linux.git/block, branch v6.6-rc2

blk-mq: fix tags UAF when shrinking q->nr_hw_queues

2023-09-11T22:17:34+00:00

When nr_hw_queues shrink, we free the excess tags before realloc'ing
hw_ctxs for each queue. During that resize, we may need to access those
tags, like blk_mq_tag_idle(hctx) will access queue shared tags.

This can cause a slab use-after-free, as reported by KASAN. Fix it by
moving the releasing of excess tags to the end.

Fixes: e1dd7bc93029 ("blk-mq: fix tags leak when shrink nr_hw_queues")
Reported-by: Yi Zhang 
Closes: https://lore.kernel.org/all/CAHj4cs_CK63uoDpGBGZ6DN4OCTpzkR3UaVgK=LX8Owr8ej2ieQ@mail.gmail.com/
Cc: Ming Lei 
Signed-off-by: Chengming Zhou 
Reviewed-by: Hannes Reinecke 
Link: https://lore.kernel.org/r/20230908005702.2183908-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe

block: fix pin count management when merging same-page segments

2023-09-06T13:32:27+00:00

There is no need to unpin the added page when adding it to the bio fails
as that is done by the loop below.  Instead we want to unpin it when adding
a single page to the bio more than once as bio_release_pages will only
unpin it once.

Fixes: d1916c86ccdc ("block: move same page handling from __bio_add_pc_page to the callers")
Signed-off-by: Christoph Hellwig 
Reviewed-by: Damien Le Moal 
Link: https://lore.kernel.org/r/20230905124731.328255-1-hch@lst.de
Signed-off-by: Jens Axboe

block: don't add or resize partition on the disk with GENHD_FL_NO_PART

2023-08-31T14:00:35+00:00

Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") remove
disk_expand_part_tbl() in add_partition(), which means all kinds of
devices will support extended dynamic `dev_t`.
However, some devices with GENHD_FL_NO_PART are not expected to add or
resize partition.
Fix this by adding check of GENHD_FL_NO_PART before add or resize
partition.

Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Li Lingfeng 
Reviewed-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/20230831075900.1725842-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe

block: remove the call to file_remove_privs in blkdev_write_iter

2023-08-31T14:00:23+00:00

file_remove_privs instantly returns 0 when not called for regular files,
so don't bother.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Johannes Thumshirn 
Link: https://lore.kernel.org/r/20230831121911.280155-1-hch@lst.de
Signed-off-by: Jens Axboe

blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice()

2023-08-30T16:15:01+00:00

Currently, 'carryover_ios/bytes' is not handled in throtl_trim_slice(),
for consequence, 'carryover_ios/bytes' will be used to throttle bio
multiple times, for example:

1) set iops limit to 100, and slice start is 0, slice end is 100ms;
2) current time is 0, and 10 ios are dispatched, those io won't be
   throttled and io_disp is 10;
3) still at current time 0, update iops limit to 1000, carryover_ios is
   updated to (0 - 10) = -10;
4) in this slice(0 - 100ms), io_allowed = 100 + (-10) = 90, which means
   only 90 ios can be dispatched without waiting;
5) assume that io is throttled in slice(0 - 100ms), and
   throtl_trim_slice() update silce to (100ms - 200ms). In this case,
   'carryover_ios/bytes' is not cleared and still only 90 ios can be
   dispatched between 100ms - 200ms.

Fix this problem by updating 'carryover_ios/bytes' in
throtl_trim_slice().

Fixes: a880ae93e5b5 ("blk-throttle: fix io hung due to configuration updates")
Reported-by: zhuxiaohui 
Link: https://lore.kernel.org/all/20230812072116.42321-1-zhuxiaohui.400@bytedance.com/
Signed-off-by: Yu Kuai 
Acked-by: Tejun Heo 
Link: https://lore.kernel.org/r/20230816012708.1193747-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe

blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice()

2023-08-30T16:15:01+00:00

There are no functional changes, just make the code cleaner.

Signed-off-by: Yu Kuai 
Acked-by: Tejun Heo 
Link: https://lore.kernel.org/r/20230816012708.1193747-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe

blk-throttle: fix wrong comparation while 'carryover_ios/bytes' is negative

2023-08-30T16:15:01+00:00

carryover_ios/bytes[] can be negative in the case that ios are
dispatched in the slice in advance, and then configuration is updated.
For example:

1) set iops limit to 1000, and slice start is 0, slice end is 100ms;
2) current time is 0, and 100 ios are dispatched, those ios will not be
   throttled, hence io_disp is 100;
3) still at current time 0, update iops limit to 100, then carryover_ios
   is (0 - 100) = -100;
4) then, dispatch a new io at time 0, the expected result is that this
   io will wait for 1s. The calculation in tg_within_iops_limit:

   io_disp = 0;
   io_allowed = calculate_io_allowed + carryover_ios
	      = 10 + (-100) = -90;
   io won't be throttled if (io_disp + 1 < io_allowed) passed.

Before this patch, in step 4) (io_disp + 1 < io_allowed) is passed,
because -90 for unsigned value is very huge, and such io won't be
throttled.

Fix this problem by checking if 'io/bytes_allowed' is negative first.

Signed-off-by: Yu Kuai 
Acked-by: Tejun Heo 
Link: https://lore.kernel.org/r/20230816012708.1193747-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe

blk-throttle: print signed value 'carryover_bytes/ios' for user

2023-08-30T16:15:01+00:00

'carryover_bytes/ios' can be negative, indicate that some bio is
dispatched in advance within slice while configuration is updated.
Print a huge value is not user-friendly.

Signed-off-by: Yu Kuai 
Acked-by: Tejun Heo 
Link: https://lore.kernel.org/r/20230816012708.1193747-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe

Merge tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux

2023-08-30T03:21:42+00:00

Pull block updates from Jens Axboe:
 "Pretty quiet round for this release. This contains:

   - Add support for zoned storage to ublk (Andreas, Ming)

   - Series improving performance for drivers that mark themselves as
     needing a blocking context for issue (Bart)

   - Cleanup the flush logic (Chengming)

   - sed opal keyring support (Greg)

   - Fixes and improvements to the integrity support (Jinyoung)

   - Add some exports for bcachefs that we can hopefully delete again in
     the future (Kent)

   - deadline throttling fix (Zhiguo)

   - Series allowing building the kernel without buffer_head support
     (Christoph)

   - Sanitize the bio page adding flow (Christoph)

   - Write back cache fixes (Christoph)

   - MD updates via Song:
      - Fix perf regression for raid0 large sequential writes (Jan)
      - Fix split bio iostat for raid0 (David)
      - Various raid1 fixes (Heinz, Xueshi)
      - raid6test build fixes (WANG)
      - Deprecate bitmap file support (Christoph)
      - Fix deadlock with md sync thread (Yu)
      - Refactor md io accounting (Yu)
      - Various non-urgent fixes (Li, Yu, Jack)

   - Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
     Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"

* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
  block: use strscpy() to instead of strncpy()
  block: sed-opal: keyring support for SED keys
  block: sed-opal: Implement IOC_OPAL_REVERT_LSP
  block: sed-opal: Implement IOC_OPAL_DISCOVERY
  blk-mq: prealloc tags when increase tagset nr_hw_queues
  blk-mq: delete redundant tagset map update when fallback
  blk-mq: fix tags leak when shrink nr_hw_queues
  ublk: zoned: support REQ_OP_ZONE_RESET_ALL
  md: raid0: account for split bio in iostat accounting
  md/raid0: Fix performance regression for large sequential writes
  md/raid0: Factor out helper for mapping and submitting a bio
  md raid1: allow writebehind to work on any leg device set WriteMostly
  md/raid1: hold the barrier until handle_read_error() finishes
  md/raid1: free the r1bio before waiting for blocked rdev
  md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
  blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
  drivers/rnbd: restore sysfs interface to rnbd-client
  md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
  raid6: test: only check for Altivec if building on powerpc hosts
  raid6: test: make sure all intermediate and artifact files are .gitignored
  ...

Merge tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

2023-08-28T18:04:18+00:00

Pull superblock updates from Christian Brauner:
"This contains the super rework that was ready for this cycle. The
first part changes the order of how we open block devices and allocate
superblocks, contains various cleanups, simplifications, and a new
mechanism to wait on superblock state changes.

This unblocks work to ultimately limit the number of writers to a
block device. Jan has already scheduled follow-up work that will be
ready for v6.7 and allows us to restrict the number of writers to a
given block device. That series builds on this work right here.

The second part contains filesystem freezing updates.

Overview:

The generic superblock changes are rougly organized as follows
(ignoring additional minor cleanups):

(1) Removal of the bd_super member from struct block_device.

This was a very odd back pointer to struct super_block with
unclear rules. For all relevant places we have other means to get
the same information so just get rid of this.

(2) Simplify rules for superblock cleanup.

Roughly, everything that is allocated during fs_context
initialization and that's stored in fs_context->s_fs_info needs
to be cleaned up by the fs_context->free() implementation before
the superblock allocation function has been called successfully.

After sget_fc() returned fs_context->s_fs_info has been
transferred to sb->s_fs_info at which point sb->kill_sb() if
fully responsible for cleanup. Adhering to these rules means that
cleanup of sb->s_fs_info in fill_super() is to be avoided as it's
brittle and inconsistent.

Cleanup shouldn't be duplicated between sb->put_super() as
sb->put_super() is only called if sb->s_root has been set aka
when the filesystem has been successfully born (SB_BORN). That
complexity should be avoided.

This also means that block devices are to be closed in
sb->kill_sb() instead of sb->put_super(). More details in the
lower section.

(3) Make it possible to lookup or create a superblock before opening
block devices

There's a subtle dependency on (2) as some filesystems did rely
on fill_super() to be called in order to correctly clean up
sb->s_fs_info. All these filesystems have been fixed.

(4) Switch most filesystem to follow the same logic as the generic
mount code now does as outlined in (3).

(5) Use the superblock as the holder of the block device. We can now
easily go back from block device to owning superblock.

(6) Export and extend the generic fs_holder_ops and use them as
holder ops everywhere and remove the filesystem specific holder
ops.

(7) Call from the block layer up into the filesystem layer when the
block device is removed, allowing to shut down the filesystem
without risk of deadlocks.

(8) Get rid of get_super().

We can now easily go back from the block device to owning
superblock and can call up from the block layer into the
filesystem layer when the device is removed. So no need to wade
through all registered superblock to find the owning superblock
anymore"

Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/

* tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits)
super: use higher-level helper for {freeze,thaw}
super: wait until we passed kill super
super: wait for nascent superblocks
super: make locking naming consistent
super: use locking helpers
fs: simplify invalidate_inodes
fs: remove get_super
block: call into the file system for ioctl BLKFLSBUF
block: call into the file system for bdev_mark_dead
block: consolidate __invalidate_device and fsync_bdev
block: drop the "busy inodes on changed media" log message
dasd: also call __invalidate_device when setting the device offline
amiflop: don't call fsync_bdev in FDFMTBEG
floppy: call disk_force_media_change when changing the format
block: simplify the disk_force_media_change interface
nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl
xfs use fs_holder_ops for the log and RT devices
xfs: drop s_umount over opening the log and RT devices
ext4: use fs_holder_ops for the log device
ext4: drop s_umount over opening the log device
...