Pull powerpc fixes from Michael Ellerman:

 - Add perf support for emitting extended registers for power10.

 - A fix for CPU hotplug on pseries, where on large/loaded systems we
   may not wait long enough for the CPU to be offlined, leading to
   crashes.

 - Addition of a raw cputable entry for Power10, which is not required
   to boot, but is required to make our PMU setup work correctly in
   guests.

 - Three fixes for the recent changes on 32-bit Book3S to move modules
   into their own segment for strict RWX.

 - A fix for a recent change in our powernv PCI code that could lead to
   crashes.

 - A change to our perf interrupt accounting to avoid soft lockups when
   using some events, found by syzkaller.

 - A change in the way we handle power loss events from the hypervisor
   on pseries. We no longer immediately shut down if we're told we're
   running on a UPS.

 - A few other minor fixes.

Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.

* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
  powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
  powerpc/pseries: Do not initiate shutdown when system is running on UPS
  powerpc/perf: Fix soft lockups due to missed interrupt accounting
  powerpc/powernv/pci: Fix possible crash when releasing DMA resources
  powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
  powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
  powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
  powerpc/fixmap: Fix the size of the early debug area
  powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
  powerpc/kernel: Cleanup machine check function declarations
  powerpc: Add POWER10 raw mode cputable entry
  powerpc/perf: Add extended regs support for power10 platform
  powerpc/perf: Add support for outputting extended regs in perf intr_regs
  powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores

Pull x86 fix from Thomas Gleixner:
 "A single fix for x86 which removes the RDPID usage from the paranoid
  entry path and unconditionally uses LSL to retrieve the CPU number.

  RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid
  expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values
  and restores them either when leaving the run loop, on preemption or
  when going out to user space. MSR_TSX_AUX is part of that lazy MSR
  set, so after writing the guest value and before the lazy restore any
  exception using the paranoid entry will read the guest value and use
  it as CPU number to retrieve the GSBASE value for the current CPU when
  FSGSBASE is enabled. As RDPID is only used in that particular entry
  path, there is no reason to burden VMENTER/EXIT with two extra MSR
  writes. Remove the RDPID optimization, which is not even backed by
  numbers from the paranoid entry path instead"

* tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM

Pull x86 perf fix from Thomas Gleixner:
 "A single update for perf on x86 which has support for the broken down
  bandwith counters"

* tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown

Pull EFI fixes from Thomas Gleixner:

 - Enforce NX on RO data in mixed EFI mode

 - Destroy workqueue in an error handling path to prevent UAF

 - Stop argument parser at '--' which is the delimiter for init

 - Treat a NULL command line pointer as empty instead of dereferncing it
   unconditionally.

 - Handle an unterminated command line correctly

 - Cleanup the 32bit code leftovers and remove obsolete documentation

* tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: efi: remove description of efi=old_map
  efi/x86: Move 32-bit code into efi_32.c
  efi/libstub: Handle unterminated cmdline
  efi/libstub: Handle NULL cmdline
  efi/libstub: Stop parsing arguments at "--"
  efi: add missed destroy_workqueue when efisubsys_init fails
  efi/x86: Mark kernel rodata non-executable for mixed mode

Pull arm64 fixes from Catalin Marinas:

 - Allow booting of late secondary CPUs affected by erratum 1418040
   (currently they are parked if none of the early CPUs are affected by
   this erratum).

 - Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
   vdso_install' installs the 32-bit compat vdso when it is compiled.

 - Print a warning that untrusted guests without a CPU erratum
   workaround (Cortex-A57 832075) may deadlock the affected system.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  ARM64: vdso32: Install vdso32 from vdso_install
  KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
  arm64: Allow booting of late CPUs affected by erratum 1418040
  arm64: Move handling of erratum 1418040 into C code

Pull s390 fixes from Vasily Gorbik:

 - a couple of fixes for storage key handling relevant for debugging

 - add cond_resched into potentially slow subchannels scanning loop

 - fixes for PF/VF linking and to ignore stale PCI configuration request
   events

* tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix PF/VF linking on hot plug
  s390/pci: re-introduce zpci_remove_device()
  s390/pci: fix zpci_bus_link_virtfn()
  s390/ptrace: fix storage key handling
  s390/runtime_instrumentation: fix storage key handling
  s390/pci: ignore stale configuration request event
  s390/cio: add cond_resched() in the slow_eval_known_fn() loop

Pull kvm fixes from Paolo Bonzini:

 - PAE and PKU bugfixes for x86

 - selftests fix for new binutils

 - MMU notifier fix for arm64

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
  KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
  kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
  kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
  KVM: x86: fix access code passed to gva_to_gpa
  selftests: kvm: Use a shorter encoding to clear RAX

When an MMU notifier call results in unmapping a range that spans multiple
PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary,
since this avoids running into RCU stalls during VM teardown. Unfortunately,
if the VM is destroyed as a result of OOM, then blocking is not permitted
and the call to the scheduler triggers the following BUG():

 | BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394
 | in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper
 | INFO: lockdep is turned off.
 | CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1
 | Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
 | Call trace:
 |  dump_backtrace+0x0/0x284
 |  show_stack+0x1c/0x28
 |  dump_stack+0xf0/0x1a4
 |  ___might_sleep+0x2bc/0x2cc
 |  unmap_stage2_range+0x160/0x1ac
 |  kvm_unmap_hva_range+0x1a0/0x1c8
 |  kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8
 |  __mmu_notifier_invalidate_range_start+0x218/0x31c
 |  mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0
 |  __oom_reap_task_mm+0x128/0x268
 |  oom_reap_task+0xac/0x298
 |  oom_reaper+0x178/0x17c
 |  kthread+0x1e4/0x1fc
 |  ret_from_fork+0x10/0x30

Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we
only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier
flags.

Cc: <stable@vger.kernel.org>
Fixes: 8b3405e345b5 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-3-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.

Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.

Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull RISC-V fixes from Palmer Dabbelt:

 - The CLINT driver has been split in two: one to handle the M-mode
   CLINT (memory mapped and used on NOMMU systems) and one to handle the
   S-mode CLINT (via SBI).

 - The addition of SiFive's drivers to rv32_defconfig

* tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Add SiFive drivers to rv32_defconfig
  dt-bindings: timer: Add CLINT bindings
  RISC-V: Remove CLINT related code from timer and arch
  clocksource/drivers: Add CLINT timer driver
  RISC-V: Add mechanism to provide custom IPI operations