<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/arch, branch v5.9-rc7</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>Merge tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip</title>
<updated>2020-09-27T19:15:21+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2020-09-27T19:15:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=f8818559ca6251adbcd9408dc1ebe3b832f3e1d7'/>
<id>f8818559ca6251adbcd9408dc1ebe3b832f3e1d7</id>
<content type='text'>
Pull x86 fixes from Thomas Gleixner:
 "Two fixes for the x86 interrupt code:

   - Unbreak the magic 'search the timer interrupt' logic in IO/APIC
     code which got wreckaged when the core interrupt code made the
     state tracking logic stricter.

     That caused the interrupt line to stay masked after switching from
     IO/APIC to PIC delivery mode, which obviously prevents interrupts
     from being delivered.

   - Make run_on_irqstack_code() typesafe. The function argument is a
     void pointer which is then cast to 'void (*fun)(void *).

     This breaks Control Flow Integrity checking in clang. Use proper
     helper functions for the three variants reuqired"

* tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioapic: Unbreak check_timer()
  x86/irq: Make run_on_irqstack_cond() typesafe
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull x86 fixes from Thomas Gleixner:
 "Two fixes for the x86 interrupt code:

   - Unbreak the magic 'search the timer interrupt' logic in IO/APIC
     code which got wreckaged when the core interrupt code made the
     state tracking logic stricter.

     That caused the interrupt line to stay masked after switching from
     IO/APIC to PIC delivery mode, which obviously prevents interrupts
     from being delivered.

   - Make run_on_irqstack_code() typesafe. The function argument is a
     void pointer which is then cast to 'void (*fun)(void *).

     This breaks Control Flow Integrity checking in clang. Use proper
     helper functions for the three variants reuqired"

* tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioapic: Unbreak check_timer()
  x86/irq: Make run_on_irqstack_cond() typesafe
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: replace memmap_context by meminit_context</title>
<updated>2020-09-26T17:33:57+00:00</updated>
<author>
<name>Laurent Dufour</name>
<email>ldufour@linux.ibm.com</email>
</author>
<published>2020-09-26T04:19:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=c1d0da83358a2316d9be7f229f26126dbaa07468'/>
<id>c1d0da83358a2316d9be7f229f26126dbaa07468</id>
<content type='text'>
Patch series "mm: fix memory to node bad links in sysfs", v3.

Sometimes, firmware may expose interleaved memory layout like this:

 Early memory node ranges
   node   1: [mem 0x0000000000000000-0x000000011fffffff]
   node   2: [mem 0x0000000120000000-0x000000014fffffff]
   node   1: [mem 0x0000000150000000-0x00000001ffffffff]
   node   0: [mem 0x0000000200000000-0x000000048fffffff]
   node   2: [mem 0x0000000490000000-0x00000007ffffffff]

In that case, we can see memory blocks assigned to multiple nodes in
sysfs:

  $ ls -l /sys/devices/system/memory/memory21
  total 0
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node1 -&gt; ../../node/node1
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node2 -&gt; ../../node/node2
  -rw-r--r-- 1 root root 65536 Aug 24 05:27 online
  -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device
  -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index
  drwxr-xr-x 2 root root     0 Aug 24 05:27 power
  -r--r--r-- 1 root root 65536 Aug 24 05:27 removable
  -rw-r--r-- 1 root root 65536 Aug 24 05:27 state
  lrwxrwxrwx 1 root root     0 Aug 24 05:25 subsystem -&gt; ../../../../bus/memory
  -rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent
  -r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones

The same applies in the node's directory with a memory21 link in both
the node1 and node2's directory.

This is wrong but doesn't prevent the system to run.  However when
later, one of these memory blocks is hot-unplugged and then hot-plugged,
the system is detecting an inconsistency in the sysfs layout and a
BUG_ON() is raised:

  kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
  CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
  Call Trace:
    add_memory_resource+0x23c/0x340 (unreliable)
    __add_memory+0x5c/0xf0
    dlpar_add_lmb+0x1b4/0x500
    dlpar_memory+0x1f8/0xb80
    handle_dlpar_errorlog+0xc0/0x190
    dlpar_store+0x198/0x4a0
    kobj_attr_store+0x30/0x50
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1b0/0x290
    vfs_write+0xe8/0x290
    ksys_write+0xdc/0x130
    system_call_exception+0x160/0x270
    system_call_common+0xf0/0x27c

This has been seen on PowerPC LPAR.

The root cause of this issue is that when node's memory is registered,
the range used can overlap another node's range, thus the memory block
is registered to multiple nodes in sysfs.

There are two issues here:

 (a) The sysfs memory and node's layouts are broken due to these
     multiple links

 (b) The link errors in link_mem_sections() should not lead to a system
     panic.

To address (a) register_mem_sect_under_node should not rely on the
system state to detect whether the link operation is triggered by a hot
plug operation or not.  This is addressed by the patches 1 and 2 of this
series.

Issue (b) will be addressed separately.

This patch (of 2):

The memmap_context enum is used to detect whether a memory operation is
due to a hot-add operation or happening at boot time.

Make it general to the hotplug operation and rename it as
meminit_context.

There is no functional change introduced by this patch

Suggested-by: David Hildenbrand &lt;david@redhat.com&gt;
Signed-off-by: Laurent Dufour &lt;ldufour@linux.ibm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Reviewed-by: David Hildenbrand &lt;david@redhat.com&gt;
Reviewed-by: Oscar Salvador &lt;osalvador@suse.de&gt;
Acked-by: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Cc: "Rafael J . Wysocki" &lt;rafael@kernel.org&gt;
Cc: Nathan Lynch &lt;nathanl@linux.ibm.com&gt;
Cc: Scott Cheloha &lt;cheloha@linux.ibm.com&gt;
Cc: Tony Luck &lt;tony.luck@intel.com&gt;
Cc: Fenghua Yu &lt;fenghua.yu@intel.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com
Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Patch series "mm: fix memory to node bad links in sysfs", v3.

Sometimes, firmware may expose interleaved memory layout like this:

 Early memory node ranges
   node   1: [mem 0x0000000000000000-0x000000011fffffff]
   node   2: [mem 0x0000000120000000-0x000000014fffffff]
   node   1: [mem 0x0000000150000000-0x00000001ffffffff]
   node   0: [mem 0x0000000200000000-0x000000048fffffff]
   node   2: [mem 0x0000000490000000-0x00000007ffffffff]

In that case, we can see memory blocks assigned to multiple nodes in
sysfs:

  $ ls -l /sys/devices/system/memory/memory21
  total 0
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node1 -&gt; ../../node/node1
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node2 -&gt; ../../node/node2
  -rw-r--r-- 1 root root 65536 Aug 24 05:27 online
  -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device
  -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index
  drwxr-xr-x 2 root root     0 Aug 24 05:27 power
  -r--r--r-- 1 root root 65536 Aug 24 05:27 removable
  -rw-r--r-- 1 root root 65536 Aug 24 05:27 state
  lrwxrwxrwx 1 root root     0 Aug 24 05:25 subsystem -&gt; ../../../../bus/memory
  -rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent
  -r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones

The same applies in the node's directory with a memory21 link in both
the node1 and node2's directory.

This is wrong but doesn't prevent the system to run.  However when
later, one of these memory blocks is hot-unplugged and then hot-plugged,
the system is detecting an inconsistency in the sysfs layout and a
BUG_ON() is raised:

  kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
  CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
  Call Trace:
    add_memory_resource+0x23c/0x340 (unreliable)
    __add_memory+0x5c/0xf0
    dlpar_add_lmb+0x1b4/0x500
    dlpar_memory+0x1f8/0xb80
    handle_dlpar_errorlog+0xc0/0x190
    dlpar_store+0x198/0x4a0
    kobj_attr_store+0x30/0x50
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1b0/0x290
    vfs_write+0xe8/0x290
    ksys_write+0xdc/0x130
    system_call_exception+0x160/0x270
    system_call_common+0xf0/0x27c

This has been seen on PowerPC LPAR.

The root cause of this issue is that when node's memory is registered,
the range used can overlap another node's range, thus the memory block
is registered to multiple nodes in sysfs.

There are two issues here:

 (a) The sysfs memory and node's layouts are broken due to these
     multiple links

 (b) The link errors in link_mem_sections() should not lead to a system
     panic.

To address (a) register_mem_sect_under_node should not rely on the
system state to detect whether the link operation is triggered by a hot
plug operation or not.  This is addressed by the patches 1 and 2 of this
series.

Issue (b) will be addressed separately.

This patch (of 2):

The memmap_context enum is used to detect whether a memory operation is
due to a hot-add operation or happening at boot time.

Make it general to the hotplug operation and rename it as
meminit_context.

There is no functional change introduced by this patch

Suggested-by: David Hildenbrand &lt;david@redhat.com&gt;
Signed-off-by: Laurent Dufour &lt;ldufour@linux.ibm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Reviewed-by: David Hildenbrand &lt;david@redhat.com&gt;
Reviewed-by: Oscar Salvador &lt;osalvador@suse.de&gt;
Acked-by: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Cc: "Rafael J . Wysocki" &lt;rafael@kernel.org&gt;
Cc: Nathan Lynch &lt;nathanl@linux.ibm.com&gt;
Cc: Scott Cheloha &lt;cheloha@linux.ibm.com&gt;
Cc: Tony Luck &lt;tony.luck@intel.com&gt;
Cc: Fenghua Yu &lt;fenghua.yu@intel.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com
Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback</title>
<updated>2020-09-26T17:33:57+00:00</updated>
<author>
<name>Mikulas Patocka</name>
<email>mpatocka@redhat.com</email>
</author>
<published>2020-09-26T04:19:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a1cd6c2ae47ee10ff21e62475685d5b399e2ed4a'/>
<id>a1cd6c2ae47ee10ff21e62475685d5b399e2ed4a</id>
<content type='text'>
If we copy less than 8 bytes and if the destination crosses a cache
line, __copy_user_flushcache would invalidate only the first cache line.

This patch makes it invalidate the second cache line as well.

Fixes: 0aed55af88345b ("x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations")
Signed-off-by: Mikulas Patocka &lt;mpatocka@redhat.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Reviewed-by: Dan Williams &lt;dan.j.wiilliams@intel.com&gt;
Cc: Jan Kara &lt;jack@suse.cz&gt;
Cc: Jeff Moyer &lt;jmoyer@redhat.com&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Cc: Toshi Kani &lt;toshi.kani@hpe.com&gt;
Cc: "H. Peter Anvin" &lt;hpa@zytor.com&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: Matthew Wilcox &lt;mawilcox@microsoft.com&gt;
Cc: Ross Zwisler &lt;ross.zwisler@linux.intel.com&gt;
Cc: Ingo Molnar &lt;mingo@elte.hu&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2009161451140.21915@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If we copy less than 8 bytes and if the destination crosses a cache
line, __copy_user_flushcache would invalidate only the first cache line.

This patch makes it invalidate the second cache line as well.

Fixes: 0aed55af88345b ("x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations")
Signed-off-by: Mikulas Patocka &lt;mpatocka@redhat.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Reviewed-by: Dan Williams &lt;dan.j.wiilliams@intel.com&gt;
Cc: Jan Kara &lt;jack@suse.cz&gt;
Cc: Jeff Moyer &lt;jmoyer@redhat.com&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Cc: Toshi Kani &lt;toshi.kani@hpe.com&gt;
Cc: "H. Peter Anvin" &lt;hpa@zytor.com&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: Matthew Wilcox &lt;mawilcox@microsoft.com&gt;
Cc: Ross Zwisler &lt;ross.zwisler@linux.intel.com&gt;
Cc: Ingo Molnar &lt;mingo@elte.hu&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2009161451140.21915@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm/gup: fix gup_fast with dynamic page table folding</title>
<updated>2020-09-26T17:33:57+00:00</updated>
<author>
<name>Vasily Gorbik</name>
<email>gor@linux.ibm.com</email>
</author>
<published>2020-09-26T04:19:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d3f7b1bb204099f2f7306318896223e8599bb6a2'/>
<id>d3f7b1bb204099f2f7306318896223e8599bb6a2</id>
<content type='text'>
Currently to make sure that every page table entry is read just once
gup_fast walks perform READ_ONCE and pass pXd value down to the next
gup_pXd_range function by value e.g.:

  static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
                           unsigned int flags, struct page **pages, int *nr)
  ...
          pudp = pud_offset(&amp;p4d, addr);

This function passes a reference on that local value copy to pXd_offset,
and might get the very same pointer in return.  This happens when the
level is folded (on most arches), and that pointer should not be
iterated.

On s390 due to the fact that each task might have different 5,4 or
3-level address translation and hence different levels folded the logic
is more complex and non-iteratable pointer to a local copy leads to
severe problems.

Here is an example of what happens with gup_fast on s390, for a task
with 3-level paging, crossing a 2 GB pud boundary:

  // addr = 0x1007ffff000, end = 0x10080001000
  static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
                           unsigned int flags, struct page **pages, int *nr)
  {
        unsigned long next;
        pud_t *pudp;

        // pud_offset returns &amp;p4d itself (a pointer to a value on stack)
        pudp = pud_offset(&amp;p4d, addr);
        do {
                // on second iteratation reading "random" stack value
                pud_t pud = READ_ONCE(*pudp);

                // next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390
                next = pud_addr_end(addr, end);
                ...
        } while (pudp++, addr = next, addr != end); // pudp++ iterating over stack

        return 1;
  }

This happens since s390 moved to common gup code with commit
d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and
commit 1a42010cdc26 ("s390/mm: convert to the generic
get_user_pages_fast code").

s390 tried to mimic static level folding by changing pXd_offset
primitives to always calculate top level page table offset in pgd_offset
and just return the value passed when pXd_offset has to act as folded.

What is crucial for gup_fast and what has been overlooked is that
PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly.
And the latter is not possible with dynamic folding.

To fix the issue in addition to pXd values pass original pXdp pointers
down to gup_pXd_range functions.  And introduce pXd_offset_lockless
helpers, which take an additional pXd entry value parameter.  This has
already been discussed in

  https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1

Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Vasily Gorbik &lt;gor@linux.ibm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Reviewed-by: Gerald Schaefer &lt;gerald.schaefer@linux.ibm.com&gt;
Reviewed-by: Alexander Gordeev &lt;agordeev@linux.ibm.com&gt;
Reviewed-by: Jason Gunthorpe &lt;jgg@nvidia.com&gt;
Reviewed-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Reviewed-by: John Hubbard &lt;jhubbard@nvidia.com&gt;
Cc: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Dave Hansen &lt;dave.hansen@intel.com&gt;
Cc: Russell King &lt;linux@armlinux.org.uk&gt;
Cc: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
Cc: Will Deacon &lt;will@kernel.org&gt;
Cc: Michael Ellerman &lt;mpe@ellerman.id.au&gt;
Cc: Benjamin Herrenschmidt &lt;benh@kernel.crashing.org&gt;
Cc: Paul Mackerras &lt;paulus@samba.org&gt;
Cc: Jeff Dike &lt;jdike@addtoit.com&gt;
Cc: Richard Weinberger &lt;richard@nod.at&gt;
Cc: Dave Hansen &lt;dave.hansen@linux.intel.com&gt;
Cc: Andy Lutomirski &lt;luto@kernel.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: Borislav Petkov &lt;bp@alien8.de&gt;
Cc: Arnd Bergmann &lt;arnd@arndb.de&gt;
Cc: Andrey Ryabinin &lt;aryabinin@virtuozzo.com&gt;
Cc: Heiko Carstens &lt;hca@linux.ibm.com&gt;
Cc: Christian Borntraeger &lt;borntraeger@de.ibm.com&gt;
Cc: Claudio Imbrenda &lt;imbrenda@linux.ibm.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;	[5.2+]
Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Currently to make sure that every page table entry is read just once
gup_fast walks perform READ_ONCE and pass pXd value down to the next
gup_pXd_range function by value e.g.:

  static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
                           unsigned int flags, struct page **pages, int *nr)
  ...
          pudp = pud_offset(&amp;p4d, addr);

This function passes a reference on that local value copy to pXd_offset,
and might get the very same pointer in return.  This happens when the
level is folded (on most arches), and that pointer should not be
iterated.

On s390 due to the fact that each task might have different 5,4 or
3-level address translation and hence different levels folded the logic
is more complex and non-iteratable pointer to a local copy leads to
severe problems.

Here is an example of what happens with gup_fast on s390, for a task
with 3-level paging, crossing a 2 GB pud boundary:

  // addr = 0x1007ffff000, end = 0x10080001000
  static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
                           unsigned int flags, struct page **pages, int *nr)
  {
        unsigned long next;
        pud_t *pudp;

        // pud_offset returns &amp;p4d itself (a pointer to a value on stack)
        pudp = pud_offset(&amp;p4d, addr);
        do {
                // on second iteratation reading "random" stack value
                pud_t pud = READ_ONCE(*pudp);

                // next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390
                next = pud_addr_end(addr, end);
                ...
        } while (pudp++, addr = next, addr != end); // pudp++ iterating over stack

        return 1;
  }

This happens since s390 moved to common gup code with commit
d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and
commit 1a42010cdc26 ("s390/mm: convert to the generic
get_user_pages_fast code").

s390 tried to mimic static level folding by changing pXd_offset
primitives to always calculate top level page table offset in pgd_offset
and just return the value passed when pXd_offset has to act as folded.

What is crucial for gup_fast and what has been overlooked is that
PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly.
And the latter is not possible with dynamic folding.

To fix the issue in addition to pXd values pass original pXdp pointers
down to gup_pXd_range functions.  And introduce pXd_offset_lockless
helpers, which take an additional pXd entry value parameter.  This has
already been discussed in

  https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1

Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Vasily Gorbik &lt;gor@linux.ibm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Reviewed-by: Gerald Schaefer &lt;gerald.schaefer@linux.ibm.com&gt;
Reviewed-by: Alexander Gordeev &lt;agordeev@linux.ibm.com&gt;
Reviewed-by: Jason Gunthorpe &lt;jgg@nvidia.com&gt;
Reviewed-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Reviewed-by: John Hubbard &lt;jhubbard@nvidia.com&gt;
Cc: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Dave Hansen &lt;dave.hansen@intel.com&gt;
Cc: Russell King &lt;linux@armlinux.org.uk&gt;
Cc: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
Cc: Will Deacon &lt;will@kernel.org&gt;
Cc: Michael Ellerman &lt;mpe@ellerman.id.au&gt;
Cc: Benjamin Herrenschmidt &lt;benh@kernel.crashing.org&gt;
Cc: Paul Mackerras &lt;paulus@samba.org&gt;
Cc: Jeff Dike &lt;jdike@addtoit.com&gt;
Cc: Richard Weinberger &lt;richard@nod.at&gt;
Cc: Dave Hansen &lt;dave.hansen@linux.intel.com&gt;
Cc: Andy Lutomirski &lt;luto@kernel.org&gt;
Cc: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: Borislav Petkov &lt;bp@alien8.de&gt;
Cc: Arnd Bergmann &lt;arnd@arndb.de&gt;
Cc: Andrey Ryabinin &lt;aryabinin@virtuozzo.com&gt;
Cc: Heiko Carstens &lt;hca@linux.ibm.com&gt;
Cc: Christian Borntraeger &lt;borntraeger@de.ibm.com&gt;
Cc: Claudio Imbrenda &lt;imbrenda@linux.ibm.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;	[5.2+]
Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm</title>
<updated>2020-09-26T00:15:19+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2020-09-26T00:15:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=7c7ec3226f5f33f9c050d85ec20f18419c622ad6'/>
<id>7c7ec3226f5f33f9c050d85ec20f18419c622ad6</id>
<content type='text'>
Pull more kvm fixes from Paolo Bonzini:
 "Five small fixes.

  The nested migration bug will be fixed with a better API in 5.10 or
  5.11, for now this is a fix that works with existing userspace but
  keeps the current ugly API"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Add a dedicated INVD intercept routine
  KVM: x86: Reset MMU context if guest toggles CR4.SMAP or CR4.PKE
  KVM: x86: fix MSR_IA32_TSC read for nested migration
  selftests: kvm: Fix assert failure in single-step test
  KVM: x86: VMX: Make smaller physical guest address space support user-configurable
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull more kvm fixes from Paolo Bonzini:
 "Five small fixes.

  The nested migration bug will be fixed with a better API in 5.10 or
  5.11, for now this is a fix that works with existing userspace but
  keeps the current ugly API"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Add a dedicated INVD intercept routine
  KVM: x86: Reset MMU context if guest toggles CR4.SMAP or CR4.PKE
  KVM: x86: fix MSR_IA32_TSC read for nested migration
  selftests: kvm: Fix assert failure in single-step test
  KVM: x86: VMX: Make smaller physical guest address space support user-configurable
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'mips_fixes_5.9_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux</title>
<updated>2020-09-25T22:24:04+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2020-09-25T22:24:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=b463b6f69974867b3b5885de2f488d72e979a751'/>
<id>b463b6f69974867b3b5885de2f488d72e979a751</id>
<content type='text'>
Pull MIPS fixes from Thomas Bogendoerfer:

 - fixed FP register access on Loongsoon-3

 - added missing 1074 cpu handling

 - fixed Loongson2ef build error

* tag 'mips_fixes_5.9_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: BCM47XX: Remove the needless check with the 1074K
  MIPS: Add the missing 'CPU_1074K' into __get_cpu_type()
  MIPS: Loongson2ef: Disable Loongson MMI instructions
  MIPS: Loongson-3: Fix fp register access if MSA enabled
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull MIPS fixes from Thomas Bogendoerfer:

 - fixed FP register access on Loongsoon-3

 - added missing 1074 cpu handling

 - fixed Loongson2ef build error

* tag 'mips_fixes_5.9_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: BCM47XX: Remove the needless check with the 1074K
  MIPS: Add the missing 'CPU_1074K' into __get_cpu_type()
  MIPS: Loongson2ef: Disable Loongson MMI instructions
  MIPS: Loongson-3: Fix fp register access if MSA enabled
</pre>
</div>
</content>
</entry>
<entry>
<title>KVM: SVM: Add a dedicated INVD intercept routine</title>
<updated>2020-09-25T17:27:35+00:00</updated>
<author>
<name>Tom Lendacky</name>
<email>thomas.lendacky@amd.com</email>
</author>
<published>2020-09-24T18:41:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4bb05f30483fd21ea5413eaf1182768f251cf625'/>
<id>4bb05f30483fd21ea5413eaf1182768f251cf625</id>
<content type='text'>
The INVD instruction intercept performs emulation. Emulation can't be done
on an SEV guest because the guest memory is encrypted.

Provide a dedicated intercept routine for the INVD intercept. And since
the instruction is emulated as a NOP, just skip it instead.

Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Signed-off-by: Tom Lendacky &lt;thomas.lendacky@amd.com&gt;
Message-Id: &lt;a0b9a19ffa7fef86a3cc700c7ea01cb2731e04e5.1600972918.git.thomas.lendacky@amd.com&gt;
Signed-off-by: Paolo Bonzini &lt;pbonzini@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The INVD instruction intercept performs emulation. Emulation can't be done
on an SEV guest because the guest memory is encrypted.

Provide a dedicated intercept routine for the INVD intercept. And since
the instruction is emulated as a NOP, just skip it instead.

Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Signed-off-by: Tom Lendacky &lt;thomas.lendacky@amd.com&gt;
Message-Id: &lt;a0b9a19ffa7fef86a3cc700c7ea01cb2731e04e5.1600972918.git.thomas.lendacky@amd.com&gt;
Signed-off-by: Paolo Bonzini &lt;pbonzini@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>KVM: x86: Reset MMU context if guest toggles CR4.SMAP or CR4.PKE</title>
<updated>2020-09-25T12:56:35+00:00</updated>
<author>
<name>Sean Christopherson</name>
<email>sean.j.christopherson@intel.com</email>
</author>
<published>2020-09-23T21:53:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=8d214c481611b29458a57913bd786f0ac06f0605'/>
<id>8d214c481611b29458a57913bd786f0ac06f0605</id>
<content type='text'>
Reset the MMU context during kvm_set_cr4() if SMAP or PKE is toggled.
Recent commits to (correctly) not reload PDPTRs when SMAP/PKE are
toggled inadvertantly skipped the MMU context reset due to the mask
of bits that triggers PDPTR loads also being used to trigger MMU context
resets.

Fixes: 427890aff855 ("kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode")
Fixes: cb957adb4ea4 ("kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode")
Cc: Jim Mattson &lt;jmattson@google.com&gt;
Cc: Peter Shier &lt;pshier@google.com&gt;
Cc: Oliver Upton &lt;oupton@google.com&gt;
Signed-off-by: Sean Christopherson &lt;sean.j.christopherson@intel.com&gt;
Message-Id: &lt;20200923215352.17756-1-sean.j.christopherson@intel.com&gt;
Signed-off-by: Paolo Bonzini &lt;pbonzini@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Reset the MMU context during kvm_set_cr4() if SMAP or PKE is toggled.
Recent commits to (correctly) not reload PDPTRs when SMAP/PKE are
toggled inadvertantly skipped the MMU context reset due to the mask
of bits that triggers PDPTR loads also being used to trigger MMU context
resets.

Fixes: 427890aff855 ("kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode")
Fixes: cb957adb4ea4 ("kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode")
Cc: Jim Mattson &lt;jmattson@google.com&gt;
Cc: Peter Shier &lt;pshier@google.com&gt;
Cc: Oliver Upton &lt;oupton@google.com&gt;
Signed-off-by: Sean Christopherson &lt;sean.j.christopherson@intel.com&gt;
Message-Id: &lt;20200923215352.17756-1-sean.j.christopherson@intel.com&gt;
Signed-off-by: Paolo Bonzini &lt;pbonzini@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>KVM: x86: fix MSR_IA32_TSC read for nested migration</title>
<updated>2020-09-24T17:35:07+00:00</updated>
<author>
<name>Maxim Levitsky</name>
<email>mlevitsk@redhat.com</email>
</author>
<published>2020-09-21T10:38:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=ee6fa053019478918ca15eadaa93e516ddb9da8d'/>
<id>ee6fa053019478918ca15eadaa93e516ddb9da8d</id>
<content type='text'>
MSR reads/writes should always access the L1 state, since the (nested)
hypervisor should intercept all the msrs it wants to adjust, and these
that it doesn't should be read by the guest as if the host had read it.

However IA32_TSC is an exception. Even when not intercepted, guest still
reads the value + TSC offset.
The write however does not take any TSC offset into account.

This is documented in Intel's SDM and seems also to happen on AMD as well.

This creates a problem when userspace wants to read the IA32_TSC value and then
write it. (e.g for migration)

In this case it reads L2 value but write is interpreted as an L1 value.
To fix this make the userspace initiated reads of IA32_TSC return L1 value
as well.

Huge thanks to Dave Gilbert for helping me understand this very confusing
semantic of MSR writes.

Signed-off-by: Maxim Levitsky &lt;mlevitsk@redhat.com&gt;
Message-Id: &lt;20200921103805.9102-2-mlevitsk@redhat.com&gt;
Signed-off-by: Paolo Bonzini &lt;pbonzini@redhat.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
MSR reads/writes should always access the L1 state, since the (nested)
hypervisor should intercept all the msrs it wants to adjust, and these
that it doesn't should be read by the guest as if the host had read it.

However IA32_TSC is an exception. Even when not intercepted, guest still
reads the value + TSC offset.
The write however does not take any TSC offset into account.

This is documented in Intel's SDM and seems also to happen on AMD as well.

This creates a problem when userspace wants to read the IA32_TSC value and then
write it. (e.g for migration)

In this case it reads L2 value but write is interpreted as an L1 value.
To fix this make the userspace initiated reads of IA32_TSC return L1 value
as well.

Huge thanks to Dave Gilbert for helping me understand this very confusing
semantic of MSR writes.

Signed-off-by: Maxim Levitsky &lt;mlevitsk@redhat.com&gt;
Message-Id: &lt;20200921103805.9102-2-mlevitsk@redhat.com&gt;
Signed-off-by: Paolo Bonzini &lt;pbonzini@redhat.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>x86/ioapic: Unbreak check_timer()</title>
<updated>2020-09-23T20:44:56+00:00</updated>
<author>
<name>Thomas Gleixner</name>
<email>tglx@linutronix.de</email>
</author>
<published>2020-09-23T15:46:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=86a82ae0b5095ea24c55898a3f025791e7958b21'/>
<id>86a82ae0b5095ea24c55898a3f025791e7958b21</id>
<content type='text'>
Several people reported in the kernel bugzilla that between v4.12 and v4.13
the magic which works around broken hardware and BIOSes to find the proper
timer interrupt delivery mode stopped working for some older affected
platforms which need to fall back to ExtINT delivery mode.

The reason is that the core code changed to keep track of the masked and
disabled state of an interrupt line more accurately to avoid the expensive
hardware operations.

That broke an assumption in i8259_make_irq() which invokes

     disable_irq_nosync();
     irq_set_chip_and_handler();
     enable_irq();

Up to v4.12 this worked because enable_irq() unconditionally unmasked the
interrupt line, but after the state tracking improvements this is not
longer the case because the IO/APIC uses lazy disabling. So the line state
is unmasked which means that enable_irq() does not call into the new irq
chip to unmask it.

In principle this is a shortcoming of the core code, but it's more than
unclear whether the core code should try to reset state. At least this
cannot be done unconditionally as that would break other existing use cases
where the chip type is changed, e.g. when changing the trigger type, but
the callers expect the state to be preserved.

As the way how check_timer() is switching the delivery modes is truly
unique, the obvious fix is to simply unmask the i8259 manually after
changing the mode to ExtINT delivery and switching the irq chip to the
legacy PIC.

Note, that the fixes tag is not really precise, but identifies the commit
which broke the assumptions in the IO/APIC and i8259 code and that's the
kernel version to which this needs to be backported.

Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Reported-by: p_c_chan@hotmail.com
Reported-by: ecm4@mail.com
Reported-by: perdigao1@yahoo.com
Reported-by: matzes@users.sourceforge.net
Reported-by: rvelascog@gmail.com
Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Tested-by: p_c_chan@hotmail.com
Tested-by: matzes@users.sourceforge.net
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197769
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Several people reported in the kernel bugzilla that between v4.12 and v4.13
the magic which works around broken hardware and BIOSes to find the proper
timer interrupt delivery mode stopped working for some older affected
platforms which need to fall back to ExtINT delivery mode.

The reason is that the core code changed to keep track of the masked and
disabled state of an interrupt line more accurately to avoid the expensive
hardware operations.

That broke an assumption in i8259_make_irq() which invokes

     disable_irq_nosync();
     irq_set_chip_and_handler();
     enable_irq();

Up to v4.12 this worked because enable_irq() unconditionally unmasked the
interrupt line, but after the state tracking improvements this is not
longer the case because the IO/APIC uses lazy disabling. So the line state
is unmasked which means that enable_irq() does not call into the new irq
chip to unmask it.

In principle this is a shortcoming of the core code, but it's more than
unclear whether the core code should try to reset state. At least this
cannot be done unconditionally as that would break other existing use cases
where the chip type is changed, e.g. when changing the trigger type, but
the callers expect the state to be preserved.

As the way how check_timer() is switching the delivery modes is truly
unique, the obvious fix is to simply unmask the i8259 manually after
changing the mode to ExtINT delivery and switching the irq chip to the
legacy PIC.

Note, that the fixes tag is not really precise, but identifies the commit
which broke the assumptions in the IO/APIC and i8259 code and that's the
kernel version to which this needs to be backported.

Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Reported-by: p_c_chan@hotmail.com
Reported-by: ecm4@mail.com
Reported-by: perdigao1@yahoo.com
Reported-by: matzes@users.sourceforge.net
Reported-by: rvelascog@gmail.com
Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Tested-by: p_c_chan@hotmail.com
Tested-by: matzes@users.sourceforge.net
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197769
</pre>
</div>
</content>
</entry>
</feed>
