contiguous: remove dev_set_cma_area
  dma-contiguous: remove dma_declare_contiguous
  dma-mapping: split <linux/dma-mapping.h>
  cma: decrease CMA_ALIGNMENT lower limit to 2
  firewire-ohci: use dma_alloc_pages
  dma-iommu: implement ->alloc_noncoherent
  dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
  dma-mapping: add a new dma_alloc_pages API
  dma-mapping: remove dma_cache_sync
  53c700: convert to dma_alloc_noncoherent
  ...

Pull ACPI updates from Rafael Wysocki:
 "These add support for generic initiator-only proximity domains to the
  ACPI NUMA code and the architectures using it, clean up some
  non-ACPICA code referring to debug facilities from ACPICA, reduce the
  overhead related to accessing GPE registers, add a new DPTF (Dynamic
  Power and Thermal Framework) participant driver, update the ACPICA
  code in the kernel to upstream revision 20200925, add a new ACPI
  backlight whitelist entry, fix a few assorted issues and clean up some
  code.

  Specifics:

   - Add support for generic initiator-only proximity domains to the
     ACPI NUMA code and the architectures using it (Jonathan Cameron)

   - Clean up some non-ACPICA code referring to debug facilities from
     ACPICA that are not actually used in there (Hanjun Guo)

   - Add new DPTF driver for the PCH FIVR participant (Srinivas
     Pandruvada)

   - Reduce overhead related to accessing GPE registers in ACPICA and
     the OS interface layer and make it possible to access GPE registers
     using logical addresses if they are memory-mapped (Rafael Wysocki)

   - Update the ACPICA code in the kernel to upstream revision 20200925
     including changes as follows:
      + Add predefined names from the SMBus sepcification (Bob Moore)
      + Update acpi_help UUID list (Bob Moore)
      + Return exceptions for string-to-integer conversions in iASL (Bob
        Moore)
      + Add a new "ALL <NameSeg>" debugger command (Bob Moore)
      + Add support for 64 bit risc-v compilation (Colin Ian King)
      + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)

   - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
     Hung)

   - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
     Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)

   - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)

   - Add missing config_item_put() to fix refcount leak (Hanjun Guo)

   - Drop lefrover field from struct acpi_memory_device (Hanjun Guo)

   - Make the ACPI extlog driver check for RDMSR failures (Ben
     Hutchings)

   - Fix handling of lid state changes in the ACPI button driver when
     input device is closed (Dmitry Torokhov)

   - Fix several assorted build issues (Barnabás Pőcze, John Garry,
     Nathan Chancellor, Tian Tao)

   - Drop unused inline functions and reduce code duplication by using
     kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)

   - Serialize tools/power/acpi Makefile (Thomas Renninger)"

* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
  ACPICA: Update version to 20200925 Version 20200925
  ACPICA: Remove unnecessary semicolon
  ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
  ACPICA: iASL: Return exceptions for string-to-integer conversions
  ACPICA: acpi_help: Update UUID list
  ACPICA: Add predefined names found in the SMBus sepcification
  ACPICA: Tree-wide: fix various typos and spelling mistakes
  ACPICA: Drop the repeated word "an" in a comment
  ACPICA: Add support for 64 bit risc-v compilation
  ACPI: button: fix handling lid state changes when input device closed
  tools/power/acpi: Serialize Makefile
  ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
  ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
  ACPI / extlog: Check for RDMSR failure
  ACPI: Make acpi_evaluate_dsm() prototype consistent
  docs: mm: numaperf.rst Add brief description for access class 1.
  node: Add access1 class to represent CPU to memory characteristics
  ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
  ACPI: Let ACPI know we support Generic Initiator Affinity Structures
  x86: Support Generic Initiator only proximity domains
  ...

Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers.  That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.

Signed-off-by: Christoph Hellwig <hch@lst.de>

Several ACPI static tables contain references to proximity domains.

ACPI 6.3 has clarified that only entries in SRAT may define a new
domain (sec 5.2.16).

Those tables described in the ACPI spec have additional clarifying text.

NFIT: Table 5-132,

"Integer that represents the proximity domain to which the memory
 belongs. This number must match with corresponding entry in the
 SRAT table."

HMAT: Table 5-145,

"... This number must match with the corresponding entry in the SRAT
 table's processor affinity structure ... if the initiator is a processor,
 or the Generic Initiator Affinity Structure if the initiator is a generic
 initiator".

IORT and DMAR are defined by external specifications.

Intel Virtualization Technology for Directed I/O Rev 3.1 does not make any
explicit statements, but the general SRAT statement above will still apply.
https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf

IO Remapping Table, Platform Design Document rev D, also makes not explicit
statement, but refers to ACPI SRAT table for more information and again the
generic SRAT statement above applies.
https://developer.arm.com/documentation/den0049/d/

In conclusion, any proximity domain specified in these tables, should be a
reference to a proximity domain also found in SRAT, and they should not be
able to instantiate a new domain.  Hence we switch to pxm_to_node() which
will only return existing nodes.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The new field 'dma_range_map' in struct device is used to facilitate the
use of single or multiple offsets between mapping regions of cpu addrs and
dma addrs.  It subsumes the role of "dev->dma_pfn_offset" which was only
capable of holding a single uniform offset and had no region bounds
checking.

The function of_dma_get_range() has been modified so that it takes a single
argument -- the device node -- and returns a map, NULL, or an error code.
The map is an array that holds the information regarding the DMA regions.
Each range entry contains the address offset, the cpu_start address, the
dma_start address, and the size of the region.

of_dma_configure() is the typical manner to set range offsets but there are
a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel
driver code.  These cases now invoke the function
dma_direct_set_offset(dev, cpu_addr, dma_addr, size).

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[hch: various interface cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>

Since commit 8212688600ed ("ACPI/IORT: Fix build error when IOMMU_SUPPORT
is disabled"), iort_fwspec_iommu_ops() and iort_add_device_replay() are not
needed anymore when CONFIG_IOMMU_API is not selected. Let's remove them.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20200818063625.980-3-yuzenghui@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>