linux.git/arch/xtensa/platforms, branch v5.15

xtensa: xtfpga: Try software restart before simulating CPU reset

2021-10-05T19:19:05+00:00

Rebooting xtensa images loaded with the '-kernel' option in qemu does
not work. When executing a reboot command, the qemu session either hangs
or experiences an endless sequence of error messages.

  Kernel panic - not syncing: Unrecoverable error in exception handler

Reset code jumps to the CPU restart address, but Linux can not recover
from there because code and data in the kernel init sections have been
discarded and overwritten at this point.

XTFPGA platforms have a means to reset the CPU by writing 0xdead into a
specific FPGA IO address. When used in QEMU the kernel image loaded with
the '-kernel' option gets restored to its original state allowing the
machine to boot successfully.

Use that mechanism to attempt a platform reset. If it does not work,
fall back to the existing mechanism.

Signed-off-by: Guenter Roeck 
Signed-off-by: Max Filippov

xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF

2021-10-05T19:19:05+00:00

Use platform data to initialize xtfpga device drivers when CONFIG_USE_OF
is not selected. This fixes xtfpga networking when CONFIG_USE_OF is not
selected but CONFIG_OF is.

Signed-off-by: Max Filippov

Merge tag 'xtensa-20210902' of git://github.com/jcmvbkbc/linux-xtensa

2021-09-02T20:12:44+00:00

Pull Xtensa updates from Max Filippov:

 - fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG

 - add fairness to handling IRQs of the same priority

 - fix pointer usage before NULL check in ISS console driver

 - build system cleanups

* tag 'xtensa-20210902' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: move core-y in arch/xtensa/Makefile to arch/xtensa/Kbuild
  xtensa: build platform directories unconditionally
  xtensa: do not build variants directory
  xtensa: remove unneeded exports
  xtensa: ISS: don't use string pointer before NULL check
  xtensa: add fairness to IRQ handling
  xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG

xtensa: move core-y in arch/xtensa/Makefile to arch/xtensa/Kbuild

2021-08-11T18:37:13+00:00

Use obj-y to clean up Makefile.

Signed-off-by: Masahiro Yamada 
Message-Id: <20210811163731.186125-4-masahiroy@kernel.org>
Signed-off-by: Max Filippov

xtensa: ISS: don't use string pointer before NULL check

2021-08-11T18:36:10+00:00

Move strlen call inside the if block that checks string pointer for NULL.
While at it also fix the following coccicheck warning:

./arch/xtensa/platforms/iss/console.c:204:10-11: WARNING comparing
pointer to 0.

Reported-by: Abaci Robot 
Signed-off-by: Jiapeng Chong 
Signed-off-by: Max Filippov

tty: drop put_tty_driver

2021-07-27T10:17:21+00:00

put_tty_driver() is an alias for tty_driver_kref_put(). There is no need
for two exported identical functions, therefore switch all users of
old put_tty_driver() to new tty_driver_kref_put() and remove the former
for good.

Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: Geert Uytterhoeven 
Cc: Jeff Dike 
Cc: Richard Weinberger 
Cc: Anton Ivanov 
Cc: Chris Zankel 
Cc: Max Filippov 
Cc: Arnd Bergmann 
Cc: Greg Kroah-Hartman 
Cc: Samuel Iglesias Gonsalvez 
Cc: Jens Taprogge 
Cc: Karsten Keil 
Cc: Scott Branden 
Cc: Ulf Hansson 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: Heiko Carstens 
Cc: Vasily Gorbik 
Cc: Christian Borntraeger 
Cc: David Lin 
Cc: Johan Hovold 
Cc: Alex Elder 
Cc: Jiri Slaby 
Cc: Laurentiu Tudor 
Cc: Jiri Kosina 
Cc: David Sterba 
Cc: Shawn Guo 
Cc: Sascha Hauer 
Cc: Pengutronix Kernel Team 
Cc: Fabio Estevam 
Cc: NXP Linux Team 
Cc: Oliver Neukum 
Cc: Felipe Balbi 
Cc: Mathias Nyman 
Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Cc: Luiz Augusto von Dentz 
Acked-by: Alex Elder 
Acked-by: Christian Borntraeger 
Acked-by: Max Filippov 
Acked-by: David Sterba 
Acked-by: Samuel Iglesias Gonsálvez 
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20210723074317.32690-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: stop using alloc_tty_driver

2021-07-27T10:17:20+00:00

alloc_tty_driver was deprecated by tty_alloc_driver in commit
7f0bc6a68ed9 (TTY: pass flags to alloc_tty_driver) in 2012.

I never got into eliminating alloc_tty_driver until now. So we still
have two functions for allocating drivers which might be confusing. So
get rid of alloc_tty_driver uses to eliminate it for good in the next
patch.

Note we need to switch return value checking as tty_alloc_driver uses
ERR_PTR. And flags are now a parameter of tty_alloc_driver.

Cc: Richard Henderson (odd fixer:ALPHA PORT)
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: Geert Uytterhoeven 
Cc: "James E.J. Bottomley" 
Cc: Helge Deller 
Cc: Jeff Dike 
Cc: Richard Weinberger 
Cc: Anton Ivanov 
Cc: Chris Zankel 
Cc: Max Filippov 
Cc: Samuel Iglesias Gonsalvez 
Cc: Jens Taprogge 
Cc: Karsten Keil 
Cc: Ulf Hansson 
Cc: "David S. Miller" 
Cc: Jakub Kicinski 
Cc: Heiko Carstens 
Cc: Vasily Gorbik 
Cc: Christian Borntraeger 
Cc: Laurentiu Tudor 
Cc: Jiri Kosina 
Cc: David Sterba 
Cc: Shawn Guo 
Cc: Sascha Hauer 
Cc: Oliver Neukum 
Cc: Felipe Balbi 
Cc: Johan Hovold 
Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Cc: Luiz Augusto von Dentz 
Acked-by: Samuel Iglesias Gonsálvez 
Acked-by: Max Filippov 
Acked-by: David Sterba 
Acked-by: Christian Borntraeger 
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20210723074317.32690-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: don't store semi-state into tty drivers

2021-07-27T10:17:20+00:00

When a tty driver pointer is used as a return value of struct
console's device() hook, don't store a semi-state into global variable
which holds the tty driver. It could mean console::device() would return
a bogus value. This is important esp. after the next patch where we
switch from alloc_tty_driver to tty_alloc_driver. tty_alloc_driver
returns ERR_PTR in case of error and that might have unexpected results
as the code doesn't expect this.

Cc: Geert Uytterhoeven 
Cc: "James E.J. Bottomley" 
Cc: Helge Deller 
Cc: Chris Zankel 
Cc: Max Filippov 
Cc: Laurentiu Tudor 
Cc: Felipe Balbi 
Reviewed-by: Max Filippov 
Acked-by: Helge Deller 	# parisc
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20210723074317.32690-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

xtensa: ISS: don't panic in rs_init

2021-07-27T10:17:20+00:00

While alloc_tty_driver failure in rs_init would mean we have much bigger
problem, there is no reason to panic when tty_register_driver fails
there. It can fail for various reasons.

So handle the failure gracefully. Actually handle them both while at it.
This will make at least the console functional as it was enabled earlier
by console_initcall in iss_console_init. Instead of shooting down the
whole system.

We move tty_port_init() after alloc_tty_driver(), so that we don't need
to destroy the port in case the latter function fails.

Cc: Chris Zankel 
Cc: Max Filippov 
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Max Filippov 
Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20210723074317.32690-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-07-05T21:08:24+00:00

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 5.14-rc1.

  A bit more than normal, but nothing major, lots of cleanups.
  Highlights are:

   - lots of tty api cleanups and mxser driver cleanups from Jiri

   - build warning fixes

   - various serial driver updates

   - coding style cleanups

   - various tty driver minor fixes and updates

   - removal of broken and disable r3964 line discipline (finally!)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits)
  serial: mvebu-uart: remove unused member nb from struct mvebu_uart
  arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
  dt-bindings: mvebu-uart: fix documentation
  serial: mvebu-uart: correctly calculate minimal possible baudrate
  serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
  serial: mvebu-uart: fix calculation of clock divisor
  tty: make linux/tty_flip.h self-contained
  serial: Prefer unsigned int to bare use of unsigned
  serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
  serial: qcom_geni_serial: use DT aliases according to DT bindings
  Revert "tty: serial: Add UART driver for Cortina-Access platform"
  tty: serial: Add UART driver for Cortina-Access platform
  MAINTAINERS: add me back as mxser maintainer
  mxser: Documentation, fix typos
  mxser: Documentation, make the docs up-to-date
  mxser: Documentation, remove traces of callout device
  mxser: introduce mxser_16550A_or_MUST helper
  mxser: rename flags to old_speed in mxser_set_serial_info
  mxser: use port variable in mxser_set_serial_info
  mxser: access info->MCR under info->slock
  ...