Pull x86 fixes from Borislav Petkov: - Start checking for -mindirect-branch-cs-prefix clang support too now that LLVM 16 will support it - Fix a NULL ptr deref when suspending with Xen PV - Have a SEV-SNP guest check explicitly for features enabled by the hypervisor and fail gracefully if some are unsupported by the guest instead of failing in a non-obvious and hard-to-debug way - Fix a MSI descriptor leakage under Xen - Mark Xen's MSI domain as supporting MSI-X - Prevent legacy PIC interrupts from being resent in software by marking them level triggered, as they should be, which lead to a NULL ptr deref * tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block acpi: Fix suspend with Xen PV x86/sev: Add SEV-SNP guest feature negotiation support x86/pci/xen: Fixup fallout from the PCI/MSI overhaul x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL
Pull RISC-V fixes from Palmer Dabbelt: - A few DT bindings fixes to more closely align the ISA string requirements between the bindings and the ISA manual. - A handful of build error/warning fixes. - A fix to move init_cpu_topology() later in the boot flow, so it can allocate memory. - The IRC channel is now in the MAINTAINERS file, so it's easier to find. * tag 'riscv-for-linus-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Move call to init_cpu_topology() to later initialization stage riscv/kprobe: Fix instruction simulation of JALR riscv: fix -Wundef warning for CONFIG_RISCV_BOOT_SPINWAIT MAINTAINERS: add an IRC entry for RISC-V RISC-V: fix compile error from deduplicated __ALTERNATIVE_CFG_2 dt-bindings: riscv: fix single letter canonical order dt-bindings: riscv: fix underscore requirement for multi-letter extensions
Pull ARM fixes from Russell King: - fix nommu assignment build warning - fix -Wundef preprocessor warning - reduce __thumb2__ definitions for crypto files that require it * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9287/1: Reduce __thumb2__ definition to crypto files that require it ARM: 9284/1: include <asm/pgtable.h> from proc-macros.S to fix -Wundef warnings ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignment
If "capacity-dmips-mhz" is present in a CPU DT node,
topology_parse_cpu_capacity() will fail to allocate memory. arm64, with
which this code path is shared, does not call
topology_parse_cpu_capacity() until later in boot where memory
allocation is available. While "capacity-dmips-mhz" is not yet a valid
property on RISC-V, invalid properties should be ignored rather than
cause issues. Move init_cpu_topology(), which calls
topology_parse_cpu_capacity(), to a later initialization stage, to match
arm64.
As a side effect of this change, RISC-V is "protected" from changes to
core topology code that would work on arm64 where memory allocation is
safe but on RISC-V isn't.
Fixes: 03f11f03dbfe ("RISC-V: Parse cpu topology during boot.")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Link: https://lore.kernel.org/r/20230105033705.3946130-1-leyfoon.tan@starfivetech.com
[Palmer: use Conor's commit text]
Link: https://lore.kernel.org/linux-riscv/20230104183033.755668-1-pierre.gondois@arm.com/T/#me592d4c8b9508642954839f0077288a353b0b9b2
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Set kprobe at 'jalr 1140(ra)' of vfs_write results in the following
crash:
[ 32.092235] Unable to handle kernel access to user memory without uaccess routines at virtual address 00aaaaaad77b1170
[ 32.093115] Oops [#1]
[ 32.093251] Modules linked in:
[ 32.093626] CPU: 0 PID: 135 Comm: ftracetest Not tainted 6.2.0-rc2-00013-gb0aa5e5df0cb-dirty #16
[ 32.093985] Hardware name: riscv-virtio,qemu (DT)
[ 32.094280] epc : ksys_read+0x88/0xd6
[ 32.094855] ra : ksys_read+0xc0/0xd6
[ 32.095016] epc : ffffffff801cda80 ra : ffffffff801cdab8 sp : ff20000000d7bdc0
[ 32.095227] gp : ffffffff80f14000 tp : ff60000080f9cb40 t0 : ffffffff80f13e80
[ 32.095500] t1 : ffffffff8000c29c t2 : ffffffff800dbc54 s0 : ff20000000d7be60
[ 32.095716] s1 : 0000000000000000 a0 : ffffffff805a64ae a1 : ffffffff80a83708
[ 32.095921] a2 : ffffffff80f160a0 a3 : 0000000000000000 a4 : f229b0afdb165300
[ 32.096171] a5 : f229b0afdb165300 a6 : ffffffff80eeebd0 a7 : 00000000000003ff
[ 32.096411] s2 : ff6000007ff76800 s3 : fffffffffffffff7 s4 : 00aaaaaad77b1170
[ 32.096638] s5 : ffffffff80f160a0 s6 : ff6000007ff76800 s7 : 0000000000000030
[ 32.096865] s8 : 00ffffffc3d97be0 s9 : 0000000000000007 s10: 00aaaaaad77c9410
[ 32.097092] s11: 0000000000000000 t3 : ffffffff80f13e48 t4 : ffffffff8000c29c
[ 32.097317] t5 : ffffffff8000c29c t6 : ffffffff800dbc54
[ 32.097505] status: 0000000200000120 badaddr: 00aaaaaad77b1170 cause: 000000000000000d
[ 32.098011] [<ffffffff801cdb72>] ksys_write+0x6c/0xd6
[ 32.098222] [<ffffffff801cdc06>] sys_write+0x2a/0x38
[ 32.098405] [<ffffffff80003c76>] ret_from_syscall+0x0/0x2
Since the rs1 and rd might be the same one, such as 'jalr 1140(ra)',
hence it requires obtaining the target address from rs1 followed by
updating rd.
Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230116064342.2092136-1-liaochang1@huawei.com
[Palmer: Pick Guo's cleanup]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Pass the correct address to mte_clear_page_tags() on initialising a
tagged page
- Plug a race against a GICv4.1 doorbell interrupt while saving the
vgic-v3 pending state.
x86:
- A command line parsing fix and a clang compilation fix for
selftests
- A fix for a longstanding VMX issue, that surprisingly was only
found now to affect real world guests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Make reclaim_period_ms input always be positive
KVM: x86/vmx: Do not skip segment attributes if unusable bit is set
selftests: kvm: move declaration at the beginning of main()
KVM: arm64: GICv4.1: Fix race with doorbell on VPE activation/deactivation
KVM: arm64: Pass the actual page address to mte_clear_page_tags()
Pull EFI fixes from Ard Biesheuvel:
"Another couple of EFI fixes, of which the first two were already in
-next when I sent out the previous PR, but they caused some issues on
non-EFI boots so I let them simmer for a bit longer.
- ensure the EFI ResetSystem and ACPI PRM calls are recognized as
users of the EFI runtime, and therefore protected against
exceptions
- account for the EFI runtime stack in the stacktrace code
- remove Matthew Garrett's MAINTAINERS entry for efivarfs"
* tag 'efi-fixes-for-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Remove Matthew Garrett as efivarfs maintainer
arm64: efi: Account for the EFI runtime stack in stack unwinder
arm64: efi: Avoid workqueue to check whether EFI runtime is live
Commit 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler") added
a __thumb2__ define to ASFLAGS to avoid build errors in the crypto code,
which relies on __thumb2__ for preprocessing. Commit 59e2cf8d21e0 ("ARM:
9275/1: Drop '-mthumb' from AFLAGS_ISA") followed up on this by removing
-mthumb from AFLAGS so that __thumb2__ would not be defined when the
default target was ARMv7 or newer.
Unfortunately, the second commit's fix assumes that the toolchain
defaults to -mno-thumb / -marm, which is not the case for Debian's
arm-linux-gnueabihf target, which defaults to -mthumb:
$ echo | arm-linux-gnueabihf-gcc -dM -E - | grep __thumb
#define __thumb2__ 1
#define __thumb__ 1
This target is used by several CI systems, which will still see
redefined macro warnings, despite '-mthumb' not being present in the
flags:
<command-line>: warning: "__thumb2__" redefined
<built-in>: note: this is the location of the previous definition
Remove the global AFLAGS __thumb2__ define and move it to the crypto
folder where it is required by the imported OpenSSL algorithms; the rest
of the kernel should use the internal CONFIG_THUMB2_KERNEL symbol to
know whether or not Thumb2 is being used or not. Be sure that __thumb2__
is undefined first so that there are no macro redefinition warnings.
Link: https://github.com/ClangBuiltLinux/linux/issues/1772
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Fixes: 59e2cf8d21e0 ("ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA")
Fixes: 1d2e9b67b001 ("ARM: 9265/1: pass -march= only to compiler")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Pull scheduler fixes from Borislav Petkov: - Make sure the scheduler doesn't use stale frequency scaling values when latter get disabled due to a value error - Fix a NULL pointer access on UP configs - Use the proper locking when updating CPU capacity * tag 'sched_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/aperfmperf: Erase stale arch_freq_scale values when disabling frequency invariance readings sched/core: Fix NULL pointer access fault in sched_setaffinity() with non-SMP configs sched/fair: Fixes for capacity inversion detection sched/uclamp: Fix a uninitialized variable warnings
Pull perf fix from Borislav Petkov: - Add Emerald Rapids model support to more perf machinery * tag 'perf_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/cstate: Add Emerald Rapids perf/x86/intel: Add Emerald Rapids