Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

MTL C0 stepping fixed issue related to butrress interrupt status clearing,
to clear an interrupt status it is required to write 1 to specific
status bit field. This allows to execute read, modify and write routine.

Writing 0 will not clear the interrupt and will cause interrupt storm.

Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230703080725.2065635-2-stanislaw.gruszka@linux.intel.com

Incorrect REGB_WR32() macro was used to access VPUIP register.
Use correct REGV_WR32().

Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230703080725.2065635-1-stanislaw.gruszka@linux.intel.com

Pull drm updates from Dave Airlie:
 "There is one set of patches to misc for a i915 gsc/mei proxy driver.

  Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
  of refactoring.

  core:
   - replace strlcpy with strscpy
   - EDID changes to support further conversion to struct drm_edid
   - Move i915 DSC parameter code to common DRM helpers
   - Add Colorspace functionality

  aperture:
   - ignore framebuffers with non-primary devices

  fbdev:
   - use fbdev i/o helpers
   - add Kconfig options for fb_ops helpers
   - use new fb io helpers directly in drivers

  sysfs:
   - export DRM connector ID

  scheduler:
   - Avoid an infinite loop

  ttm:
   - store function table in .rodata
   - Add query for TTM mem limit
   - Add NUMA awareness to pools
   - Export ttm_pool_fini()

  bridge:
   - fsl-ldb: support i.MX6SX
   - lt9211, lt9611: remove blanking packets
   - tc358768: implement input bus formats, devm cleanups
   - ti-snd65dsi86: implement wait_hpd_asserted
   - analogix: fix endless probe loop
   - samsung-dsim: support swapped clock, fix enabling, support var
     clock
   - display-connector: Add support for external power supply
   - imx: Fix module linking
   - tc358762: Support reset GPIO

  panel:
   - nt36523: Support Lenovo J606F
   - st7703: Support Anbernic RG353V-V2
   - InnoLux G070ACE-L01 support
   - boe-tv101wum-nl6: Improve initialization
   - sharp-ls043t1le001: Mode fixes
   - simple: BOE EV121WXM-N10-1850, S6D7AA0
   - Ampire AM-800480L1TMQW-T00H
   - Rocktech RK043FN48H
   - Starry himax83102-j02
   - Starry ili9882t

  amdgpu:
   - add new ctx query flag to handle reset better
   - add new query/set shadow buffer for rdna3
   - DCN 3.2/3.1.x/3.0.x updates
   - Enable DC_FP on loongarch
   - PCIe fix for RDNA2
   - improve DC FAMS/SubVP support for better power management
   - partition support for lots of engines
   - Take NUMA into account when allocating memory
   - Add new DRM_AMDGPU_WERROR config parameter to help with CI
   - Initial SMU13 overdrive support
   - Add support for new colorspace KMS API
   - W=1 fixes

  amdkfd:
   - Query TTM mem limit rather than hardcoding it
   - GC 9.4.3 partition support
   - Handle NUMA for partitions
   - Add debugger interface for enabling gdb
   - Add KFD event age tracking

  radeon:
   - Fix possible UAF

  i915:
   - new getparam for PXP support
   - GSC/MEI proxy driver
   - Meteorlake display enablement
   - avoid clearing preallocated framebuffers with TTM
   - implement framebuffer mmap support
   - Disable sampler indirect state in bindless heap
   - Enable fdinfo for GuC backends
   - GuC loading and firmware table handling fixes
   - Various refactors for multi-tile enablement
   - Define MOCS and PAT tables for MTL
   - GSC/MEI support for Meteorlake
   - PMU multi-tile support
   - Large driver kernel doc cleanup
   - Allow VRR toggling and arbitrary refresh rates
   - Support async flips on linear buffers on display ver 12+
   - Expose CRTC CTM property on ILK/SNB/VLV
   - New debugfs for display clock frequencies
   - Hotplug refactoring
   - Display refactoring
   - I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
   - Use large rings for compute contexts
   - HuC loading for MTL
   - Allow user to set cache at BO creation
   - MTL powermanagement enhancements
   - Switch to dedicated workqueues to stop using flush_scheduled_work()
   - Move display runtime init under display/
   - Remove 10bit gamma on desktop gen3 parts, they don't support it

  habanalabs:
   - uapi: return 0 for user queries if there was a h/w or f/w error
   - Add pci health check when we lose connection with the firmware.
     This can be used to distinguish between pci link down and firmware
     getting stuck.
   - Add more info to the error print when TPC interrupt occur.
   - Firmware fixes

  msm:
   - Adreno A660 bindings
   - SM8350 MDSS bindings fix
   - Added support for DPU on sm6350 and sm6375 platforms
   - Implemented tearcheck support to support vsync on SM150 and newer
     platforms
   - Enabled missing features (DSPP, DSC, split display) on sc8180x,
     sc8280xp, sm8450
   - Added support for DSI and 28nm DSI PHY on MSM8226 platform
   - Added support for DSI on sm6350 and sm6375 platforms
   - Added support for display controller on MSM8226 platform
   - A690 GPU support
   - Move cmdstream dumping out of fence signaling path
   - a610 support
   - Support for a6xx devices without GMU

  nouveau:
   - NULL ptr before deref fixes

  armada:
   - implement fbdev emulation as client

  sun4i:
   - fix mipi-dsi dotclock
   - release clocks

  vc4:
   - rgb range toggle property
   - BT601 / BT2020 HDMI support

  vkms:
   - convert to drmm helpers
   - add reflection and rotation support
   - fix rgb565 conversion

  gma500:
   - fix iomem access

  shmobile:
   - support renesas soc platform
   - enable fbdev

  mxsfb:
   - Add support for i.MX93 LCDIF

  stm:
   - dsi: Use devm_ helper
   - ltdc: Fix potential invalid pointer deref

  renesas:
   - Group drivers in renesas subdirectory to prepare for new platform
   - Drop deprecated R-Car H3 ES1.x support

  meson:
   - Add support for MIPI DSI displays

  virtio:
   - add sync object support

  mediatek:
   - Add display binding document for MT6795"

* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
  drm/i915: Fix a NULL vs IS_ERR() bug
  drm/i915: make i915_drm_client_fdinfo() reference conditional again
  drm/i915/huc: Fix missing error code in intel_huc_init()
  drm/i915/gsc: take a wakeref for the proxy-init-completion check
  drm/msm/a6xx: Add A610 speedbin support
  drm/msm/a6xx: Add A619_holi speedbin support
  drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
  drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
  drm/msm/a6xx: Fix some A619 tunables
  drm/msm/a6xx: Add A610 support
  drm/msm/a6xx: Add support for A619_holi
  drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
  drm/msm/a6xx: Introduce GMU wrapper support
  drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
  drm/msm/a6xx: Extend and explain UBWC config
  drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
  drm/msm/a6xx: Add a helper for software-resetting the GPU
  drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
  drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
  drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
  ...

smatch warning:
	drivers/accel/qaic/qaic_data.c:620 qaic_free_object() error:
		dereferencing freed memory 'obj->import_attach'

obj->import_attach is detached and freed using dma_buf_detach().
But used after free to decrease the dmabuf ref count using
dma_buf_put().

drm_prime_gem_destroy() handles this issue and performs the proper clean
up instead of open coding it in the driver.

Fixes: ff13be830333 ("accel/qaic: Add datapath")
Reported-by: Sukrut Bellary <sukrut.bellary@linux.com>
Closes: https://lore.kernel.org/all/20230610021200.377452-1-sukrut.bellary@linux.com/
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230614161528.11710-1-quic_jhugo@quicinc.com

Linux 6.4-rc7

Need this to pull in the msm work.

Signed-off-by: Dave Airlie <airlied@redhat.com>

If qaic_destroy_drm_device() is called before the device has fully
initialized it will cause a NULL pointer dereference as the drm device
has not yet been created. Fix this with a NULL check.

Fixes: c501ca23a6a3 ("accel/qaic: Add uapi and core driver file")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602210440.8411-3-quic_jhugo@quicinc.com

After user handle is allocated, if mutex is interrupted, we do not free
the user handle and return an error. Kref had been initialized, but not
added to users list, so device teardown would also not call free_usr.

Fixes: c501ca23a6a3 ("accel/qaic: Add uapi and core driver file")
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602210440.8411-2-quic_jhugo@quicinc.com

Moved error info reset code to single function for future use from
other places in the driver.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In order to increase reliability of the event queue interface,
we apply to Gaudi2 the same mechanism we have in Gaudi1.
The extra validation is basically checking that the received
event index matches the expected index.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>