linux.git/drivers/acpi/Kconfig, branch v4.1

ACPI: move arm64 GSI IRQ model to generic GSI IRQ layer

2015-03-26T15:13:09+00:00

The code deployed to implement GSI linux IRQ numbers mapping on arm64 turns
out to be generic enough so that it can be moved to ACPI core code along
with its respective config option ACPI_GENERIC_GSI selectable on
architectures that can reuse the same code.

Current ACPI IRQ mapping code is not integrated in the kernel IRQ domain
infrastructure, in particular there is no way to look-up the
IRQ domain associated with a particular interrupt controller, so this
first version of GSI generic code carries out the GSI<->IRQ mapping relying
on the IRQ default domain which is supposed to be always set on a
specific architecture in case the domain structure passed to
irq_create/find_mapping() functions is missing.

This patch moves the arm64 acpi functions that implement the gsi mappings:

acpi_gsi_to_irq()
acpi_register_gsi()
acpi_unregister_gsi()

to ACPI core code. Since the generic GSI<->domain mapping is based on IRQ
domains, it can be extended as soon as a way to map an interrupt
controller to an IRQ domain is implemented for ACPI in the IRQ domain
layer.

x86 and ia64 code for GSI mappings cannot rely on the generic GSI
layer at present for legacy reasons, so they do not select the
ACPI_GENERIC_GSI config options and keep relying on their arch
specific GSI mapping layer.

Cc: Jiang Liu 
Cc: Catalin Marinas 
Cc: Rafael J. Wysocki 
Acked-by: Hanjun Guo 
Acked-by: Will Deacon 
Acked-by: Marc Zyngier 
Signed-off-by: Lorenzo Pieralisi 
Signed-off-by: Will Deacon

ARM64 / ACPI: Enable ARM64 in Kconfig

2015-03-26T15:13:08+00:00

Add Kconfigs to build ACPI on ARM64, and make ACPI available on ARM64.

acpi_idle driver is x86/IA64 dependent now, so make CONFIG_ACPI_PROCESSOR
depend on X86 || IA64, and implement it on ARM64 in the future.

CC: Rafael J. Wysocki 
CC: Catalin Marinas 
CC: Will Deacon 
Reviewed-by: Grant Likely 
Tested-by: Suravee Suthikulpanit 
Tested-by: Yijing Wang 
Tested-by: Mark Langsdorf 
Tested-by: Jon Masters 
Tested-by: Timur Tabi 
Tested-by: Robert Richter 
Acked-by: Robert Richter 
Acked-by: Rafael J. Wysocki 
Signed-off-by: Graeme Gregory 
Signed-off-by: Al Stone 
Signed-off-by: Hanjun Guo 
Signed-off-by: Will Deacon

ACPI / sleep: Introduce CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT

2015-03-25T11:49:31+00:00

ACPI 5.1 does not currently support S states for ARM64 hardware but
ACPI code will call acpi_target_system_state() and acpi_sleep_init()
for device power management, so introduce
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT and select it for x86 and
ia64 only to make sleep functions available, and also introduce stub
function to allow other drivers to function until S states are defined
for ARM64.

It will be no functional change for x86 and IA64.

Suggested-by: Rafael J. Wysocki 
Acked-by: Lorenzo Pieralisi 
Acked-by: Rafael J. Wysocki 
Signed-off-by: Graeme Gregory 
Signed-off-by: Tomasz Nowicki 
Signed-off-by: Hanjun Guo 
Signed-off-by: Will Deacon

x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug

2015-02-05T14:09:26+00:00

Enable support of IOAPIC hotplug by:
1) reintroducing ACPI based IOAPIC driver
2) enhance pci_root driver to hook hotplug events

The ACPI IOAPIC driver is always enabled if all of ACPI, PCI and IOAPIC
are enabled.

Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Joerg Roedel 
Cc: Greg Kroah-Hartman 
Cc: Benjamin Herrenschmidt 
Cc: Rafael J. Wysocki 
Cc: Bjorn Helgaas 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Borislav Petkov 
Cc: Len Brown 
Link: http://lkml.kernel.org/r/1414387308-27148-19-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Rafael J. Wysocki

Merge branches 'acpi-video' and 'acpi-pmic'

2014-12-08T18:54:45+00:00

* acpi-video:
  ACPI / video: Run _BCL before deciding registering backlight

* acpi-pmic:
  ACPI / PMIC: AXP288: support virtual GPIO in ACPI table
  ACPI / PMIC: support PMIC operation region for XPower AXP288
  ACPI / PMIC: support PMIC operation region for CrystalCove
  iio/axp288_adc: remove THIS_MODULE owner
  mfd/axp20x: avoid irq numbering collision
  iio: adc: Add module device table for autoloading
  iio: adc: Add support for axp288 adc
  mfd: axp20x: Extend axp20x to support axp288 pmic

ACPI / PMIC: support PMIC operation region for XPower AXP288

2014-11-26T22:32:05+00:00

The Baytrail-T-CR platform firmware has defined two customized operation
regions for PMIC chip Dollar Cove XPower - one is for power resource
handling and one is for thermal just like the CrystalCove one. This patch
adds support for them on top of the common PMIC opregion region code.

Signed-off-by: Aaron Lu 
Acked-by: Lee Jones  for the MFD part
Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: support PMIC operation region for CrystalCove

2014-11-26T22:32:05+00:00

The Baytrail-T platform firmware has defined two customized operation
regions for PMIC chip Crystal Cove - one is for power resource handling
and one is for thermal: sensor temperature reporting, trip point setting,
etc. This patch adds support for them on top of the existing Crystal Cove
PMIC driver.

The reason to split code into a separate file intel_pmic.c is that there
are more PMIC drivers with ACPI operation region support coming and we can
re-use those code. The intel_pmic_opregion_data structure is created also
for this purpose: when we need to support a new PMIC's operation region,
we just need to fill those callbacks and the two register mapping tables.

Signed-off-by: Aaron Lu 
Acked-by: Lee Jones  for the MFD part
Signed-off-by: Rafael J. Wysocki

ACPI / Kconfig: Remove redundant depends on ACPI

2014-11-18T00:43:08+00:00

Since config ACPI_REDUCED_HARDWARE_ONLY is already depended
on ACPI (inside if ACPI / endif), so depdens on ACPI is redundant,
remove it and fix the minor syntax problem also.

Signed-off-by: Hanjun Guo 
Signed-off-by: Rafael J. Wysocki

Thermal: int340x thermal: select ACPI fan driver

2014-10-17T06:30:41+00:00

we share the same driver for both ACPI predefined Fan device
and INT3404 Fan device, thus we should select the ACPI Fan
driver when int340x thermal drivers are enabeld.

Signed-off-by: Zhang Rui

Merge tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2014-08-07T03:34:19+00:00

Pull ACPI and power management updates from Rafael Wysocki:
"Again, ACPICA leads the pack (47 commits), followed by cpufreq (18
commits) and system suspend/hibernation (9 commits).

From the new code perspective, the ACPICA update brings ACPI 5.1 to
the table, including a new device configuration object called _DSD
(Device Specific Data) that will hopefully help us to operate device
properties like Device Trees do (at least to some extent) and changes
related to supporting ACPI on ARM.

Apart from that we have hibernation changes making it use radix trees
to store memory bitmaps which should speed up some operations carried
out by it quite significantly. We also have some power management
changes related to suspend-to-idle (the "freeze" sleep state) support
and more preliminary changes needed to support ACPI on ARM (outside of
ACPICA).

The rest is fixes and cleanups pretty much everywhere.

Specifics:

- ACPICA update to upstream version 20140724. That includes ACPI 5.1
material (support for the _CCA and _DSD predefined names, changes
related to the DMAR and PCCT tables and ARM support among other
things) and cleanups related to using ACPICA's header files. A
major part of it is related to acpidump and the core code used by
that utility. Changes from Bob Moore, David E Box, Lv Zheng,
Sascha Wildner, Tomasz Nowicki, Hanjun Guo.

- Radix trees for memory bitmaps used by the hibernation core from
Joerg Roedel.

- Support for waking up the system from suspend-to-idle (also known
as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
(Rafael J Wysocki).

- Fixes for issues related to ACPI button events (Rafael J Wysocki).

- New device ID for an ACPI-enumerated device included into the
Wildcat Point PCH from Jie Yang.

- ACPI video updates related to backlight handling from Hans de Goede
and Linus Torvalds.

- Preliminary changes needed to support ACPI on ARM from Hanjun Guo
and Graeme Gregory.

- ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.

- Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
(Rafael J Wysocki).

- ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J
Wysocki.

- Cleanups and improvements related to system suspend from Lan
Tianyu, Randy Dunlap and Rafael J Wysocki.

- ACPI battery cleanup from Wei Yongjun.

- cpufreq core fixes from Viresh Kumar.

- Elimination of a deadband effect from the cpufreq ondemand governor
and intel_pstate driver cleanups from Stratos Karafotis.

- 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas
Patocka.

- Fix for the imx6 cpufreq driver from Anson Huang.

- cpuidle core and governor cleanups from Daniel Lezcano, Sandeep
Tripathy and Mohammad Merajul Islam Molla.

- Build fix for the big_little cpuidle driver from Sachin Kamat.

- Configuration fix for the Operation Performance Points (OPP)
framework from Mark Brown.

- APM cleanup from Jean Delvare.

- cpupower utility fixes and cleanups from Peter Senna Tschudin,
Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas
Renninger"

* tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits)
ACPI / LPSS: add LPSS device for Wildcat Point PCH
ACPI / PNP: Replace faulty is_hex_digit() by isxdigit()
ACPICA: Update version to 20140724.
ACPICA: ACPI 5.1: Update for PCCT table changes.
ACPICA/ARM: ACPI 5.1: Update for GTDT table changes.
ACPICA/ARM: ACPI 5.1: Update for MADT changes.
ACPICA/ARM: ACPI 5.1: Update for FADT changes.
ACPICA: ACPI 5.1: Support for the _CCA predifined name.
ACPICA: ACPI 5.1: New notify value for System Affinity Update.
ACPICA: ACPI 5.1: Support for the _DSD predefined name.
ACPICA: Debug object: Add current value of Timer() to debug line prefix.
ACPICA: acpihelp: Add UUID support, restructure some existing files.
ACPICA: Utilities: Fix local printf issue.
ACPICA: Tables: Update for DMAR table changes.
ACPICA: Remove some extraneous printf arguments.
ACPICA: Update for comments/formatting. No functional changes.
ACPICA: Disassembler: Add support for the ToUUID opererator (macro).
ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro.
ACPICA: Work around an ancient GCC bug.
ACPI / processor: Make it possible to get local x2apic id via _MAT
...