Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...

Pull crypto update from Herbert Xu:
 "API:
   - Add support for AEAD in simd
   - Add fuzz testing to testmgr
   - Add panic_on_fail module parameter to testmgr
   - Use per-CPU struct instead multiple variables in scompress
   - Change verify API for akcipher

  Algorithms:
   - Convert x86 AEAD algorithms over to simd
   - Forbid 2-key 3DES in FIPS mode
   - Add EC-RDSA (GOST 34.10) algorithm

  Drivers:
   - Set output IV with ctr-aes in crypto4xx
   - Set output IV in rockchip
   - Fix potential length overflow with hashing in sun4i-ss
   - Fix computation error with ctr in vmx
   - Add SM4 protected keys support in ccree
   - Remove long-broken mxc-scc driver
   - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits)
  crypto: ccree - use a proper le32 type for le32 val
  crypto: ccree - remove set but not used variable 'du_size'
  crypto: ccree - Make cc_sec_disable static
  crypto: ccree - fix spelling mistake "protedcted" -> "protected"
  crypto: caam/qi2 - generate hash keys in-place
  crypto: caam/qi2 - fix DMA mapping of stack memory
  crypto: caam/qi2 - fix zero-length buffer DMA mapping
  crypto: stm32/cryp - update to return iv_out
  crypto: stm32/cryp - remove request mutex protection
  crypto: stm32/cryp - add weak key check for DES
  crypto: atmel - remove set but not used variable 'alg_name'
  crypto: picoxcell - Use dev_get_drvdata()
  crypto: crypto4xx - get rid of redundant using_sd variable
  crypto: crypto4xx - use sync skcipher for fallback
  crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues
  crypto: crypto4xx - fix ctr-aes missing output IV
  crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA
  crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o
  crypto: ccree - handle tee fips error during power management resume
  crypto: ccree - add function to handle cryptocell tee fips error
  ...

Three trivial overlapping conflicts.

Signed-off-by: David S. Miller <davem@davemloft.net>

We currently have two levels of strict validation:

 1) liberal (default)
     - undefined (type >= max) & NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted
     - garbage at end of message accepted
 2) strict (opt-in)
     - NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted

Split out parsing strictness into four different options:
 * TRAILING     - check that there's no trailing data after parsing
                  attributes (in message or nested)
 * MAXTYPE      - reject attrs > max known type
 * UNSPEC       - reject attributes with NLA_UNSPEC policy entries
 * STRICT_ATTRS - strictly validate attribute size

The default for future things should be *everything*.
The current *_strict() is a combination of TRAILING and MAXTYPE,
and is renamed to _deprecated_strict().
The current regular parsing has none of this, and is renamed to
*_parse_deprecated().

Additionally it allows us to selectively set one of the new flags
even on old policies. Notably, the UNSPEC flag could be useful in
this case, since it can be arranged (by filling in the policy) to
not be an incompatible userspace ABI change, but would then going
forward prevent forgetting attribute entries. Similar can apply
to the POLICY flag.

We end up with the following renames:
 * nla_parse           -> nla_parse_deprecated
 * nla_parse_strict    -> nla_parse_deprecated_strict
 * nlmsg_parse         -> nlmsg_parse_deprecated
 * nlmsg_parse_strict  -> nlmsg_parse_deprecated_strict
 * nla_parse_nested    -> nla_parse_nested_deprecated
 * nla_validate_nested -> nla_validate_nested_deprecated

Using spatch, of course:
    @@
    expression TB, MAX, HEAD, LEN, POL, EXT;
    @@
    -nla_parse(TB, MAX, HEAD, LEN, POL, EXT)
    +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression TB, MAX, NLA, POL, EXT;
    @@
    -nla_parse_nested(TB, MAX, NLA, POL, EXT)
    +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT)

    @@
    expression START, MAX, POL, EXT;
    @@
    -nla_validate_nested(START, MAX, POL, EXT)
    +nla_validate_nested_deprecated(START, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, MAX, POL, EXT;
    @@
    -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT)
    +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT)

For this patch, don't actually add the strict, non-renamed versions
yet so that it breaks compile if I get it wrong.

Also, while at it, make nla_validate and nla_parse go down to a
common __nla_validate_parse() function to avoid code duplication.

Ultimately, this allows us to have very strict validation for every
new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the
next patch, while existing things will continue to work as is.

In effect then, this adds fully strict validation for any new command.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix undefined symbol issue in ecrdsa_generic module when ASN1
or OID_REGISTRY aren't enabled in the config by selecting these
options for CRYPTO_ECRDSA.

ERROR: "asn1_ber_decoder" [crypto/ecrdsa_generic.ko] undefined!
ERROR: "look_up_OID" [crypto/ecrdsa_generic.ko] undefined!

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Mark sm4 and missing aes using protected keys which are indetical to
same algs with no HW protected keys as tested.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.

With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP.  These would all need to be fixed if any shash algorithm
actually started sleeping.  For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API.  However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.

Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk.  It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.

Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The crypto_yield() in shash_ahash_digest() occurs after the entire
digest operation already happened, so there's no real point.  Remove it.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

CCM instances can be created by either the "ccm" template, which only
allows choosing the block cipher, e.g. "ccm(aes)"; or by "ccm_base",
which allows choosing the ctr and cbcmac implementations, e.g.
"ccm_base(ctr(aes-generic),cbcmac(aes-generic))".

However, a "ccm_base" instance prevents a "ccm" instance from being
registered using the same implementations.  Nor will the instance be
found by lookups of "ccm".  This can be used as a denial of service.
Moreover, "ccm_base" instances are never tested by the crypto
self-tests, even if there are compatible "ccm" tests.

The root cause of these problems is that instances of the two templates
use different cra_names.  Therefore, fix these problems by making
"ccm_base" instances set the same cra_name as "ccm" instances, e.g.
"ccm(aes)" instead of "ccm_base(ctr(aes-generic),cbcmac(aes-generic))".

This requires extracting the block cipher name from the name of the ctr
and cbcmac algorithms.  It also requires starting to verify that the
algorithms are really ctr and cbcmac using the same block cipher, not
something else entirely.  But it would be bizarre if anyone were
actually using non-ccm-compatible algorithms with ccm_base, so this
shouldn't break anyone in practice.

Fixes: 4a49b499dfa0 ("[CRYPTO] ccm: Added CCM mode")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

GCM instances can be created by either the "gcm" template, which only
allows choosing the block cipher, e.g. "gcm(aes)"; or by "gcm_base",
which allows choosing the ctr and ghash implementations, e.g.
"gcm_base(ctr(aes-generic),ghash-generic)".

However, a "gcm_base" instance prevents a "gcm" instance from being
registered using the same implementations.  Nor will the instance be
found by lookups of "gcm".  This can be used as a denial of service.
Moreover, "gcm_base" instances are never tested by the crypto
self-tests, even if there are compatible "gcm" tests.

The root cause of these problems is that instances of the two templates
use different cra_names.  Therefore, fix these problems by making
"gcm_base" instances set the same cra_name as "gcm" instances, e.g.
"gcm(aes)" instead of "gcm_base(ctr(aes-generic),ghash-generic)".

This requires extracting the block cipher name from the name of the ctr
algorithm.  It also requires starting to verify that the algorithms are
really ctr and ghash, not something else entirely.  But it would be
bizarre if anyone were actually using non-gcm-compatible algorithms with
gcm_base, so this shouldn't break anyone in practice.

Fixes: d00aa19b507b ("[CRYPTO] gcm: Allow block cipher parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>