Since crc32_generic.c and crc32c_generic.c now expose both the generic
and architecture-optimized implementations via the crypto_shash API,
rather than just the generic implementations as they originally did,
remove the "generic" part of the filenames and module names:

    crypto/crc32-generic.c => crypto/crc32.c
    crypto/crc32c-generic.c => crypto/crc32c.c
    crc32-generic.ko => crc32-cryptoapi.ko
    crc32c-generic.ko => crc32c-cryptoapi.ko

The reason for adding the -cryptoapi suffixes to the module names is to
avoid a module name collision with crc32.ko which is the library API.

We could instead rename the library module to libcrc32.ko.  However,
while lib/crypto/ uses that convention, the rest of lib/ doesn't.  Since
the library API is the primary API for CRC-32, I'd like to keep the
unsuffixed name for it and make the Crypto API modules use a suffix.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250428162458.29732-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

Following the standardization on crc32c() as the lib entry point for the
Castagnoli CRC32 instead of the previous mix of crc32c(), crc32c_le(),
and __crc32c_le(), make the same change to the underlying base and arch
functions that implement it.

Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

For historical reasons, the Castagnoli CRC32 is available under 3 names:
crc32c(), crc32c_le(), and __crc32c_le().  Most callers use crc32c().
The more verbose versions are not really warranted; there is no "_be"
version that the "_le" version needs to be differentiated from, and the
leading underscores are pointless.

Therefore, let's standardize on just crc32c().  Remove the other two
names, and update callers accordingly.

Specifically, the new crc32c() comes from what was previously
__crc32c_le(), so compared to the old crc32c() it now takes a size_t
length rather than unsigned int, and it's now in linux/crc32.h instead
of just linux/crc32c.h (which includes linux/crc32.h).

Later patches will also rename __crc32c_le_combine(), crc32c_le_base(),
and crc32c_le_arch().

Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

Instead of registering the crc32-$arch and crc32c-$arch algorithms if
the arch-specific code was built, only register them when that code was
built *and* is not falling back to the base implementation at runtime.

This avoids confusing users like btrfs which checks the shash driver
name to determine whether it is crc32c-generic.

(It would also make sense to change btrfs to test the crc32_optimization
flags itself, so that it doesn't have to use the weird hack of parsing
the driver name.  This change still makes sense either way though.)

Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20241202010844.144356-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

Currently the CRC32 library functions are defined as weak symbols, and
the arm64 and riscv architectures override them.

This method of arch-specific overrides has the limitation that it only
works when both the base and arch code is built-in.  Also, it makes the
arch-specific code be silently not used if it is accidentally built with
lib-y instead of obj-y; unfortunately the RISC-V code does this.

This commit reorganizes the code to have explicit *_arch() functions
that are called when they are enabled, similar to how some of the crypto
library code works (e.g. chacha_crypt() calls chacha_crypt_arch()).

Make the existing kconfig choice for the CRC32 implementation also
control whether the arch-optimized implementation (if one is available)
is enabled or not.  Make it enabled by default if CRC32 is also enabled.

The result is that arch-optimized CRC32 library functions will be
included automatically when appropriate, but it is now possible to
disable them.  They can also now be built as a loadable module if the
CRC32 library functions happen to be used only by loadable modules, in
which case the arch and base CRC32 modules will be automatically loaded
via direct symbol dependency when appropriate.

Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20241202010844.144356-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

Remove the leading underscores from __crc32c_le_base().

This is in preparation for adding crc32c_le_arch() and eventually
renaming __crc32c_le() to crc32c_le().

Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20241202010844.144356-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

Pull crypto updates from Herbert Xu:
 "API:
   - Add sig driver API
   - Remove signing/verification from akcipher API
   - Move crypto_simd_disabled_for_test to lib/crypto
   - Add WARN_ON for return values from driver that indicates memory
     corruption

  Algorithms:
   - Provide crc32-arch and crc32c-arch through Crypto API
   - Optimise crc32c code size on x86
   - Optimise crct10dif on arm/arm64
   - Optimise p10-aes-gcm on powerpc
   - Optimise aegis128 on x86
   - Output full sample from test interface in jitter RNG
   - Retry without padata when it fails in pcrypt

  Drivers:
   - Add support for Airoha EN7581 TRNG
   - Add support for STM32MP25x platforms in stm32
   - Enable iproc-r200 RNG driver on BCMBCA
   - Add Broadcom BCM74110 RNG driver"

* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
  crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
  crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
  crypto: aesni - Move back to module_init
  crypto: lib/mpi - Export mpi_set_bit
  crypto: aes-gcm-p10 - Use the correct bit to test for P10
  hwrng: amd - remove reference to removed PPC_MAPLE config
  crypto: arm/crct10dif - Implement plain NEON variant
  crypto: arm/crct10dif - Macroify PMULL asm code
  crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
  crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
  crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
  crypto: arm64/crct10dif - Remove obsolete chunking logic
  crypto: bcm - add error check in the ahash_hmac_init function
  crypto: caam - add error check to caam_rsa_set_priv_key_form
  hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
  dt-bindings: rng: add binding for BCM74110 RNG
  padata: Clean up in padata_do_multithreaded()
  crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
  crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
  crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
  ...

crc32c-generic is currently backed by the architecture's CRC-32c library
code, which may offer a variety of implementations depending on the
capabilities of the platform. These are not covered by the crypto
subsystem's fuzz testing capabilities because crc32c-generic is the
reference driver that the fuzzing logic uses as a source of truth.

Fix this by providing a crc32c-arch implementation which is based on the
arch library code if available, and modify crc32c-generic so it is
always based on the generic C implementation. If the arch has no CRC-32c
library code, this change does nothing.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

Drop the doubled word "the".
Change "at at" to "at a".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>