Pull block fixes from Jens Axboe:

 - Fix for loop regressions (Mauricio)

 - Fix a potential stall with batched wakeups in sbitmap (David)

 - Fix for stall with recursive plug flushes (Ross)

 - Skip accounting of empty requests for blk-iocost (Chengming)

 - Remove a dead field in struct blk_mq_hw_ctx (Chengming)

* tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linux:
  loop: do not enforce max_loop hard limit by (new) default
  loop: deprecate autoloading callback loop_probe()
  sbitmap: fix batching wakeup
  blk-iocost: skip empty flush bio in iocost
  blk-mq: delete dead struct blk_mq_hw_ctx->queued field
  blk-mq: Fix stall due to recursive flush plug

The flush bio may have data, may have no data (empty flush), we couldn't
calculate cost for empty flush bio. So we'd better just skip it for now.

Another side effect is that empty flush bio's bio_end_sector() is 0, cause
iocg->cursor reset to 0, may break the cost calculation of other bios.

This isn't good enough, since flush bio still consume the device bandwidth,
but flush request is special, can be merged randomly in the flush state
machine, we don't know how to calculate cost for it for now.

Its completion time also has flaws, which may include the pre-flush or
post-flush completion time, but I don't know if we need to fix that and
how to fix it.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230720121441.1408522-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull SCSI fixes from James Bottomley:
 "This is a bunch of small driver fixes and a larger rework of zone disk
  handling (which reaches into blk and nvme).

  The aacraid array-bounds fix is now critical since the security people
  turned on -Werror for some build tests, which now fail without it"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: storvsc: Handle SRB status value 0x30
  scsi: block: Improve checks in blk_revalidate_disk_zones()
  scsi: block: virtio_blk: Set zone limits before revalidating zones
  scsi: block: nullblk: Set zone limits before revalidating zones
  scsi: nvme: zns: Set zone limits before revalidating zones
  scsi: sd_zbc: Set zone limits before revalidating zones
  scsi: ufs: core: Add support for qTimestamp attribute
  scsi: aacraid: Avoid -Warray-bounds warning
  scsi: ufs: ufs-mediatek: Add dependency for RESET_CONTROLLER
  scsi: ufs: core: Update contact email for monitor sysfs nodes
  scsi: scsi_debug: Remove dead code
  scsi: qla2xxx: Use vmalloc_array() and vcalloc()
  scsi: fnic: Use vmalloc_array() and vcalloc()
  scsi: qla2xxx: Fix error code in qla2x00_start_sp()
  scsi: qla2xxx: Silence a static checker warning
  scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()

We have seen rare IO stalls as follows:

* blk_mq_plug_issue_direct() is entered with an mq_list containing two
requests.
* For the first request, it sets last == false and enters the driver's
queue_rq callback.
* The driver queue_rq callback indirectly calls schedule() which calls
blk_flush_plug(). This may happen if the driver has the
BLK_MQ_F_BLOCKING flag set and is allowed to sleep in ->queue_rq.
* blk_flush_plug() handles the remaining request in the mq_list. mq_list
is now empty.
* The original call to queue_rq resumes (with last == false).
* The loop in blk_mq_plug_issue_direct() terminates because there are no
remaining requests in mq_list.

The IO is now stalled because the last request submitted to the driver
had last == false and there was no subsequent call to commit_rqs().

Fix this by returning early in blk_mq_flush_plug_list() if rq_count is 0
which it will be in the recursive case, rather than checking if the
mq_list is empty. At the same time, adjust one of the callers to skip
the mq_list empty check as it is not necessary.

Fixes: dc5fc361d891 ("block: attempt direct issue of plug list")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230714101106.3635611-1-ross.lagerwall@citrix.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We used to insert the data commands following a pre-flush to the head
of the queue until commit 1e82fadfc6b ("blk-mq: do not do head insertions
post-pre-flush commands").  Not doing this seems to cause hangs of
such commands on NFS workloads when exported from file systems with
SATA SSDs.  I have no idea why this would starve these workloads,
but doing a semantic revert of this patch (which looks quite different
due to various other changes) fixes the hangs.

Fixes: 1e82fadfc6b ("blk-mq: do not do head insertions post-pre-flush commands")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230714143014.11879-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The iocost rely on rq start_time_ns and alloc_time_ns to tell saturation
state of the block device. Most of the time request is allocated after
rq_qos_throttle() and its alloc_time_ns or start_time_ns won't be affected.

But for plug batched allocation introduced by the commit 47c122e35d7e
("block: pre-allocate requests if plug is started and is a batch"), we can
rq_qos_throttle() after the allocation of the request. This is what the
blk_mq_get_cached_request() does.

In this case, the cached request alloc_time_ns or start_time_ns is much
ahead if blocked in any qos ->throttle().

Fix it by setting alloc_time_ns and start_time_ns to now when the allocated
request is actually used.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230710105516.2053478-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A bug was introduced in deadline_from_pos() while implementing the
suggestion to use round_down() in the following code:

	pos -= bdev_offset_from_zone_start(rq->q->disk->part0, pos);

This patch makes deadline_from_pos() use round_down() such that 'pos' is
rounded down.

Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/all/5zthzi3lppvcdp4nemum6qck4gpqbdhvgy4k3qwguhgzxc4quj@amulvgycq67h/
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Fixes: 0effb390c4ba ("block: mq-deadline: Handle requeued requests correctly")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230712173344.2994513-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull in the currently staged SCSI fixes for 6.5.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

blk_revalidate_disk_zones() implements checks of the zones of a zoned
block device, verifying that the zone size is a power of 2 number of
sectors, that all zones (except possibly the last one) have the same
size and that zones cover the entire addressing space of the device.

While these checks are appropriate to verify that well tested hardware
devices have an adequate zone configurations, they lack in certain areas
which may result in issues with emulated devices implemented with user
drivers such as ublk or tcmu. Specifically, this function does not
check if the device driver indicated support for the mandatory zone
append writes, that is, if the device max_zone_append_sectors queue
limit is set to a non-zero value. Additionally, invalid zones such as
a zero length zone with a start sector equal to the device capacity will
not be detected and result in out of bounds use of the zone bitmaps
prepared with the callback function blk_revalidate_zone_cb().

Improve blk_revalidate_disk_zones() to address these inadequate checks,
relying on the fact that all device drivers supporting zoned block
devices must set the device zone size (chunk_sectors queue limit) and
the max_zone_append_sectors queue limit before executing this function.

The check for a non-zero max_zone_append_sectors value is done in
blk_revalidate_disk_zones() before executing the zone report. The zone
report callback function blk_revalidate_zone_cb() is also modified to
add a check that a zone start is below the device capacity.

The check that the zone size is a power of 2 number of sectors is moved
to blk_revalidate_disk_zones() as the zone size is already known.
Similarly, the number of zones of the device can be calculated in
blk_revalidate_disk_zones() before executing the zone report.

The kdoc comment for blk_revalidate_disk_zones() is also updated to
mention that device drivers must set the device zone size and the
max_zone_append_sectors queue limit before calling this function.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230703024812.76778-6-dlemoal@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When a device-mapper device is passing through the inline encryption
support of an underlying device, calls to blk_crypto_evict_key() take
the blk_crypto_profile::lock of the device-mapper device, then take the
blk_crypto_profile::lock of the underlying device (nested).  This isn't
a real deadlock, but it causes a lockdep report because there is only
one lock class for all instances of this lock.

Lockdep subclasses don't really work here because the hierarchy of block
devices is dynamic and could have more than 2 levels.

Instead, register a dynamic lock class for each blk_crypto_profile, and
associate that with the lock.

This avoids false-positive lockdep reports like the following:

    ============================================
    WARNING: possible recursive locking detected
    6.4.0-rc5 #2 Not tainted
    --------------------------------------------
    fscryptctl/1421 is trying to acquire lock:
    ffffff80829ca418 (&profile->lock){++++}-{3:3}, at: __blk_crypto_evict_key+0x44/0x1c0

                   but task is already holding lock:
    ffffff8086b68ca8 (&profile->lock){++++}-{3:3}, at: __blk_crypto_evict_key+0xc8/0x1c0

                   other info that might help us debug this:
     Possible unsafe locking scenario:

           CPU0
           ----
      lock(&profile->lock);
      lock(&profile->lock);

                    *** DEADLOCK ***

     May be due to missing lock nesting notation

Fixes: 1b2628397058 ("block: Keyslot Manager for Inline Encryption")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230610061139.212085-1-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>