<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/crypto/michael_mic.c, branch v5.9</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>crypto: remove CRYPTO_TFM_RES_BAD_KEY_LEN</title>
<updated>2020-01-09T03:30:53+00:00</updated>
<author>
<name>Eric Biggers</name>
<email>ebiggers@google.com</email>
</author>
<published>2019-12-31T03:19:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=674f368a952c48ede71784935a799a5205b92b6c'/>
<id>674f368a952c48ede71784935a799a5205b92b6c</id>
<content type='text'>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the -&gt;setkey() functions provide more information about errors.

However, no one actually checks for this flag, which makes it pointless.

Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc.  But there are probably
many more in arch/*/crypto/ and drivers/crypto/.

Some algorithms can even set this flag when the key is the correct
length.  For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.

So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly.  But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.

So just remove this flag.

Signed-off-by: Eric Biggers &lt;ebiggers@google.com&gt;
Reviewed-by: Horia Geantă &lt;horia.geanta@nxp.com&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the -&gt;setkey() functions provide more information about errors.

However, no one actually checks for this flag, which makes it pointless.

Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc.  But there are probably
many more in arch/*/crypto/ and drivers/crypto/.

Some algorithms can even set this flag when the key is the correct
length.  For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.

So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly.  But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.

So just remove this flag.

Signed-off-by: Eric Biggers &lt;ebiggers@google.com&gt;
Reviewed-by: Horia Geantă &lt;horia.geanta@nxp.com&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6</title>
<updated>2019-07-09T03:57:08+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-07-09T03:57:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4d2fa8b44b891f0da5ceda3e5a1402ccf0ab6f26'/>
<id>4d2fa8b44b891f0da5ceda3e5a1402ccf0ab6f26</id>
<content type='text'>
Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 5.3:

  API:
   - Test shash interface directly in testmgr
   - cra_driver_name is now mandatory

  Algorithms:
   - Replace arc4 crypto_cipher with library helper
   - Implement 5 way interleave for ECB, CBC and CTR on arm64
   - Add xxhash
   - Add continuous self-test on noise source to drbg
   - Update jitter RNG

  Drivers:
   - Add support for SHA204A random number generator
   - Add support for 7211 in iproc-rng200
   - Fix fuzz test failures in inside-secure
   - Fix fuzz test failures in talitos
   - Fix fuzz test failures in qat"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
  crypto: stm32/hash - remove interruptible condition for dma
  crypto: stm32/hash - Fix hmac issue more than 256 bytes
  crypto: stm32/crc32 - rename driver file
  crypto: amcc - remove memset after dma_alloc_coherent
  crypto: ccp - Switch to SPDX license identifiers
  crypto: ccp - Validate the the error value used to index error messages
  crypto: doc - Fix formatting of new crypto engine content
  crypto: doc - Add parameter documentation
  crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
  crypto: arm64/aes-ce - add 5 way interleave routines
  crypto: talitos - drop icv_ool
  crypto: talitos - fix hash on SEC1.
  crypto: talitos - move struct talitos_edesc into talitos.h
  lib/scatterlist: Fix mapping iterator when sg-&gt;offset is greater than PAGE_SIZE
  crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
  crypto: asymmetric_keys - select CRYPTO_HASH where needed
  crypto: serpent - mark __serpent_setkey_sbox noinline
  crypto: testmgr - dynamically allocate crypto_shash
  crypto: testmgr - dynamically allocate testvec_config
  crypto: talitos - eliminate unneeded 'done' functions at build time
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 5.3:

  API:
   - Test shash interface directly in testmgr
   - cra_driver_name is now mandatory

  Algorithms:
   - Replace arc4 crypto_cipher with library helper
   - Implement 5 way interleave for ECB, CBC and CTR on arm64
   - Add xxhash
   - Add continuous self-test on noise source to drbg
   - Update jitter RNG

  Drivers:
   - Add support for SHA204A random number generator
   - Add support for 7211 in iproc-rng200
   - Fix fuzz test failures in inside-secure
   - Fix fuzz test failures in talitos
   - Fix fuzz test failures in qat"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
  crypto: stm32/hash - remove interruptible condition for dma
  crypto: stm32/hash - Fix hmac issue more than 256 bytes
  crypto: stm32/crc32 - rename driver file
  crypto: amcc - remove memset after dma_alloc_coherent
  crypto: ccp - Switch to SPDX license identifiers
  crypto: ccp - Validate the the error value used to index error messages
  crypto: doc - Fix formatting of new crypto engine content
  crypto: doc - Add parameter documentation
  crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
  crypto: arm64/aes-ce - add 5 way interleave routines
  crypto: talitos - drop icv_ool
  crypto: talitos - fix hash on SEC1.
  crypto: talitos - move struct talitos_edesc into talitos.h
  lib/scatterlist: Fix mapping iterator when sg-&gt;offset is greater than PAGE_SIZE
  crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
  crypto: asymmetric_keys - select CRYPTO_HASH where needed
  crypto: serpent - mark __serpent_setkey_sbox noinline
  crypto: testmgr - dynamically allocate crypto_shash
  crypto: testmgr - dynamically allocate testvec_config
  crypto: talitos - eliminate unneeded 'done' functions at build time
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500</title>
<updated>2019-06-19T15:09:55+00:00</updated>
<author>
<name>Thomas Gleixner</name>
<email>tglx@linutronix.de</email>
</author>
<published>2019-06-04T08:11:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d2912cb15bdda8ba4a5dd73396ad62641af2f520'/>
<id>d2912cb15bdda8ba4a5dd73396ad62641af2f520</id>
<content type='text'>
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Enrico Weigelt &lt;info@metux.net&gt;
Reviewed-by: Kate Stewart &lt;kstewart@linuxfoundation.org&gt;
Reviewed-by: Allison Randal &lt;allison@lohutok.net&gt;
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Enrico Weigelt &lt;info@metux.net&gt;
Reviewed-by: Kate Stewart &lt;kstewart@linuxfoundation.org&gt;
Reviewed-by: Allison Randal &lt;allison@lohutok.net&gt;
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>crypto: make all generic algorithms set cra_driver_name</title>
<updated>2019-06-13T06:31:39+00:00</updated>
<author>
<name>Eric Biggers</name>
<email>ebiggers@google.com</email>
</author>
<published>2019-06-03T05:40:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d6ebf5286f8f94a254a8c90d4b9f2a8b076a8634'/>
<id>d6ebf5286f8f94a254a8c90d4b9f2a8b076a8634</id>
<content type='text'>
Most generic crypto algorithms declare a driver name ending in
"-generic".  The rest don't declare a driver name and instead rely on
the crypto API automagically appending "-generic" upon registration.

Having multiple conventions is unnecessarily confusing and makes it
harder to grep for all generic algorithms in the kernel source tree.
But also, allowing NULL driver names is problematic because sometimes
people fail to set it, e.g. the case fixed by commit 417980364300
("crypto: cavium/zip - fix collision with generic cra_driver_name").

Of course, people can also incorrectly name their drivers "-generic".
But that's much easier to notice / grep for.

Therefore, let's make cra_driver_name mandatory.  In preparation for
this, this patch makes all generic algorithms set cra_driver_name.

Signed-off-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Most generic crypto algorithms declare a driver name ending in
"-generic".  The rest don't declare a driver name and instead rely on
the crypto API automagically appending "-generic" upon registration.

Having multiple conventions is unnecessarily confusing and makes it
harder to grep for all generic algorithms in the kernel source tree.
But also, allowing NULL driver names is problematic because sometimes
people fail to set it, e.g. the case fixed by commit 417980364300
("crypto: cavium/zip - fix collision with generic cra_driver_name").

Of course, people can also incorrectly name their drivers "-generic".
But that's much easier to notice / grep for.

Therefore, let's make cra_driver_name mandatory.  In preparation for
this, this patch makes all generic algorithms set cra_driver_name.

Signed-off-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>crypto: run initcalls for generic implementations earlier</title>
<updated>2019-04-18T14:15:03+00:00</updated>
<author>
<name>Eric Biggers</name>
<email>ebiggers@google.com</email>
</author>
<published>2019-04-12T04:57:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=c4741b23059794bd99beef0f700103b0d983b3fd'/>
<id>c4741b23059794bd99beef0f700103b0d983b3fd</id>
<content type='text'>
Use subsys_initcall for registration of all templates and generic
algorithm implementations, rather than module_init.  Then change
cryptomgr to use arch_initcall, to place it before the subsys_initcalls.

This is needed so that when both a generic and optimized implementation
of an algorithm are built into the kernel (not loadable modules), the
generic implementation is registered before the optimized one.
Otherwise, the self-tests for the optimized implementation are unable to
allocate the generic implementation for the new comparison fuzz tests.

Note that on arm, a side effect of this change is that self-tests for
generic implementations may run before the unaligned access handler has
been installed.  So, unaligned accesses will crash the kernel.  This is
arguably a good thing as it makes it easier to detect that type of bug.

Signed-off-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Use subsys_initcall for registration of all templates and generic
algorithm implementations, rather than module_init.  Then change
cryptomgr to use arch_initcall, to place it before the subsys_initcalls.

This is needed so that when both a generic and optimized implementation
of an algorithm are built into the kernel (not loadable modules), the
generic implementation is registered before the optimized one.
Otherwise, the self-tests for the optimized implementation are unable to
allocate the generic implementation for the new comparison fuzz tests.

Note that on arm, a side effect of this change is that self-tests for
generic implementations may run before the unaligned access handler has
been installed.  So, unaligned accesses will crash the kernel.  This is
arguably a good thing as it makes it easier to detect that type of bug.

Signed-off-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>crypto: prefix module autoloading with "crypto-"</title>
<updated>2014-11-24T14:43:57+00:00</updated>
<author>
<name>Kees Cook</name>
<email>keescook@chromium.org</email>
</author>
<published>2014-11-21T01:05:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=5d26a105b5a73e5635eae0629b42fa0a90e07b7b'/>
<id>5d26a105b5a73e5635eae0629b42fa0a90e07b7b</id>
<content type='text'>
This prefixes all crypto module loading with "crypto-" so we never run
the risk of exposing module auto-loading to userspace via a crypto API,
as demonstrated by Mathias Krause:

https://lkml.org/lkml/2013/3/4/70

Signed-off-by: Kees Cook &lt;keescook@chromium.org&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This prefixes all crypto module loading with "crypto-" so we never run
the risk of exposing module auto-loading to userspace via a crypto API,
as demonstrated by Mathias Krause:

https://lkml.org/lkml/2013/3/4/70

Signed-off-by: Kees Cook &lt;keescook@chromium.org&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>crypto: michael_mic - Switch to shash</title>
<updated>2008-12-25T00:02:24+00:00</updated>
<author>
<name>Adrian-Ken Rueegsegger</name>
<email>ken@codelabs.ch</email>
</author>
<published>2008-12-07T11:35:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=19e2bf146759aea38fd6c2daea08cb7a6367149b'/>
<id>19e2bf146759aea38fd6c2daea08cb7a6367149b</id>
<content type='text'>
This patch changes michael_mic to the new shash interface.

Signed-off-by: Adrian-Ken Rueegsegger &lt;ken@codelabs.ch&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This patch changes michael_mic to the new shash interface.

Signed-off-by: Adrian-Ken Rueegsegger &lt;ken@codelabs.ch&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>[PATCH] Update my email address from jkmaline@cc.hut.fi to j@w1.fi</title>
<updated>2007-04-28T15:01:01+00:00</updated>
<author>
<name>Jouni Malinen</name>
<email>j@w1.fi</email>
</author>
<published>2007-03-25T00:15:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=85d32e7b0ea53a11d2a4018d8ad2605052778df7'/>
<id>85d32e7b0ea53a11d2a4018d8ad2605052778df7</id>
<content type='text'>
After 13 years of use, it looks like my email address is finally going
to disappear. While this is likely to drop the amount of incoming spam
greatly ;-), it may also affect more appropriate messages, so let's
update my email address in various places. In addition, Host AP mailing
list is subscribers-only and linux-wireless can also be used for
discussing issues related to this driver which is now shown in
MAINTAINERS.

Signed-off-by: Jouni Malinen &lt;j@w1.fi&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
After 13 years of use, it looks like my email address is finally going
to disappear. While this is likely to drop the amount of incoming spam
greatly ;-), it may also affect more appropriate messages, so let's
update my email address in various places. In addition, Host AP mailing
list is subscribers-only and linux-wireless can also be used for
discussing issues related to this driver which is now shown in
MAINTAINERS.

Signed-off-by: Jouni Malinen &lt;j@w1.fi&gt;
Signed-off-by: John W. Linville &lt;linville@tuxdriver.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>[CRYPTO] api: Get rid of flags argument to setkey</title>
<updated>2006-09-21T01:41:02+00:00</updated>
<author>
<name>Herbert Xu</name>
<email>herbert@gondor.apana.org.au</email>
</author>
<published>2006-08-13T04:16:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=560c06ae1ab7c677002ea3b6ac83521bf12ee07d'/>
<id>560c06ae1ab7c677002ea3b6ac83521bf12ee07d</id>
<content type='text'>
Now that the tfm is passed directly to setkey instead of the ctx, we no
longer need to pass the &amp;tfm-&gt;crt_flags pointer.

This patch also gets rid of a few unnecessary checks on the key length
for ciphers as the cipher layer guarantees that the key length is within
the bounds specified by the algorithm.

Rather than testing dia_setkey every time, this patch does it only once
during crypto_alloc_tfm.  The redundant check from crypto_digest_setkey
is also removed.

Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Now that the tfm is passed directly to setkey instead of the ctx, we no
longer need to pass the &amp;tfm-&gt;crt_flags pointer.

This patch also gets rid of a few unnecessary checks on the key length
for ciphers as the cipher layer guarantees that the key length is within
the bounds specified by the algorithm.

Rather than testing dia_setkey every time, this patch does it only once
during crypto_alloc_tfm.  The redundant check from crypto_digest_setkey
is also removed.

Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>[CRYPTO] all: Pass tfm instead of ctx to algorithms</title>
<updated>2006-06-26T07:34:39+00:00</updated>
<author>
<name>Herbert Xu</name>
<email>herbert@gondor.apana.org.au</email>
</author>
<published>2006-05-16T12:09:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=6c2bb98bc33ae33c7a33a133a4cd5a06395fece5'/>
<id>6c2bb98bc33ae33c7a33a133a4cd5a06395fece5</id>
<content type='text'>
Up until now algorithms have been happy to get a context pointer since
they know everything that's in the tfm already (e.g., alignment, block
size).

However, once we have parameterised algorithms, such information will
be specific to each tfm.  So the algorithm API needs to be changed to
pass the tfm structure instead of the context pointer.

This patch is basically a text substitution.  The only tricky bit is
the assembly routines that need to get the context pointer offset
through asm-offsets.h.

Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Up until now algorithms have been happy to get a context pointer since
they know everything that's in the tfm already (e.g., alignment, block
size).

However, once we have parameterised algorithms, such information will
be specific to each tfm.  So the algorithm API needs to be changed to
pass the tfm structure instead of the context pointer.

This patch is basically a text substitution.  The only tricky bit is
the assembly routines that need to get the context pointer offset
through asm-offsets.h.

Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</pre>
</div>
</content>
</entry>
</feed>
