Pull Xtensa updates from Max Filippov:

 - switch xtensa arch to the generic noncoherent direct mapping
   operations

 - add support for DMA_ATTR_NO_KERNEL_MAPPING attribute

 - clean up users of platform/hardware.h in generic Xtensa code

 - fix assembly cache maintenance code for long cache lines

 - rework noMMU cache attributes initialization

 - add big-endian HiFi2 test_kc705_be CPU variant

* tag 'xtensa-20180820' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add test_kc705_be variant
  xtensa: clean up boot-elf/bootstrap.S
  xtensa: make bootparam parsing optional
  xtensa: drop variant IRQ support
  xtensa: drop unneeded platform/hardware.h headers
  xtensa: move PLATFORM_NR_IRQS to Kconfig
  xtensa: rework {CONFIG,PLATFORM}_DEFAULT_MEM_START
  xtensa: drop unused {CONFIG,PLATFORM}_DEFAULT_MEM_SIZE
  xtensa: rework noMMU cache attributes initialization
  xtensa: increase ranges in ___invalidate_{i,d}cache_all
  xtensa: limit offsets in __loop_cache_{all,page}
  xtensa: platform-specific handling of coherent memory
  xtensa: support DMA_ATTR_NO_KERNEL_MAPPING attribute
  xtensa: use generic dma_noncoherent_ops

This switches xtensa arch to the generic noncoherent direct mapping
operations, adds support for DMA_ATTR_NO_KERNEL_MAPPING attribute and
allows for platform-specific handling of coherent memory.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

If an xtensa core provides an additional IRQ controller it should be
treated as a separate piece of hardware and be driven by an irqchip
driver.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

platform/hardware.h no longer supply any information for processor.h,
vectors.h, setup.c or vmlinux.lds.S, don't include it.
This header is now empty in the platforms/iss, so remove it altogether.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Drop PLATFORM_DEFAULT_MEM_START from the platform/hardware.h headers.
Provide definition of CONFIG_DEFAULT_MEM_START always, allow changing it
only in noMMU configurations when PLATFORM_WANT_DEFAULT_MEM is selected.
Change prompt and description so that it's clear that it controls
PAGE_OFFSET and PHYS_OFFSET.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...

Marking default memory region as cached is not always sufficient and is
not flexible. Allow specifying cache attributes for the whole memory
address space with new config entry MEMMAP_CACHEATTR. Apply it after
cache initialization.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Cache invalidation macros use cache line size to iterate over
invalidated cache lines, assuming that all cache ways are invalidated by
single instruction, but xtensa ISA recommends to not assume that for
future compatibility:
  In some implementations all ways at index Addry-1..z are invalidated
  regardless of the specified way, but for future compatibility this
  behavior should not be assumed.

Iterate over all cache ways in ___invalidate_icache_all and
___invalidate_dcache_all.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

When building kernel for xtensa cores with big cache lines (e.g. 128
bytes or more) __loop_cache_all and __loop_cache_page may generate
assembly instructions with immediate fields that are too big. This
results in the following build errors:

  arch/xtensa/mm/misc.S: Assembler messages:
  arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '256'
  arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '384'
  arch/xtensa/kernel/head.S: Assembler messages:
  arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '256'
  arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '384'
  arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '256'
  arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '384'
  arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '256'
  arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '384'

Add parameter max_immed to these macros and use it to limit values of
immediate operands. Extract common code of these macros into the new
macro __loop_cache_unroll.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>