Pull UML fix from Richard Weinberger:

 - Fix modular build for UML watchdog

* tag 'uml-for-linus-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
  um: harddog: fix modular build

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Plug a race in the stage-2 mapping code where the IPA and the PA
     would end up being out of sync

   - Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)

   - FP/SVE/SME documentation update, in the hope that this field
     becomes clearer...

   - Add workaround for Apple SEIS brokenness to a new SoC

   - Random comment fixes

  x86:

   - add MSR_IA32_TSX_CTRL into msrs_to_save

   - fixes for XCR0 handling in SGX enclaves

  Generic:

   - Fix vcpu_array[0] races

   - Fix race between starting a VM and 'reboot -f'"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save
  KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM)
  KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE
  KVM: Fix vcpu_array[0] races
  KVM: VMX: Fix header file dependency of asm/vmx.h
  KVM: Don't enable hardware after a restart/shutdown is initiated
  KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown
  KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations
  KVM: arm64: Clarify host SME state management
  KVM: arm64: Restructure check for SVE support in FP trap handler
  KVM: arm64: Document check for TIF_FOREIGN_FPSTATE
  KVM: arm64: Fix repeated words in comments
  KVM: arm64: Constify start/end/phys fields of the pgtable walker data
  KVM: arm64: Infer PA offset from VA in hyp map walker
  KVM: arm64: Infer the PA offset from IPA in stage-2 map walker
  KVM: arm64: Use the bitmap API to allocate bitmaps
  KVM: arm64: Slightly optimize flush_context()

Pull powerpc fixes from Michael Ellerman:

 - Fix broken soft dirty tracking when using the Radix MMU (>= P9)

 - Fix ISA mapping when "ranges" property is not present, for PASemi
   Nemo boards

 - Fix a possible WARN_ON_ONCE hitting in BPF extable handling

 - Fix incorrect DMA address handling when using 2MB TCEs

 - Fix a bug in IOMMU table handling for SR-IOV devices

 - Fix the recent rework of IOMMU handling which left arch code calling
   clean up routines that are handled by the IOMMU core

 - A few assorted build fixes

Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini,
Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali
Rohár, Randy Dunlap, and Rob Herring.

* tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device
  powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs
  powerpc/iommu: Remove iommu_del_device()
  powerpc/crypto: Fix aes-gcm-p10 build when VSX=n
  powerpc/bpf: populate extable entries only during the last pass
  powerpc/boot: Disable power10 features after BOOTAFLAGS assignment
  powerpc/64s/radix: Fix soft dirty tracking
  powerpc/fsl_uli1575: fix kconfig warnings and build errors
  powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present

Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to
save/restore the register value during migration. Missing this may cause
userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the
value to the target VM.

In addition, there is no need to add MSR_IA32_TSX_CTRL when
ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So
add the checking in kvm_probe_msr_to_save().

Fixes: c11f83e0626b ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20230509032348.1153070-1-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the
allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's
allowed XCR0 when emulating ECREATE.

Note, this could theoretically break a setup where userspace advertises
a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU
is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID
XFRM subleaf based on the guest's XCR0.

Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Explicitly check the vCPU's supported XCR0 when determining whether or not
the XFRM for ECREATE is valid.  Checking CPUID works because KVM updates
guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed
XCR0, but that is rather subtle and KVM should not modify guest CPUID
except for modeling true runtime behavior (allowed XFRM is most definitely
not "runtime" behavior).

Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull s390 fixes from Alexander Gordeev:

 - Add check whether the required facilities are installed before using
   the s390-specific ChaCha20 implementation

 - Key blobs for s390 protected key interface IOCTLs commands
   PKEY_VERIFYKEY2 and PKEY_VERIFYKEY3 may contain clear key material.
   Zeroize copies of these keys in kernel memory after creating
   protected keys

 - Set CONFIG_INIT_STACK_NONE=y in defconfigs to avoid extra overhead of
   initializing all stack variables by default

 - Make sure that when a new channel-path is enabled all subchannels are
   evaluated: with and without any devices connected on it

 - When SMT thread CPUs are added to CPU topology masks the nr_cpu_ids
   limit is not checked and could be exceeded. Respect the nr_cpu_ids
   limit and avoid a warning when CONFIG_DEBUG_PER_CPU_MAPS is set

 - The pointer to IPL Parameter Information Block is stored in the
   absolute lowcore as a virtual address. Save it as the physical
   address for later use by dump tools

 - Fix a Queued Direct I/O (QDIO) problem on z/VM guests using QIOASSIST
   with dedicated (pass through) QDIO-based devices such as FCP, real
   OSA or HiperSockets

 - s390's struct statfs and struct statfs64 contain padding, which
   field-by-field copying does not set. Initialize the respective
   structures with zeros before filling them and copying to userspace

 - Grow s390 compat_statfs64, statfs and statfs64 structures f_spare
   array member to cover padding and simplify things

 - Remove obsolete SCHED_BOOK and SCHED_DRAWER configs

 - Remove unneeded S390_CCW_IOMMU and S390_AP_IOM configs

* tag 's390-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/iommu: get rid of S390_CCW_IOMMU and S390_AP_IOMMU
  s390/Kconfig: remove obsolete configs SCHED_{BOOK,DRAWER}
  s390/uapi: cover statfs padding by growing f_spare
  statfs: enforce statfs[64] structure initialization
  s390/qdio: fix do_sqbs() inline assembly constraint
  s390/ipl: fix IPIB virtual vs physical address confusion
  s390/topology: honour nr_cpu_ids when adding CPUs
  s390/cio: include subchannels without devices also for evaluation
  s390/defconfigs: set CONFIG_INIT_STACK_NONE=y
  s390/pkey: zeroize key blobs
  s390/crypto: use vector instructions only if available for ChaCha20

Pull arm64 fixes from Will Deacon:
 "A mixture of compiler/static checker resolutions and a couple of MTE
  fixes:

   - Avoid erroneously marking untagged pages with PG_mte_tagged

   - Always reset KASAN tags for destination page in copy_page()

   - Mark PMU header functions 'static inline'

   - Fix some sparse warnings due to missing casts"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mte: Do not set PG_mte_tagged if tags were not initialized
  arm64: Also reset KASAN tag if page is not PG_mte_tagged
  arm64: perf: Mark all accessor functions inline
  ARM: perf: Mark all accessor functions inline
  arm64: vdso: Pass (void *) to virt_to_page()
  arm64/mm: mark private VM_FAULT_X defines as vm_fault_t

Include a definition of WARN_ON_ONCE() before using it.

Fixes: bb1fcc70d98f ("KVM: nVMX: Allow L1 to use 5-level page walks for nested EPT")
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jacob Xu <jacobhxu@google.com>
[reworded commit message; changed <asm/bug.h> to <linux/bug.h>]
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225012959.1554168-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull probes fixes from Masami Hiramatsu:

 - Initialize 'ret' local variables on fprobe_handler() to fix the
   smatch warning. With this, fprobe function exit handler is not
   working randomly.

 - Fix to use preempt_enable/disable_notrace for rethook handler to
   prevent recursive call of fprobe exit handler (which is based on
   rethook)

 - Fix recursive call issue on fprobe_kprobe_handler()

 - Fix to detect recursive call on fprobe_exit_handler()

 - Fix to make all arch-dependent rethook code notrace (the
   arch-independent code is already notrace)"

* tag 'probes-fixes-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rethook, fprobe: do not trace rethook related functions
  fprobe: add recursion detection in fprobe_exit_handler
  fprobe: make fprobe_kprobe_handler recursion free
  rethook: use preempt_{disable, enable}_notrace in rethook_trampoline_handler
  tracing: fprobe: Initialize ret valiable to fix smatch error