linux.git/drivers/acpi/arm64, branch v4.14 Linux kernel source tree ACPI/IORT: Fix PCI ACS enablement 2017-10-04T16:34:41+00:00 Lorenzo Pieralisi lorenzo.pieralisi@arm.com 2017-10-02T17:28:44+00:00 37f6b42e9c2966b08c7df5cfddc0d73c39cead4a commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") removed kernel code that was allowing to initialize and probe the SMMU devices early (ie earlier than PCI devices, through linker script callback entries) in the boot process because it was not needed any longer in that the SMMU devices/drivers now support deferred probing. Since the SMMUs probe routines are also in charge of requesting global PCI ACS kernel enablement, commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") also postponed PCI ACS enablement to SMMUs devices probe time, which is too late given that PCI devices needs to detect if PCI ACS is enabled to init the respective capability through the following call path: pci_device_add() -> pci_init_capabilities() -> pci_enable_acs() Add code in the ACPI IORT SMMU platform devices initialization path (that is called before ACPI PCI enumeration) to detect if there exists firmware mappings to map root complexes ids to SMMU ids and if so enable ACS for the system. Fixes: f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing
workarounds") removed kernel code that was allowing to initialize
and probe the SMMU devices early (ie earlier than PCI devices, through
linker script callback entries) in the boot process because it was not
needed any longer in that the SMMU devices/drivers now support deferred
probing.

Since the SMMUs probe routines are also in charge of requesting global
PCI ACS kernel enablement, commit f6810c15cf97 ("iommu/arm-smmu: Clean
up early-probing workarounds") also postponed PCI ACS enablement to
SMMUs devices probe time, which is too late given that PCI devices needs
to detect if PCI ACS is enabled to init the respective capability
through the following call path:

pci_device_add()
 -> pci_init_capabilities()
  -> pci_enable_acs()

Add code in the ACPI IORT SMMU platform devices initialization path
(that is called before ACPI PCI enumeration) to detect if there
exists firmware mappings to map root complexes ids to SMMU ids
and if so enable ACS for the system.

Fixes: f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Merge tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2017-09-05T19:45:03+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-09-05T19:45:03+00:00 53ac64aac9af8cd0e5456c8a9bb68c47b571b0a9 Pull ACPI updates from Rafael Wysocki: "These include a usual ACPICA code update (this time to upstream revision 20170728), a fix for a boot crash on some systems with Thunderbolt devices connected at boot time, a rework of the handling of PCI bridges when setting up device wakeup, new support for Apple device properties, support for DMA configurations reported via ACPI on ARM64, APEI-related updates, ACPI EC driver updates and assorted minor modifications in several places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20170728 including: * Alias operator handling update (Bob Moore). * Deferred resolution of reference package elements (Bob Moore). * Support for the _DMA method in walk resources (Bob Moore). * Tables handling update and support for deferred table verification (Lv Zheng). * Update of SMMU models for IORT (Robin Murphy). * Compiler and disassembler updates (Alex James, Erik Schmauss, Ganapatrao Kulkarni, James Morse). * Tools updates (Erik Schmauss, Lv Zheng). * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv Zheng, Shao Ming). - Rework the initialization of non-wakeup GPEs with method handlers in order to address a boot crash on some systems with Thunderbolt devices connected at boot time where we miss an early hotplug event due to a delay in GPE enabling (Rafael Wysocki). - Rework the handling of PCI bridges when setting up ACPI-based device wakeup in order to avoid disabling wakeup for bridges prematurely (Rafael Wysocki). - Consolidate Apple DMI checks throughout the tree, add support for Apple device properties to the device properties framework and use these properties for the handling of I2C and SPI devices on Apple systems (Lukas Wunner). - Add support for _DMA to the ACPI-based device properties lookup code and make it possible to use the information from there to configure DMA regions on ARM64 systems (Lorenzo Pieralisi). - Fix several issues in the APEI code, add support for exporting the BERT error region over sysfs and update APEI MAINTAINERS entry with reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit Agrawal, Tony Luck, Yazen Ghannam). - Fix a potential initialization ordering issue in the ACPI EC driver and clean it up somewhat (Lv Zheng). - Update the ACPI SPCR driver to extend the existing XGENE 8250 workaround in it to a new platform (m400) and to work around an Xgene UART clock issue (Graeme Gregory). - Add a new utility function to the ACPI core to support using ACPI OEM ID / OEM Table ID / Revision for system identification in blacklisting or similar and switch over the existing code already using this information to this new interface (Toshi Kani). - Fix an xpower PMIC issue related to GPADC reads that always return 0 without extra pin manipulations (Hans de Goede). - Add statements to print debug messages in a couple of places in the ACPI core for easier diagnostics (Rafael Wysocki). - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun Guo). - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko). - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver (Alex Hung). - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal, Ronald Tschalär, Sumeet Pawnikar)" * tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits) ACPI / APEI: Suppress message if HEST not present intel_pstate: convert to use acpi_match_platform_list() ACPI / blacklist: add acpi_match_platform_list() ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources ACPI: make device_attribute const ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region ACPI: APEI: fix the wrong iteration of generic error status block ACPI / processor: make function acpi_processor_check_duplicates() static ACPI / EC: Clean up EC GPE mask flag ACPI: EC: Fix possible issues related to EC initialization order ACPI / PM: Add debug statements to acpi_pm_notify_handler() ACPI: Add debug statements to acpi_global_event_handler() ACPI / scan: Enable GPEs before scanning the namespace ACPICA: Make it possible to enable runtime GPEs earlier ACPICA: Dispatch active GPEs at init time ACPI: SPCR: work around clock issue on xgene UART ACPI: SPCR: extend XGENE 8250 workaround to m400 ACPI / LPSS: Don't abort ACPI scan on missing mem resource mailbox: pcc: Drop uninformative output during boot ACPI/IORT: Add IORT named component memory address limits ... 
Pull ACPI updates from Rafael Wysocki:
 "These include a usual ACPICA code update (this time to upstream
  revision 20170728), a fix for a boot crash on some systems with
  Thunderbolt devices connected at boot time, a rework of the handling
  of PCI bridges when setting up device wakeup, new support for Apple
  device properties, support for DMA configurations reported via ACPI on
  ARM64, APEI-related updates, ACPI EC driver updates and assorted minor
  modifications in several places.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20170728
     including:
      * Alias operator handling update (Bob Moore).
      * Deferred resolution of reference package elements (Bob Moore).
      * Support for the _DMA method in walk resources (Bob Moore).
      * Tables handling update and support for deferred table
        verification (Lv Zheng).
      * Update of SMMU models for IORT (Robin Murphy).
      * Compiler and disassembler updates (Alex James, Erik Schmauss,
        Ganapatrao Kulkarni, James Morse).
      * Tools updates (Erik Schmauss, Lv Zheng).
      * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv
        Zheng, Shao Ming).

   - Rework the initialization of non-wakeup GPEs with method handlers
     in order to address a boot crash on some systems with Thunderbolt
     devices connected at boot time where we miss an early hotplug event
     due to a delay in GPE enabling (Rafael Wysocki).

   - Rework the handling of PCI bridges when setting up ACPI-based
     device wakeup in order to avoid disabling wakeup for bridges
     prematurely (Rafael Wysocki).

   - Consolidate Apple DMI checks throughout the tree, add support for
     Apple device properties to the device properties framework and use
     these properties for the handling of I2C and SPI devices on Apple
     systems (Lukas Wunner).

   - Add support for _DMA to the ACPI-based device properties lookup
     code and make it possible to use the information from there to
     configure DMA regions on ARM64 systems (Lorenzo Pieralisi).

   - Fix several issues in the APEI code, add support for exporting the
     BERT error region over sysfs and update APEI MAINTAINERS entry with
     reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit
     Agrawal, Tony Luck, Yazen Ghannam).

   - Fix a potential initialization ordering issue in the ACPI EC driver
     and clean it up somewhat (Lv Zheng).

   - Update the ACPI SPCR driver to extend the existing XGENE 8250
     workaround in it to a new platform (m400) and to work around an
     Xgene UART clock issue (Graeme Gregory).

   - Add a new utility function to the ACPI core to support using ACPI
     OEM ID / OEM Table ID / Revision for system identification in
     blacklisting or similar and switch over the existing code already
     using this information to this new interface (Toshi Kani).

   - Fix an xpower PMIC issue related to GPADC reads that always return
     0 without extra pin manipulations (Hans de Goede).

   - Add statements to print debug messages in a couple of places in the
     ACPI core for easier diagnostics (Rafael Wysocki).

   - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun
     Guo).

   - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko).

   - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver
     (Alex Hung).

   - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur
     Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal,
     Ronald Tschalär, Sumeet Pawnikar)"

* tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
  ACPI / APEI: Suppress message if HEST not present
  intel_pstate: convert to use acpi_match_platform_list()
  ACPI / blacklist: add acpi_match_platform_list()
  ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources
  ACPI: make device_attribute const
  ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region
  ACPI: APEI: fix the wrong iteration of generic error status block
  ACPI / processor: make function acpi_processor_check_duplicates() static
  ACPI / EC: Clean up EC GPE mask flag
  ACPI: EC: Fix possible issues related to EC initialization order
  ACPI / PM: Add debug statements to acpi_pm_notify_handler()
  ACPI: Add debug statements to acpi_global_event_handler()
  ACPI / scan: Enable GPEs before scanning the namespace
  ACPICA: Make it possible to enable runtime GPEs earlier
  ACPICA: Dispatch active GPEs at init time
  ACPI: SPCR: work around clock issue on xgene UART
  ACPI: SPCR: extend XGENE 8250 workaround to m400
  ACPI / LPSS: Don't abort ACPI scan on missing mem resource
  mailbox: pcc: Drop uninformative output during boot
  ACPI/IORT: Add IORT named component memory address limits
  ...
ACPI/IORT: Fix build regression without IOMMU 2017-08-10T17:16:01+00:00 Arnd Bergmann arnd@arndb.de 2017-08-10T16:45:22+00:00 4d36037a9a07f88c2dc7eea5d1991f282e0a9901 A recent change reintroduced a bug that had previously been fixed by commit d49f2dedf33b ("ACPI/IORT: Fix CONFIG_IOMMU_API dependency"): drivers/acpi/arm64/iort.c: In function 'iort_iommu_configure': drivers/acpi/arm64/iort.c:829:26: error: 'struct iommu_fwspec' has no member named 'ops' Replace a direct reference to iommu_fwspec->ops with a helper function call to fix the issue. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
A recent change reintroduced a bug that had previously been
fixed by commit d49f2dedf33b ("ACPI/IORT: Fix CONFIG_IOMMU_API
dependency"):

drivers/acpi/arm64/iort.c: In function 'iort_iommu_configure':
drivers/acpi/arm64/iort.c:829:26: error: 'struct iommu_fwspec' has no member named 'ops'

Replace a direct reference to iommu_fwspec->ops with a helper function
call to fix the issue.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ACPI/IORT: numa: Add numa node mapping for smmuv3 devices 2017-08-08T15:44:38+00:00 Ganapatrao Kulkarni ganapatrao.kulkarni@cavium.com 2017-08-02T17:58:25+00:00 5fe0ce3b9e514168427463d0c7a86dfa635da3d2 ARM IORT specification(rev. C) has added provision to define proximity domain in SMMUv3 IORT table. Adding required code to parse Proximity domain and set numa_node of smmv3 platform devices. Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> [lorenzo.pieralisi@arm.com: update pr_info()/commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 
ARM IORT specification(rev. C) has added  provision to define proximity
domain in SMMUv3 IORT table. Adding required code to parse Proximity
domain and set numa_node of smmv3 platform devices.

Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
[lorenzo.pieralisi@arm.com: update pr_info()/commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
ACPI/IORT: Handle PCI aliases properly for IOMMUs 2017-08-08T14:44:27+00:00 Robin Murphy robin.murphy@arm.com 2017-08-04T16:42:06+00:00 bc8648d49a958148bb84444252b96d19659a42e1 When a PCI device has DMA quirks, we need to ensure that an upstream IOMMU knows about all possible aliases, since the presence of a DMA quirk does not preclude the device still also emitting transactions (e.g. MSIs) on its 'real' RID. Similarly, the rules for bridge aliasing are relatively complex, and some bridges may only take ownership of transactions under particular transient circumstances, leading again to multiple RIDs potentially being seen at the IOMMU for the given device. Take all this into account in iort_iommu_configure() by mapping every RID produced by the alias walk, not just whichever one comes out last. Since adding any more internal PTR_ERR() juggling would have confused me no end, a bit of refactoring happens in the process - we know where to find the ops if everything succeeded, so we're free to just pass regular error codes around up until then. CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> CC: Hanjun Guo <hanjun.guo@linaro.org> CC: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> [lorenzo.pieralisi@arm.com: tagged __get_pci_rid __maybe_unused] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 
When a PCI device has DMA quirks, we need to ensure that an upstream
IOMMU knows about all possible aliases, since the presence of a DMA
quirk does not preclude the device still also emitting transactions
(e.g. MSIs) on its 'real' RID. Similarly, the rules for bridge aliasing
are relatively complex, and some bridges may only take ownership of
transactions under particular transient circumstances, leading again to
multiple RIDs potentially being seen at the IOMMU for the given device.

Take all this into account in iort_iommu_configure() by mapping every
RID produced by the alias walk, not just whichever one comes out last.
Since adding any more internal PTR_ERR() juggling would have confused me
no end, a bit of refactoring happens in the process - we know where to
find the ops if everything succeeded, so we're free to just pass regular
error codes around up until then.

CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: Hanjun Guo <hanjun.guo@linaro.org>
CC: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[lorenzo.pieralisi@arm.com: tagged __get_pci_rid __maybe_unused]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
ACPI/IORT: Add IORT named component memory address limits 2017-08-07T12:29:09+00:00 Lorenzo Pieralisi lorenzo.pieralisi@arm.com 2017-08-03T12:32:39+00:00 10d8ab2c15b9ef2f46c35e7c36781399d6f2cc82 IORT named components provide firmware configuration describing how many address bits a given device is capable of generating to address memory. Add code to the kernel to retrieve memory address limits configuration for IORT named components and configure DMA masks accordingly. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
IORT named components provide firmware configuration describing
how many address bits a given device is capable of generating
to address memory.

Add code to the kernel to retrieve memory address limits
configuration for IORT named components and configure DMA masks
accordingly.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI: Make acpi_dma_configure() DMA regions aware 2017-08-07T12:28:51+00:00 Lorenzo Pieralisi lorenzo.pieralisi@arm.com 2017-08-07T10:29:49+00:00 7ad4263980826e8b02e121af22f4f4c9103fe86d Current ACPI DMA configuration set-up device DMA capabilities through kernel defaults that do not take into account platform specific DMA configurations reported by firmware. By leveraging the ACPI acpi_dev_get_dma_resources() API, add code in acpi_dma_configure() to retrieve the DMA regions to correctly set-up PCI devices DMA parameters. Rework the ACPI IORT kernel API to make sure they can accommodate the DMA set-up required by firmware. By making PCI devices DMA set-up ACPI IORT specific, the kernel is shielded from unwanted regressions that could be triggered by parsing DMA resources on arches that were previously ignoring them (ie x86/ia64), leaving kernel behaviour unchanged on those arches. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Current ACPI DMA configuration set-up device DMA capabilities through
kernel defaults that do not take into account platform specific DMA
configurations reported by firmware.

By leveraging the ACPI acpi_dev_get_dma_resources() API, add code
in acpi_dma_configure() to retrieve the DMA regions to correctly
set-up PCI devices DMA parameters.

Rework the ACPI IORT kernel API to make sure they can accommodate
the DMA set-up required by firmware. By making PCI devices DMA set-up
ACPI IORT specific, the kernel is shielded from unwanted regressions
that could be triggered by parsing DMA resources on arches that were
previously ignoring them (ie x86/ia64), leaving kernel behaviour
unchanged on those arches.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu 2017-07-12T17:00:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-07-12T17:00:04+00:00 fb4e3beeffa47619985f190663c6ef424f063a22 Pull IOMMU updates from Joerg Roedel: "This update comes with: - Support for lockless operation in the ARM io-pgtable code. This is an important step to solve the scalability problems in the common dma-iommu code for ARM - Some Errata workarounds for ARM SMMU implemenations - Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver. The code suffered from very high flush rates, with the new implementation the flush rate is down to ~1% of what it was before - Support for amd_iommu=off when booting with kexec. The problem here was that the IOMMU driver bailed out early without disabling the iommu hardware, if it was enabled in the old kernel - The Rockchip IOMMU driver is now available on ARM64 - Align the return value of the iommu_ops->device_group call-backs to not miss error values - Preempt-disable optimizations in the Intel VT-d and common IOVA code to help Linux-RT - Various other small cleanups and fixes" * tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Constify intel_dma_ops iommu: Warn once when device_group callback returns NULL iommu/omap: Return ERR_PTR in device_group call-back iommu: Return ERR_PTR() values from device_group call-backs iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device() iommu/vt-d: Don't disable preemption while accessing deferred_flush() iommu/iova: Don't disable preempt around this_cpu_ptr() iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126 iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701) iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74 ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE iommu/arm-smmu-v3: Remove io-pgtable spinlock iommu/arm-smmu: Remove io-pgtable spinlock iommu/io-pgtable-arm-v7s: Support lockless operation iommu/io-pgtable-arm: Support lockless operation iommu/io-pgtable: Introduce explicit coherency iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap ... 
Pull IOMMU updates from Joerg Roedel:
 "This update comes with:

   - Support for lockless operation in the ARM io-pgtable code.

     This is an important step to solve the scalability problems in the
     common dma-iommu code for ARM

   - Some Errata workarounds for ARM SMMU implemenations

   - Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver.

     The code suffered from very high flush rates, with the new
     implementation the flush rate is down to ~1% of what it was before

   - Support for amd_iommu=off when booting with kexec.

     The problem here was that the IOMMU driver bailed out early without
     disabling the iommu hardware, if it was enabled in the old kernel

   - The Rockchip IOMMU driver is now available on ARM64

   - Align the return value of the iommu_ops->device_group call-backs to
     not miss error values

   - Preempt-disable optimizations in the Intel VT-d and common IOVA
     code to help Linux-RT

   - Various other small cleanups and fixes"

* tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits)
  iommu/vt-d: Constify intel_dma_ops
  iommu: Warn once when device_group callback returns NULL
  iommu/omap: Return ERR_PTR in device_group call-back
  iommu: Return ERR_PTR() values from device_group call-backs
  iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device()
  iommu/vt-d: Don't disable preemption while accessing deferred_flush()
  iommu/iova: Don't disable preempt around this_cpu_ptr()
  iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126
  iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701)
  iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74
  ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model
  iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions
  iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table
  iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE
  iommu/arm-smmu-v3: Remove io-pgtable spinlock
  iommu/arm-smmu: Remove io-pgtable spinlock
  iommu/io-pgtable-arm-v7s: Support lockless operation
  iommu/io-pgtable-arm: Support lockless operation
  iommu/io-pgtable: Introduce explicit coherency
  iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap
  ...
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux 2017-07-06T00:09:27+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-07-06T00:09:27+00:00 55a7b2125cf4739a8478d2d7223310ae7393408c Pull arm64 updates from Will Deacon: - RAS reporting via GHES/APEI (ACPI) - Indirect ftrace trampolines for modules - Improvements to kernel fault reporting - Page poisoning - Sigframe cleanups and preparation for SVE context - Core dump fixes - Sparse fixes (mainly relating to endianness) - xgene SoC PMU v3 driver - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits) arm64: fix endianness annotation for 'struct jit_ctx' and friends arm64: cpuinfo: constify attribute_group structures. arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set() arm64: ptrace: Remove redundant overrun check from compat_vfp_set() arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn() arm64: fix endianness annotation in get_kaslr_seed() arm64: add missing conversion to __wsum in ip_fast_csum() arm64: fix endianness annotation in acpi_parking_protocol.c arm64: use readq() instead of readl() to read 64bit entry_point arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm() arm64: fix endianness annotation for aarch64_insn_write() arm64: fix endianness annotation in aarch64_insn_read() arm64: fix endianness annotation in call_undef_hook() arm64: fix endianness annotation for debug-monitors.c ras: mark stub functions as 'inline' arm64: pass endianness info to sparse arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels arm64: signal: Allow expansion of the signal frame acpi: apei: check for pending errors when probing GHES entries ... 
Pull arm64 updates from Will Deacon:

 - RAS reporting via GHES/APEI (ACPI)

 - Indirect ftrace trampolines for modules

 - Improvements to kernel fault reporting

 - Page poisoning

 - Sigframe cleanups and preparation for SVE context

 - Core dump fixes

 - Sparse fixes (mainly relating to endianness)

 - xgene SoC PMU v3 driver

 - Misc cleanups and non-critical fixes

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits)
  arm64: fix endianness annotation for 'struct jit_ctx' and friends
  arm64: cpuinfo: constify attribute_group structures.
  arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set()
  arm64: ptrace: Remove redundant overrun check from compat_vfp_set()
  arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails
  arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn()
  arm64: fix endianness annotation in get_kaslr_seed()
  arm64: add missing conversion to __wsum in ip_fast_csum()
  arm64: fix endianness annotation in acpi_parking_protocol.c
  arm64: use readq() instead of readl() to read 64bit entry_point
  arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm()
  arm64: fix endianness annotation for aarch64_insn_write()
  arm64: fix endianness annotation in aarch64_insn_read()
  arm64: fix endianness annotation in call_undef_hook()
  arm64: fix endianness annotation for debug-monitors.c
  ras: mark stub functions as 'inline'
  arm64: pass endianness info to sparse
  arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels
  arm64: signal: Allow expansion of the signal frame
  acpi: apei: check for pending errors when probing GHES entries
  ...
Merge branch 'for-joerg/arm-smmu/updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu 2017-06-28T08:42:54+00:00 Joerg Roedel jroedel@suse.de 2017-06-28T08:42:54+00:00 0b25635bd4da0a4b3d294f7b27aea0dc0cdfccff